• Carbon letters
• /
• 제18권
• /
• pp.56-61
• /
• 2016

Cellulose fibers were stabilized by treatment with an electron-beam (E-beam). The properties of the stabilized fibers were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The E-beam-stabilized cellulose fibers were carbonized in N₂ gas at 800℃ for 1 h, and their carbonization yields were measured. The structure of the cellulose fibers was determined to have changed to hemicellulose and cross-linked cellulose as a result of the E-beam stabilization. The hemicellulose decreased the initial decomposition temperature, and the cross-linked bonds increased the carbonization yield of the cellulose fibers. Increasing the absorbed E-beam dose to 1500 kGy increased the carbonization yield of the cellulose-based carbon fiber by 27.5% upon exposure compared to untreated cellulose fibers.

• Carbon letters
• /
• 제28권
• /
• pp.66-71
• /
• 2018

To improve the flame retardant performance of cellulose fibers, fluorine functional groups were introduced under various controlled fluorination conditions. The properties of the fluorinated cellulose fibers were analyzed by X-ray photoelectron spectroscopy and a thermogravimetric analysis. The fluorine functional group content in the fluorinated cellulose fibers increased with an increase in the fluorination temperature. However, the fluorination reaction increased the char yield and decreased the rate of degradation of the cellulose fibers by introducing donors, enabling the formation of a thick and compact char layer. Therefore, the flame retardant properties of cellulose fibers were improved following the fluorination treatment.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.52-60
• /
• 2015

The present study aims to the use of carboxymenthyl cellulose (CMC) improving the ability of fiber in the dyeing process. Cellulose was extracted from banana leaves by NaOH and then modified by reacting with chloroacetic acid to obtain the carboxymenthyl cellulose. The effect of carboxymenthyl cellulose contents on the mechanical properties and dye absorption were also investigated. Then, CMC were blend with polypropylene (grade 561R) at 1%, 3% and 5% by weight ratio. The fibers were obtained from single screw extruder. The results show that the mechanical properties of the product decreased when increased the amount of CMC in the fiber product. After dyeing, the dye however were absorbed by the CMC-PP fibers more than the original PP fibers. The absorption of dye on the CMC-PP fibers increased significantly with the CMC ratio.

• Carbon letters
• /
• 제16권3호
• /
• pp.203-210
• /
• 2015

This study fabricated low thermal conductive polyacrylonitrile (PAN)-based carbon fibers containing cellulose particles while maintaining their mechanical properties. The high thermal conductivity of carbon fibers limits their application as a high temperature insulator in various systems such as an insulator for propulsion parts in aerospace or missile systems. By controlling process parameters such as the heat treatment temperature of the cellulose particles and the amount of cellulose added, the thermal and mechanical properties of the PAN-based carbon fibers were investigated. The results show that it is possible to manufacture composite carbon fibers with low thermal conductivity. That is, thermal conductivities were reduced by the cellulose particles in the PAN based carbon fibers while at the same time, the tensile strength loss was minimized, and the tensile modulus increased.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.95-102
• /
• 2005

Sodium cellulose carbonate (CC-Na) dissolved in $8.5\;wt\%$ NaOH/ZnO (100/2-3, w/w) aqueous solution was spun into some acidic coagulant systems. Diameter of regenerated cellulose fibers obtained was in the range of $15-50\;{\mu}m$. Serrated or circular cross sectional views were obtained by controlling salt concentration or acidity in the acid/salt/water coagulant systems. Velocity ratio of take-up to spinning was controlled up to 4/1 with increasing spinning velocity from 5 to 40 m/min. Skin structure of was developed at lower acidity or higher concentration of coagulants. Fineness, tenacity and elongation of the regenerated cellulose fibers were in the range of 1.5-27 denier, 1.2-2.2 g/d, and $8-11.3\;\%$, respectively. All of CC-Na and cellulose fibers spun from CC-Na exhibited cellulose II crystalline structure. Crystallinity index was increased with increasing take-up speed.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.22-40
• /
• 2015

Cellulose fibers is one of the most abundant in nature. It has many distinctive features: abundant in nature, biodegradable, non-toxic, eco-friendly, sustainable, easy to fabricate, hydrophilic, and cost-effective. Cellulose fibers, known as pulp, is produced from cellulose-containing materials by the pulping process. As the raw material, wood has been most commonly used while recycled pulp has been also used to some degree. Thus, pulp usually refers to wood pulp. Generally, the pulp and paper industry is regarded as the commodity market where the cost should be much more important than the quality. It also belongs to a mature market where the growth is slow, or even in decline. Accordingly, technological development has been rather stagnant for the industry. Recently, however, the pulp and paper industry has faced very serious challenges. First, due to digital technology, there has been a steady decline in the need for pulp and paper products. The digital industry has continuously replaced printed products such as books, newspapers, and magazines. Second, there has been a trend initiated by developed countries to limit the use of wood as the raw material for the sake of environmental protection. This forces the industry to find a more efficient use of wood pulp as well as finding alternative, non-wood sources. Third, as an individual becomes wealthier and more conscious of health-care, the quality of a product becomes more important than the cost. Thus, a paradigm shift is needed from the cost-conscientious to the quality conscientious. The objective of this article is to review the technologies aimed at engineering cellulose fibers for producing high-value added paper products.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.934-937
• /
• 2007

This study focused on investigating the effect of aligned cellulose fibers to the performance of EAPap actuator. The performance of EAPap is dependant on the material direction of cellulose film. Electrospinning was used to improve material directionality of EAPap. DMAc cellulose solution which cotton pulp was resolved in DMAc solvent was used for electrospinning cellulose film. To increase directionality of nano fibers, the Electrospun film was stretched by 10 % strain during drying process. Induced in-plane strain of Electrospun EAPap was proportional to the applied voltage and larger than that of spincast EAPap. It is concluded that the performance of EAPap was improved by aligning cellulose fibers.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.185-192
• /
• 1997

The combustion of cellulose insulation treated with Borax, Boric acid and Aluminum Sulfate as combustion retardants is examined by candle type combustion tester. The cellulose fibers in cellulose insulation are classified by diameter as less than 0.2mm, 0.2mm-0.5mm, 0.5mm-2mm and more than 2mm. The burning behavior of cellulose insulation are studied by LOI (Limit Oxygen Index: Beginning point of smoldering), L- point (Lower point of combustion transition from smoldering- flaming to flaming combustion), LOI, L-point and H-point rise with the increasing particle size of cellulose fibers because thermal decomposition rate of cellulose fiber decreases. The phenomena of combustion transition from smoldering to flaming combustion are determined by the generating rate of combustible gas and the formation rate of combustible gas mixture within the zone of cellulose fiber heated.

• Structural Engineering and Mechanics
• /
• 제92권1호
• /
• pp.89-97
• /
• 2024

Discarded cigarette butts in the environment have caused significant pollution. Therefore, providing solutions to address these environmental issues is of great importance. Concrete is known as one of the most widely used materials around the world. Hence, this study investigates the feasibility of using cigarette butts to product concrete. For this purpose, cellulose acetate fibers obtained from cigarette butt filters were added to silica fume concrete in 10 different volume ratios. Then, the mechanical properties of the concrete samples, including compressive strength, Brazilian tensile strength, and flexural tensile strength, were examined. Based on the results, adding fibers to silica fume concrete improved the mechanical properties of the concrete. Among the 10 mixing designs, adding 0.2% by volume of fibers to silica fume concrete yielded the highest compressive and tensile strengths. In other words, adding 0.2% by volume of fibers resulted in a 16% and 34% increase in compressive strength and a 70% and 38% increase in Brazilian tensile strength at 7 and 28 days, respectively, compared to the state without cellulose acetate fibers. Additionally, the flexural tensile stress capacity increased by 56%. Furthermore, the vertical deformation tolerance in beam specimens increased by 287%, and the energy absorption capacity of the concrete beam also significantly increased. Consequently, along with the significant improvement in the mechanical properties of concrete, this study proposes a new and practicalstrategy to addressthe environmental issues caused by waste cigarette butts.