• Tribology and Lubricants
• /
• v.26 no.5
• /
• pp.277-282
• /
• 2010

The purpose of this paper is to study and analysis the failure examples for parasitic current leakage produced in starting system on gasoline engine. It verified the discharge of battery by electric leakage because of internal wiring damage problem for CD auto changer installed in car. Also, it verified the no-stating phenomenon because of deposit forming by chemical reaction of battery fluid between battery post and cable fixing parts. It verified the damage for brush holder and commutator mixing by internal short phenomenon because of brush carbon a particle and engine oil that was flowed into internal of starting motor. It verified the working phenomenon of audio by a point of contact even if the driver turn to "LOCK" position the key.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.166-174
• /
• 2002

Power steering systems far automobile are becoming ever more popular because they reduce steering efforts of the drivers, especially during parking lot maneuver. In this paper, the controller of the motor driven hydraulic power steering(MDHPS) has been designed and developed. This system uses a power source of DC motor instead of engine power source for power steering drive oil pump. The developed MDHPS system is accomplished a highly sensitive power steering resulted from electronic control under variable driving condition. Furthermore, this system is more improvement than type of engine driving far fuel economy.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1996

The component analysis of wax for detecting temperature in automobile thermostat of the automotive engine and manufacture of it with distillation and solvent extraction were progressed. From the lift test results of prepared samples, it was found that the solvent extracted samples were in the proper range for use as an automobile thermostat of the automotive engine. And more accurate wax could be manufactured by high vacuum fractional distillation and acid treatment after solvent extraction from crude oil pitch.

• Journal of ILASS-Korea
• /
• v.2 no.4
• /
• pp.1-6
• /
• 1997

In the case of analyzing the combustion phenomena in a small high speed DI diesel engine, one demands the experimental results of the impinging spray on the wall as a basic characteristics. In the experiments presented here, diesel fuel oil was injected into a high pressure chamber in which compressed air at room temperature was charged. The single spray was impinged on a flat wall. The growth of the spray was photographed with transmitted light or scattered light. The effect of the spray axis angle to the wall on the impinging spray was revealed. Finally, the experimental results was presented, that is, the radius and height of the impinging spray was influenced by above mentioned variable.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.40-45
• /
• 2006

For ships of ice class, finish Maritime Administration(FMA) requires brackets on intersections between longitudinal frames and the web frames within the ice-strengthened area. The main object of this paper is to verify ultimate load carrying capacity of longitudinal frame without brackets of engine room region of 74,100 DWT Product Oil Tanker. Comparative approach between proposed structures from builder (the proposed structure) and structures satisfying the Finnish-Swedish ice class rules (the rule structure) is used for the analysis.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1995.06a
• /
• pp.18-24
• /
• 1995

본 연구에서는 두가지 엔진에 사용된 엔진오일의 성상변화를 측정하였다. 따라서 금속 마모입자 분석, 동점도 측정과 TAN 및 TBN 분석을 통한 물리적 성상과 화학적 성질 분석 그리고 적외선 분광 분석과 정량 폐로그라피 분석 등을 통하여 Table 1에 나타난 기준에 의해 오일의 수명을 판정하였다. 아울러 RPD를 이용하여 마모입자의 형상 등을 분석하고 엔진에서 발생하는 마모기구를 살펴보았다. 물론 본 연구는 주위 환경이 양호한 실험실에서 엔진 동력계에 의한 실험에 의존하였으므로 실제 주행실험 결과보다는 오일의 수명이 더 길게 나타날 것으로 예측된다. 더욱이 농경지에서 주로 사용되는 경운기의 경우는 오일이 먼지나 모래, 진흙 등에 의해 오손되기 쉬우므로 실제 오일의 수명은 훨씬 더 짧을 것으로 생각되므로 실차 주행실험 결과와의 비료는 앞으로 더 연구할 분야로 생각된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.112-122
• /
• 1995

As an alternative fuel producing less exhaust emissions, natural gas is of interest for use both in SI and CI engines. The potential of natural gas fuelled dual-fuel engine is considered high enough. However, much effort has to be made so that gaseous fuel is used efficiently with simultaneous minimum use of pilot oil. Hence, a simplified three-dimensional model, using a finite volume method in cylindrical coordinates, has been developed to facilitate an understanding of the dual-fuel combustion phenomena and to predict the complex interactions between the pilot distillate and natural gas. The computer model was calibrated by comparing it with the experimental results obtained from diesel engine like combustion bomb tests. In the pre-mixed natural gas combustion, the fuel burning was highly reliant on the injection condition and subsequent burning nature of the pilot distillate.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.29-31
• /
• 2013

In this study, the characteristics of particulate matters (PM) from diesel and biodiesel fuel combustion was experimentally investigated. The experiment was performed in a single cylinder common-rail compression ignition engine. The fuels were injected at -5 CAD (Crank angle degree) ATDC (After top dead center) with 80 MPa injection pressure. Size distribution of PM was measured by scanning mobility particle sizer (SMPS) and morphology of PM was studied by transmission electron microscopy (TEM). PM from biodiesel shows lower emission level and smaller primary particles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.195-201
• /
• 1998

This study aims at the optimal design of rotors and the development of screw type Supercharger of CNG-fueled engine for commercial vehicle. Based on the new rotor profile, an advanced oil free type Supercharger has been developed, which can achieve higher adiabatic efficiency and lower manufacturing cost. The performance test of screw type Supercharger has achieved high volumetric efficiency and the durability on the bench of performance test has also been established in the compact body.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.44-51
• /
• 2003

By blending of various low boiling point oxygenated agents to lower grade fuels, significant improvements were simultaneously obtained in smoke, CO, PM, SOF and BSEC. Especially, our trends were remarkably obtained by retarding injection timing, by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than non-oxygenated agents. Also, it was revealed that when 20vo1.% DMM added to high viscosity fuels and injection timing was retarded, NOx-smoke trade off relationship was much better than that of ordinary diesel fuel. Thus, lower grade fuels with high viscosity could be expected to be used efficiently and cleanly in diesel operation by blending low boiling point oxygenates.