• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.448-453
• /
• 2008

This study describes design and development techniques of estimation models for process modeling. One case study is undertaken to design a model using standard gas furnace data. Neural networks (NN) and genetic programming (GP) are each employed to model the crucial relationships between input factors and output responses. In the case study, two models were generated by using 70% training data and evaluated by using 30% testing data for genetic programming and neural network modeling. The model performance was compared by using RMSE values, which were calculated based on the model outputs. The average RMSE for training and testing were 0.8925 (training) and 0.9951 (testing) for the NN model, and 0.707227 (training) and 0.673150 (testing) for the GP model, respectively. As concern the results, the NN model has a strong advantage in model training (using the all data for training), and the GP model appears to have an advantage in model testing (using the separated data for training and testing). The performance reproducibility of the GP model is good, so this approach appears suitable for modeling physical fabrication processes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.5
• /
• pp.496-510
• /
• 2016

Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.4
• /
• pp.378-388
• /
• 2016

As the needs for the mega-sized, high-rise and irregular shape of building increase, domestic application of BIM in construction industry is increasing in recent years. In this circumstance, interests in BIM modeling and modeling detail level have been also increased. BIM that is based on a three-dimensions, requires a specific and precise building expressions. And model expression level required for each phase such as design, construction, and maintenance of the construction project could be different as its needs. Because that it is not clear to define the criteria for the expression level of construction BIM model, It is difficult to decide how detail and what to model is appropriate in the practical application of BIM model. It could be the reason why the productivity in construction project became lower and lower. In this study we consider the way how to improve the productivity of BIM and analyze the appropriate representation level of construction BIM model through the experts' survey. The results of study could suggest the basis for an appropriate expression level of construction BIM model.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1924-1934
• /
• 2023

In this study, the probabilistic fatigue life model for Ni-base alloys was developed based on the Weibull distribution using statistical analysis of fatigue data reported in NUREG/CR-6909 and the new fatigue data of Alloy 52M/152 and 82/182. The developed Weibull model can consider right-censored data (i.e., non-failed data) and quantify the improved safety (or reliability) based on the level of failure probability. The overall margin in the current fatigue design limit model (ASME design curve + NUREG/CR-6909 F_en model) is similar to that of the Weibull model with a cumulative failure probability of approximately 2.5%. The margin in the current fatigue design limit model demonstrated inconsistencies for the Ni-base alloy weld data, whereas the Weibull model showed a consistent margin. Therefore, the Weibull model can systematically mitigate the excessive safety margin.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.316-323
• /
• 2014

This paper proposes the 3D modeling and simulation technique for predicting the integrated performance of combat vehicle. To consider the practical driving and firing condition of a combat vehicle, the full vehicle model, which can define the six degrees-of-freedom of vehicle motion and various firing angles, is developed. The critical design parameters such as the stiffness and damping coefficient of suspension system are applied to construct the analysis model of vehicle. A simple ballistic model, which incorporates the empirical interior ballistic model and the point mass trajectory model, is built to estimate the firing range and the firing recoil force. To predict the integrated performance and analyze the effect of system parameters, MATLAB/SIM-ULINK model of a combat vehicle for performing the real time simulation is also developed. Several simulation tests incorporating the road bump and the firing recoil force are presented to confirm the effectiveness of the proposed vehicle model.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.4
• /
• pp.53-65
• /
• 2024

During COVID-19 the housing market in Korea experienced the soaring prices, despite the decrease in the economic growth rate. This paper aims to analyze macroeconomic determinants affecting housing prices in Korea during the pandemic and find an appropriate statistic model to forecast the changes in housing prices in Korea. First, an appropriate lag for the model using Akaike information criterion was found. After the macroeconomic factors were checked if they possess the unit root, the dependencies in the model were analyzed using vector autoregression (VAR) model. As for the prediction, the VAR model was used and, besides, compared afterwards with the long short-term memory (LSTM) model. CPI, mortgage rate, IIP at lag 1 and federal funds effective rate at lag 1 and 2 were found to be significant for housing prices. In addition, the prediction performance of the LSTM model appeared to be more accurate in comparison with the VAR model. The results of the analysis play an essential role in policymaker perception when making decisions related to managing potential housing risks arose during crises. It is essential to take into considerations macroeconomic factors besides the taxes and housing policy amendments and use an appropriate model for prices forecast.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.134-139
• /
• 2008

In this paper, we propose an analysis model for the performance of channel error probability in Stream Control Transmission Protocol (SCTP) using Markov model. In this model it is assumed that the compressor and decompressor work in Unidirectional Mode. And the average throughput of SCTP protocol is obtained by finding the throughputs of when the initial channel state is good or bad.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.38-42
• /
• 2003

In this paper, a radar scattering model for forest canopies has been developed based on an empirical rough surface scattering model and the radiative transfer theory. Leaves in the forest canopy are modeled by rectangular resistive sheets, brunches and trunks are modeled by cylinder, which sizes and orientations are randomly distributed. The scattering model has been verified with the measurement data of JPL/AirSAR system.

• Management Science and Financial Engineering
• /
• v.19 no.1
• /
• pp.37-41
• /
• 2013

This study presents an application of stochastic model for limit order book (LOB) dynamics to Korean Stock Index Futures (KOSPI 200 Futures). Since KOSPI 200 futures market is widely known as one of the most liquid markets in the world, direct application of an existing model is hardly possible. Therefore, we modified an existing model to successfully model and predict the dynamics of extremely liquid KOSPI 200 futures market.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.802-807
• /
• 2005

For linear projects, it has long been known that resource utilization is important in improving work efficiency. However, most existing scheduling techniques cannot satisfy the need for solving such issues. This paper presents an optimization model for solving linear scheduling problems involving resource assignment tasks. The proposed model adopts constraint programming (CP) as the searching algorithm for model formulation, and the proposed model is designed to optimize project total cost. Additionally, the concept of outsourcing resources is introduced here to improve project performance.