• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.24-35
• /
• 2012

In this paper, we propose a dynamic lane control scheme with a traffic predictor module and a rate controller for reconciling with commercial optical PHY modules in energy efficient optical Ethernet systems. The commercial high speed optical Ethernet system capable of 40/100Gbps employs 4 or 10 multiple optical transceivers over WDM or multiple optical links. Each of the transceivers is always turned on even if the link is idle. To save energy, we propose the dynamic lane control scheme. It allows that several links may be entirely turned off in a low traffic load and frames are handled on the remaining active links. To preserve the byte order even if the number of active links may be changed, we propose a rate controller to be sat on the reconciliation sublayer. The main role of the controller is to insert null byte streams into the xGMII of inactive lanes. For the PHY module, the null input streams corresponding to inactive lanes will be disregarded on inactive PMDs. It is very handy to implement the rate controller module with MAC in FPGA without any modification of commercial PHYs. It is very crucial to determine the number of active links based on the fluctuated traffic load, we provide a simple traffic predictor based on both the current transmission buffer size and the past one with different weighting factors for adapting to the traffic load fluctuation. Using the OMNET++ simulation framework, we provide several performance results in terms of the energy consumption.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.5
• /
• pp.385-391
• /
• 2013

Big Data is data of big size which is not processed, collected, stored, searched, analyzed by the existing database management system. The parallel genetic algorithm using the Hadoop for BigData technology is easily realized by implementing GA(Genetic Algorithm) using MapReduce in the Hadoop Distribution System. The previous study that the genetic algorithm using MapReduce is proposed suitable transforming for the GA by MapReduce. However, they did not show good performance because of frequently occurring data input and output. In this paper, we proposed the MRPGA(MapReduce Parallel Genetic Algorithm) using improvement Map and Reduce process and the parallel processing characteristic of MapReduce. The optimal solution can be found by using the topology, migration of parallel genetic algorithm and local search algorithm. The convergence speed of the proposal method is 1.5 times faster than that of the existing MapReduce SGA, and is the optimal solution can be found quickly by the number of sub-generation iteration. In addition, the MRPGA is able to improve the processing and analysis performance of Big Data technology.

• Journal of Korea Water Resources Association
• /
• v.46 no.3
• /
• pp.315-326
• /
• 2013

Despite of the importance on the maintenance of a reservoir storage, relatively few studies have addressed the stochastic reliability analysis including uncertainty on the decrease of the reservoir storage by the sedimentation. Therefore, the stochastic gamma process under the reliability framework is developed and applied to estimate the reduction of the Soyang Dam reservoir storage in this paper. Especially, in the estimation of parameters of the stochastic gamma process, the Bayesian MCMC scheme using informative prior distribution is used to incorporate a wide variety of information related with the sedimentation. The results show that the selected informative prior distribution is reasonable because the uncertainty of the posterior distribution is reduced considerably compared to that of the prior distribution. Also, the range of the expected life time of the dead storage in Soyang Dam reservoir including uncertainty is estimated from 119.3 years to 183.5 years at 5% significance level. Finally, it is suggested that the improvement of the assessment strategy in this study can provide the valuable information to the decision makers who are in charge of the maintenance of a reservoir.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2010

Construction Projects have mutual collaborative structures among various participants for common objectives. Most of all the design project which is the initial phase in the project is crucial for determining project overall quality and requires intimate and continuous relations between project participants. Thus, this study suggests Design Collaboration Management System for successful performing projects through cooperation among participants in the initial stage of projects. First, expert interviews were performed to figure out present conditions of design collaboration management and problems. The factor analysis was applied to draw owner's collaboration factors and engineer's collaboration factors. Based on those factors, this study suggests design cooperation management process which gives a framework for systematic management method. Through the process the design collaboration management system was developed which helps owner/designers/engineer's co-work. The System suggested from this study realizes systematic information management tool and through that it is expected to improve design product;'s quality, and further contribute the advancement of project.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.462-470
• /
• 2012

Implementing the generalized Hoek-Brown failure criterion in the framework of the Mohr-Coulomb criterion requires the calculation of the equivalent friction angle and cohesion. In the conventional method based on the Balmer (1952)'s theory, the tangential instantaneous friction angle and cohesion are expressed in terms of the minimum principal stress ${\sigma}_3$, which does not provide the information about the dependency of the equivalent parameters on the hydrostatic pressure and the stress path. In this study, this defect of the conventional method has been overcome by representing the equivalent parameters in terms of stress invariants. Through the example implementation of the new method, the influence of the magnitude of the hydrostatic pressure and the Lode angle on the tangential instantaneous friction angle and cohesion is investigated. It turns out that the tangential instantaneous friction angle is maximum when the stress condition is triaxial extension, while the tangential cohesion is maximum when the stress condition is triaxial compression. The dependency of the equivalent Mohr-Coulomb strength parameters on the hydrostatic pressure and the Lode angle tends to be more substantial for the favorable rockmass of larger GSI value.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.445-455
• /
• 2011

A probabilistic classification framework is presented that can combine temporal contextual information derived from an existing land-cover map in order to improve the classification accuracy of land-cover classes that can not be discriminated well when using spectral information only. The transition probability is computed by using the existing land-cover map and training data, and considered as a priori probability. By combining the a priori probability with conditional probability computed from spectral information via a Bayesian combination rule, the a posteriori probability is finally computed and then the final land-cover types are determined. The method presented in this paper can be adopted to any probabilistic classification algorithms in a simple way, compared with conventional classification methods that require heavy computational loads to incorporate the temporal contextual information. A case study for crop classification using time-series MODIS data sets is carried out to illustrate the applicability of the presented method. The classification accuracies of the land-cover classes, which showed lower classification accuracies when using only spectral information due to the low resolution MODIS data, were much improved by combining the temporal contextual information. It is expected that the presented probabilistic method would be useful both for updating the existing past land-cover maps, and for improving the classification accuracy.

• Information Systems Review
• /
• v.18 no.2
• /
• pp.107-125
• /
• 2016

With the rapid growth of the mobile application market, mobile donation applications have emerged as a new type of application that enables users to donate without actual payments. To date, limited research has been conducted to provide guidelines on how to design new types of mobile donation applications. Using cause-related marketing theory as theoretical framework, this study aims to identify the features of mobile donation applications that increase the intention of users to use such applications. To achieve this goal, we conducted two experiments. The results of an ANOVA test in the first experiment showed that indirect mobile donation applications (i.e., applications without actual payment) have a stronger positive effect on perceived effectiveness and cause involvement than direct mobile donation applications (i.e., applications with actual payment). In addition, perceived effectiveness and cause involvement yield positive effects on the intention to use mobile donation applications. The results of the second experiment showed that indirect mobile donation applications with utilitarian functions have a greater positive effect on perceived effectiveness and cause involvement than mobile donation applications with hedonic functions. These results contribute to mobile application and donation research as well as provide guidelines for practitioners on the design of mobile donation applications.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.498-509
• /
• 2001

Collaborative systems allow users, who may be far removed from each other geographically, to do collaborative work such as 3D animation, computer game, and industrial design in a single virtual space. This paper describes our experience to develop a collaborative system framework that aims at expanding the some functions of a stand-alone visual modeling tool, called 3D Studio Max, into those of the distributed collaborative working environments. The paper mainly deals with design and implementation of a 3D shared-object Plug-In with respect to the 3D Studio Max Plug-In Software Development Kit in the distributed collaborative system developed by the authors. There are two major functions of the proposed scheme; one is to write 3D object-information to the shared memory after extracting it from the 3D Studio Max, the other is to create 3D objects after retrieving them from the shared memory. Also, the proposed scheme provides a simple way of storing 3D objects that have variable size, by means of shared memory which located in between the collaborative system clients and 3D studio Max. One of the remarkable virtures of the Plug-In is to reduce a considerable amount of shared object data which in consequence can mitigate the network overhead. This can be achieved by the fact that the system is able to extract a minimum amount of 3D objects that are required to transmit. Also, using the proposed scheme, user can facilitate 3D Studio Max into distributed collaborative working environments. This, in consequence give many benefits such as saving time as well as eliminating space constraints in the course of 3D modeling when we are under industrial design process.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.547-553
• /
• 2017

This study focused on the difference of photocatalytic performance by the incorporation of Pd into the $TiO_2$ framework and suggested five different catalysts composed of $TiO_2$ and x mol% $Pd-TiO_2$ (x = 0.25, 0.5, 0.75, and 1.0). A typical sol-gel method was used to synthesize catalysts, and the phenol photodegradation performance of each catalysts was evaluated. The physicochemical and optical properties of catalysts were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy/energy dispersive spectrometer (SEM/EDS), ultraviolet/visible spectroscopy (UV/Vis), photoluminescence spectroscopy (PL), and photocurrent measurements. With the addition of Pd ions, the band gap of catalysts was shortened and the charge separation between photogenerated electrons and holes easily also occurred. As a result, the phenol photo-destruction performance over 0.75 mol% $Pd-TiO_2$ catalyst was 3 times higher than that of pure $TiO_2$. This is believed to be due to Pd ions acted as an electron capturing function during photocatalysis.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.23-30
• /
• 2001

The Financial Cost in construction industry today is tend to increasing the burden of business management on account of lowered profit due to the mege-competition and decreasing investment of construction, multi-interfacing. system in it's attribute and various unreasonable governeing enactments. It is becoming the most important aspects for the management of construction business on how to preserve the profit from the various risks. The ultimate aims of this study is to pursue the contractual equity between the parties by establishing the fundamentals of framework for the compensation of Financial Charges through the review of the precedent studies and analysis of inquiries. As a result of the study, improvable measures for any practical inequality and/or institutional defects of current public contract system in recovering the Financial Cost incurred to Contractor are delivered as below; (1) $\lceil$Working Rules for Construction Industry Accounting Standards$\rfloor$ shall be amended and supplemented so as the incurred interest to be recognized as an operative cost by live return over the collection period. (2) The long-term phase contract system of which is enforcing contractor to bear the certain losses shall be diminished and/or abolished gradually. (3) The unreasonable legislations on compensation for financial cost in contract conditions shall be improved in response to practical circumstances. (4) The use of Critical-Path Method for Time Management shall be activated together with EVMS. (5) Independent application of Contract Enactments for construction industry shall be adopted.