• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.21-32
• /
• 1981

Recent trends in design standards development in some European countries and U.S.A. have encouraged the use of probabilistic limit sate design concepts. Reliability based design criteria such as LSD, LRFD, PBLSD, adopted in those advanced countries have the potentials that they afford for symplifying the design process and placing it on a consistent reliability bases for various construction materials. A reliability based design criteria for RC flexural members are proposed in this study. Lind-Hasofer's invariant second-moment reliability theory is used in the derivation of an algorithmic reliability analysis method as well as an iterative determination of load and resistance factors. In addition, Cornell's Mean First-Order Second Moment Method is employed as a practical tool for the approximate reliability analysis and the derivation of design criteria. Uncertainty measures for flexural resistance and load effects are based on the Ellingwood's approach for the evaluation of uncertainties of loads and resistances. The implied relative safety levels of RC flexural members designed by the strength design provisions of the current standard code were evaluated using the second moment reliability analysis method proposed in this study. And then, resistance and load factors corresponding to the target reliability index(${\beta}=4$) which is considered to be appropriate level of reliability considering our practices are calculated by using the proposed methods. These reliability based factors were compared to those specified by our current ultimate strength design provisions. It was found that the reliability levels of flexural members designed by current code are not appropriate, and the code specified resistance and load factors were considerably different from the reliability based resistance and load factors proposed in this study.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.191-204
• /
• 1994

Due to its topographic complexities and various climatical condition, Korea exhibits diverse forest types. Dominant tree species in this zone are Quercus spp., Betula spp., Zelkova spp., Fraxinus spp., Pinus densiflora, Pinus koraiensis, and Pinus thunbergii ete. Genetic conservation in forest species in Korea there are three ways ; one is in situ, other is ex situ and third is in-facility conservation. In situ conservation include that are the present status of conservation of rare and endangered flora and ecosystem, the reserved forest, the national and provincial park, and the gene pool of natural forests. Ex situ conservation means to be established the new forest from in situ forest stands, progeny and provenance test populations, seed orchard and clone banks, and gene conservation in-facility. As a tool for low temperature storage, several aspects on in vitro system were studied ; (1) establishment of in vitro cultures from juvenile and/or rejuvenated tissues, (2) induction of multiple shoots from the individual micropropagules, (3) elongation of the proliferated shoots. Studies on cold storage for short-and long-term maintenance of in vitro cultures under $4^{\circ}C$ in the refrigerator were conducted. For the cryopreservation at $-196^{\circ}C$, various factors affecting survivability of the plant materials are being examined. The necessity of gene conservation of forest trees is enlarged not only to increase the adaptability for various environments but also to gain the breeding materials in the future. For effective gene conservation of forest trees, I would like to suggest followings ; 1. Forest stands reserved for other than the gene conservation purposes such as national parks should be investigated by botanical and gene-ecological studies for selecting bio-diversity and gene conservation stands. 2. Reserved forest for gene pool should be extented both economically important tree spp. and non-economical species. 3. Reserved forest for progeny test and clone bank should be systematically investigated for the use of Ex situ forest gene conservation. 4. We have to find out a new methodology of genetic analysis determining the proper and effective size of subpopulation for in situ gene conservation. 5. We should develop a new tree breeding systems for successful gene conservation and utilization of the genetic resources. 6. New method of in-facility gene conservation using advanced genetic engineering should be developed to save time and economic resources. 7. For the conservation of species with short-life span of seed or shortage of knowledge of seed physiology, tissue culture techniques will be played a great role for gene conservation of those species. 8. It is are very useful conservation not only of genes but of genotypes which were selected already by breeding program. 9. Institutional and administrative arrangements including legistlation must be necessarily taken for gene conservation of forest trees. 10. It is national problems for conservation of forest resources which have been rapidly destroyed because of degenerating environmental condition and of inexperienced management system of bio-diversity and gene conservation. 11. In order to international cooperation for exchanging data of bio-diversity and gene conservation, we should connect to international net works as soon as possible.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.123-134
• /
• 1998

The study was performed to investigate the differences among various evaluation criteria for noise-induced hearing loss(NIHL). The subjects were 100 workers who had received detailed audiometric examinations after the periodic annual examination for hearing loss. The evaluation criteria included were as follows: The criterion I was NIHL of 50dB or greater at 4,000Hz in either ear which is one of the legal requirements for determining occupational hearing loss in Korea. The criterion II was NIHL of 40dB or greater by 4-divided classification(a+b+c+d/4 at 500Hz(a), 1,000Hz(b), 2,000Hz(c), 4,000Hz(d)) which is also one of the legal requirements for determining occupational hearing loss in Korea. The criterion III was NIHL of 31dB of greater by 6-divided classification(a+2b+2c+d/6) which is the workers' compensation standard. The criterion IV was NIHL of 40dB or greater by 6-divided classification(a+2b+2c+d/6), the criterion used to prohibite workers to be employed in the noisy workplace. The criterion V was NIHL of 40dB or greater by 3-divided classification(a+b+c/3) which is the guideline of the Japanes Labour Department. The results were as follows; 1. The percentage of workers with NIHL by the criterion I was the highest(96%) and covered all workers with NIHL diagnosed by other criteria. Therefore, this criterion was the most sensitive one for early detection of NIHL among various evaluation criteria. 2. The percentage of workers with NIHL by the criterion II was 29% of the subjects, but all of them could be diagnosed as having NIHL by the criterion I and 33.1% of the NIHL by the criterion III could not be covered by the criterion II. Thus, this criterion was not considered suitable as an initial step for determining occupational hearing loss. 3. The percentage of workers with NIHL by the criterion III was 45% of the subjects. This percentage was 46.9% of the NIHL by the criterion I and was estimated to cover 3.6% of all noise exposed workers. 4. The percentage of workers with NIHL by the criterion IV was 28% of the subjects, but 37.8% of the NIHL by the criterion III and 70.8% of the NIHL by the criterion I were not covered by the criterion. Therefore, these workers could have been employed in the noisy workplaces. 5. Employed relocation which was one of the post management methods was an option in the criterion I in Korea and in the criterion V in Japan. The number of NIHL by the criterion I was 6.7times greater than that by the criterion V. Thus, although employee relocation was not used exclusively, many more workers with NIHL could have been relocated. In conclusion, this study revealed that the criteria being used for managing occupational hearing loss showed a lack uniformity among them. In addition, since these criteria are all relied on the total threshold shifts caused by the noise exposure at the time of hearing test with no consideration given to the past noise exposure history nor age, it can be said that they are not an effective tool for occupational hearing loss management. Since legal requirements are usually followed after being diagnosed as having NIHL, it is recommended that a uniform diagnostic criterion should be used to minimize confusion. Pre-employment hearing tests should also be utilized so as to managing occupational hearing loss after employment rather than being used as a legal roadblock of prohibiting workers with mild hearing loss from being employed. Thus, what is needed is an establishment of a rational criterion for occupational hearing loss management rather than for legal requirements.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.1
• /
• pp.29-36
• /
• 2007

This study was carried out to develop a water quality simulation model for the evaluation of an ungauged watershed. For this purpose, the WASP5 model was selected and modified. The model consists of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. The Geum River Estuary watershed was selected to calibrate and verify the Modified-WASP5. The LOAD-M model was established using field data of water quality and quantity at the gauging stations of the watershed and was applied to the ungauged watersheds, taking the watershed properties into consideration. The result of water quality simulation using Modified-WASP5 shows that the observed average BOD data from Gongju and Ganggyeong were 2.6 mg/L and 2.8 mg/L, and the simulated data were 2.5 mg/L and 2.4 mg/L, respectively. Generally, simulation results were in good agreement with the observed data. This study focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.399-412
• /
• 2011

A DEM (digital elevation model) is produced using a digital topographic map and is now a commonly used tool in geologic surveys. This study aimed to clarify the relationship between knickpoints and faults in the Namdae stream by analyzing a DEM of the area. The Namdae drainage basin was divided into three subbasins (S1, S2 and S3) and their knickpoints developed for the middle to mid-upper regions were extracted from the DEM. The relative steepness Ks and concavity depending on the incision rate was higher in S1 than in S2 and S3 regions. We assumed that the incision rate caused by active erosion resulted from several faults crossing the basins rather than differences in rock types. There are 77 knickpoints in the Namdae drainage area, including the low-ranking branch, and 24 of thses are on the main river system (S1, S2, S3). Of these 77 knickpoints, 27 (38%) are matched by faults, and from the three basins, 13 (54%) correspond with faults, indicating that the knickpoints are connected closely with the faults. For example the average Ks (relative steepness), was 38.8, but in the overlapping area of the Samdang and Doocheon faults the Ks value was 42.99~43.39. We suggest that the faults resulted in geomorphic deformation such as the high-Ksn knickpoints. There was little evdence of relationship between the knickpoints and rock boundaries, with 54% of the knickpoints distributed on the S1, S2, and S3 subbasins. We concluded that the drainage basin knickpoints are the result of fault movement and are a type of geomorphologic deformation that could be useful for surveying Quaternary faults or fault extension.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.289-300
• /
• 2009

The Geodo mine area, had been developed for Fe and Cu ores since 1963 and abandoned in recent decades, is located in the central part of the Taebaeksan mineralized district. This area comprises of the Jangsan, Myobong, Pungchon, Hwajeol, Dongjeom, and Dumugol Formations in ascending stratigraphic order. These Formations were intruded by the Cretaceous Eopyeong granitoids that appears to produce the Geodo skarn. Their compositions are relatively oxidized quartz monzodiorite to granodiorite (magnetite series, $Fe_2O_3/FeO=0.3{\sim}1.1$). Mineralizations related skarn deposit occur in the Myobong, Pungchon, and Hwajeol Formations. The proximal skarn is zoned from andraditic garnet ($Ad_{44-95}Gr_{1-53}$) predominant adjacent to the Eopyeong granitoids to diopsidic pyroxene ($Hd_{10-100}Di_{0-89}$) predominant away from the one. The differential proportion of garnet and pyroxene is generated by water/rock ratio and their source, such as magmatic and meteoric water. This is useful tool for assessment the overall oxidation state of the entire skarn system. Gold occurs in proximal red to brownish garnet skarn, and genetically associated with Bi- and Te-bearing minerals. Skarn deposit developed in the Geodo mine area is considered as oxidized Au skarn category, based on chemical composition of the Eopyeong granitoids, zonation of skarn, and gold occurrences. Garnet-rich skarn zone will be the main target for exploration of gold in the study area. However, it is needed to the detailed survey on vertical zonation of this area as well as lateral zonation. The result of this survey would provide an important basis for the exploration of the skarn Au deposit in the Geodo mine area.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.376-382
• /
• 2015

Dollar spot, caused by Sclerotinia homoeocarpa, is the major disease in cool-season turfgrasses. Understanding the distribution of this pathogen in soil and thatch is important to developing disease control strategies. In this study, toothpicks were used to detect S. homoeocarpa in the turfgrass canopy, thatch, and soil at different distances from dollar spot infection centers. The effect of penetrant and contact fungicide applications with different water volumes on distribution of S. homoeocarpa was also investigated. S. homoeocarpa was detected in 100% of samples taken from the leaf canopy, 83.3% in thatch area, and 0% in the soil from within the infection center. S. homoeocarpa was isolated in 100% of samples taken from the edge of the infection center, but was only detected in 13% of the samples taken at 1.5 cm away from the infection center edge. S. homoeocarpa was isolated at a higher frequency in the propiconazole treated plots than those treated with chlorothalonil and was not detected in leaf canopy samples when either fungicides was applied with 6.78 L of water. In conclusion, the toothpick-aided detection technique has improved our understanding of S. homoeocarpa epidemiology and could be used as a diagnostic tool to detect for fungicide resistance on golf courses.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.

• Sleep Medicine and Psychophysiology
• /
• v.12 no.1
• /
• pp.27-31
• /
• 2005

Objectives: We attempted to compare the performance of 2 commercially available actigraphies with focus on sleep parameters, using polysomnography as standard comparison tool. Methods: Fourteen normal volunteers (5 males and 9 females, mean age of $28{\pm}4.6\;years$) participated in this study. All the participants went through one night of polysomnography, simultaneously wearing 2 different kinds of actigraphies on each wrist. Polysomnographic and actigraphic data were stored, downloaded, and processed according to standard protocols and then statistically compared. Results: Both $ActiWatch^{(R)}$ and $SleepWatch^{(R)}$ tended to overestimate the total sleep time, compared to the polysomnography. $SleepWatch^{(R)}$ tended to underestimate the sleep latency. The two actigraphs and the polysomnograph did not show significant difference of sleep efficiency, when compared with one another. In addition, all of the sleep parameters from the instruments showed linear correlations except in $SleepWatch^{(R)}'s$ sleep latency. The sleep parameters from the two actigraphs did not show much noteworthy difference, and linear relationships were found between the sleep parameters from the two actigraphs. There was no significant distinction in the results of the two different actigraphs. Conclusion: The results of two actigraphies can be used interchangeably since the sleep parameters of the two different actigraphies do not show significant differences statistically. Overall, it is not legitimate to use actigraphy as a substitute for polysomnography. However, since sleep parameters except sleep latency show linear correlations, actigraphy might possibly be used to follow up patients after polysomnography.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.137-155
• /
• 1999

Recently, Televiewer(Borehole Acoustic Scanner(Televiewer)) has come to be widely used specially for the general engineering construction design. The Televiewer tool using a focussed acoustic beam is to detect the amplitude and traveltime of each reflected acoustic signal at the wall, resulting in the amplitude- and traveltime image respectively. Fractures can be well detected, because they easily scatter the acoustic energy due to the highly narrow beam. In addition, the drilling work will rough the borehole wall so that the acoustic energy can be scattered simply due to the roughness of the wall. Thus, the amplitude level can be directed associated with the elastic properties(impedance) and the hardness of the rock as well. Meanwhile, the traveltime image provides an information about the borehole shape and can be converted to a high precision 3D caliper log(max. 288 arms). In this paper, based on the high resolution of Televiewer images, general evaluation methods are illustrated to derive very reliable rock parameters.