• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.131-139
• /
• 2018

최근 4차 혁명과 연계하여 많은 선박 분야의 연구들이 수행되고 있으며, 그 중 하나로 에너지 관리시스템 (EMS: Energy Management System)이 관심을 받고 있다. 에너지 관리시스템은 선박의 에너지를 관리하기 위한 시스템을 통칭하며, 다양한 시스템을 포함한다. 본 논문에서는 선박에서의 에너지 절감 분야를 분석하고, 기관실에서 에너지 절감이 가능한 개별 부하 제어 시스템을 포함한 선박 전력 에너지 관리 시스템을 제안한다. 제안하는 EMS는 PCS (Pump Control System), ERFCS (Engine Room Fan Control System), LCS (Load Control System), HVACS (Heating, Ventilation, Air conditioning Control System)의 개별 부하 제어 시스템을 포함한다. 1차적으로, 제안하는 EMS는 기관실의 개별적인 부하 시스템에서 에너지를 절감한다. 2차적으로는 통합 모니터링 및 제어 시스템을 통해 발전 시스템과 전력 부하 시스템을 적절히 제어하여 에너지를 절감한다.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.155-160
• /
• 1993

본 논문은 선박 기관실의 특설늑골에 대한 치수결정 방법으로써 하나의 접근방법을 서술하였다. 특설늑골의 치수결정 인자는 실적선의 데이터를 중심으로 조사 연구되었으며, 그 구성인자로는 주로 갑판간 거리, 주기 및 프로펠러 기진 주파수, 만재흘수선, 특설늑골 배치간격, 갑판수 그리고 주기마력 등이다. 이러한 주요인자를 기초로 정하중 및 동하중이 고려된 특설 늑골 치수를 결정할 수 있는 설계식을 유도하였다. 본 논문은 기관실구조의 특설늑골의 치수를 검토할 수 있는 한 방법으로써 설계단계에서 정하중 및 동하중을 고려한 합리적인 설계가 될 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.403-408
• /
• 2007

According as diesel automobile are produced, reduce noise and vibration that is occurred by characteristic of diesel engine, and need engine room layout optimization and research for light weight of parts. Balance Shaft Module is module parts for vehicles engine to improve performance and efficiency of engine and reduce noise and vibration. These days, an oil pump integrated balance shaft module and an oil sump integrated balance shaft module is on the rising for optimizing of engine room. In this study, produced prototype of oil pump integrated type balance shaft module, and achieved dynamic characteristic test about experimental modal analysis and noise/vibration of balance shaft module.

• 한국전산유체공학회지
• /
• 제9권4호
• /
• pp.13-19
• /
• 2004

Flow distribution of a mid-size vehicle in engine room was investigated numerically to analyze the flow performance of given design cases in a front body of the mid-size vehicle. The data analyzed are the mass flow rate at the upper and lower openings, in the radiator, and the degree of non-uniformity of the velocity field at the inlet of the radiator. It is presented that the shape of the front end and the presence of the undercover greatly affect the flow fields, therefore, the flow performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.954-960
• /
• 2001

Axial fans are widely used in heavy machines due to their ability to produce high cooling of engines. At the same time. the noise generated by these fans causes or serious problems. This work is concerned with the low noise technique of discrete. The prediction model. which allowed the calculation of acoustic pressure at the frequency and it's harmonics, has been developed by Farrasat and the Helmholtz-Kir. The newly developed Helmholtz-Kirchhoff BEM for thin body is used to calculate the sound field of the fan that is located in a engine room. To calculate the unsteady resultant force over blade. Time-Marching Free-Wake Method are used. The fan noise of fan sys unsymmetric engine-room is predicted. In this paper. the discussion is confined to and discrete noise of axial fan and front Part of engine room in heavy equipments.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.107-114
• /
• 2006

This paper investigates the radiating source of electro-magnetic waves in the cabin of automobile with spark ignition engine. Front seats are very close to the engine room where electro-magnetic waves are expected to be radiating. But front seat area is believed to be a blind zone, which is not affected by radiating electro-magnetic waves, because a bulk board and floor board shield the front seat area. The level and frequency spectrum of electro-magnetic waves are measured at the passenger seat and the engine room. The measured frequency range is $145{\sim}365MHz$. As a results, the level of the electro-magnetic waves of automatic transmission vehicle is greater than -82dBm. The shapes of frequency spectrum of both engine room and passenger seat are look alike. But the level of electro-magnetic waves of manual transmission vehicle is less than -82dBm and the shapes of frequency spectrum of engine room and passenger seat are different to each other. From these results, we can say that any mal-function caused by electro-magnetic waves in the automobile cabin are only possible for automatic transmission vehicle. Also, it is believed that the radiating source of electro-magnetic waves is inside the vehicle. Thus, based on the transmission line theory, this paper presumably concludes that the cables which connect all the components inside a automatic transmission vehicle must be a radiating source of electro-magnetic waves in the cabin.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1129-1136
• /
• 2021

본 논문은 선박 기관실 내의 효율적인 감시를 위한 팬-틸트-줌(PTZ) 카메라 기반의 모니터링 시스템의 설계 방법을 다룬다. 선박 기관실에는 여전히 전통적인 아날로그 계기들을 사용하는 곳이 많고, 침수나 화재 등 안전과 밀접하게 관련된 사각지대들이 다수 존재한다. 이러한 감시 개소들에 대하여 비교적 빠른 주기로 넓은 범위를 보장하는 카메라 기반 감시 시스템은 선박의 안전을 강화시킬 수 있는 효과적인 대안이 될 수 있다. 이에 본 연구에서는 기존 PTZ 카메라의 기능들을 소프트웨어적 방법으로 더욱 강화시킨 형태의 모니터링 시스템을 제안한다. 보다 구체적으로는 카메라제어 모듈, 위치등록 모듈, 순회제어 모듈, 멀티뷰 영상재구성 모듈로 구성된 모니터링 시스템의 설계 방법을 제안하고, 제안된 방법은 기관실 환경에서의 실험을 통해 그 효용성을 평가한다.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.569-574
• /
• 2011

In research vessels or naval ships, airborne noise from machineries such as diesel engine is the major source of underwater noise at low speed. In this paper, effect of engine noise on underwater noise is studied by considering two paths; sound radiation from hull plate and direct airborne noise transmission through hull plate. SEA (Statistical energy analysis) is used to predict hull plate vibration induced by engine noise, where SEA model consists of only two subsystems; engine room air space and hull plate. The pressure level in water is calculated from sound radiation by plate. Engine noise transmission through hull plate is obtained by assuming plane wave propagation in air-limp plate-water system. Two effects are combined and compared to the measurement, where speaker is used as a source in engine room and sound pressure levels in engine room and water are measured. The hydrophone is located 1 m away from the hull plate. It is found below 1000 Hz, prediction overestimates underwater sound pressure level by 5 to 12 dB.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.106-111
• /
• 2006

The steel outfitting structures installed in engine room are vibrated by an excitation of the engine and the propeller. Vibration problems such as cracks and fitting breakages are mainly induced at the near range of the resonance. The excitation frequency estimation is possible by engines and propeller specifications, but the natural frequency of a steel outfitting structure is not easily estimated due to the complication and variety of the designed shape. This paper represents natural frequency data of simple steel outfitting structures. As a vibration analysis tool, MSC/NASTRAN was used to calculate natural frequencies. Natural frequencies were compared in case of the shape and boundary condition changes of simple models, and anti-vibration models of the steel outfitting structures were presented on the basis of results.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.166-176
• /
• 1990

Experimental study was made to find the effective ways for cooling of engine room in a power car through natural ventilation, forced ventilation and wind tunnel test of 1:10 model. Through the measurements of inner temperature of engine room and pressure distribution of model surface for the various opening combinations and the fan locations, the following results are obtained. For natural ventilation, side and top opening combination is more effective than the side openings only and optimal opening combination is all side openings with top center opening. For forced ventilation with fan on the roof, the combination of all sides and top opening is more effective than the combination of side and top opening, and the optimal location of fan is top center. When the model is located in the air stream, the combination of side and top opening is more effective than the side openings only, and the optimal location of top opening is the front opening. With both air stream and forced ventilation, the optimal location of fan is the side region, and the direction of side grill installation is found to have negligible effect on the room ventilation.