• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.1049-1059
• /
• 2017

After patrol corvett Cheonan was hit and sank on duty, the Republic of Korea Navy has tried to install hybrid propulsion system on naval ship to reduce vibration and noise problems during navigation. The hybrid propulsion system has advantage that propulsion motor can be propelled in low speed operation of the vessel. This can be a better quietness than a mechanical propulsion system which consists of a conventional internal combustion engines. And more economical operation is possible by using a propulsion motor in a low speed operation where a fuel efficiency of the internal combustion engine is poor. In this paper, we set up virtual ship on the basis of a combat support ship in the Republic of Korea Navy, economically compared and analyzed fuel consumption between conventional and hybrid propulsion system. As a result, it was confirmed that the fuel efficiency of hybrid propulsion system which use electric motor had been relatively improved.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.134-145
• /
• 1996

Since the skid-steer loader is able to work for excavating, lifting and transporting load even at the narrow space, they are widely used in the regular farm and the livestock farm. The skid-steer loader normally adopts the hydrostatic transmission because the power to move the machine backward and forward should be delivered independently on both sides of wheels. Contrast to the mechanical system such as chain and belt transmissions, however, the hydrostatic transmission is less efficient in the use of energy and more difficult in the maintenance. This study was intended to investigate the feasibility of using triangular-type belt clutch and V-belt transmission for the newly developed skid-steer loader in order to overcome the problems stated in the hydrostatic transmission. In the developed triangular-type belt clutch, the centers of driving, driven and idler sheaves are arranged in the triangular shape in a plane, and V-belts were loaded loosely on three sheaves. The power is transmitted by pressing the idler connected to a lever on the loosened V-belt. Contrast to the normal belt clutch using two sheaves, the newly developed belt clutch has the characteristics of small contact-angle of the driving sheave at no bucket load and increasing contact-angle at the time of power transmission. The results of research can be summarized as follows: 1) The developed triangular-type belt clutch adopted a spring-loaded slackside idler which could transmit more power than a fixed idler could by sacrificing the belt life. The life of V-belt used in the power transmission reached at 500 hours(6 months) when the engine power of 11.8 ㎾ was transmitted. Also, it was feasible to develop the large industrial skid-loader with the V-belt transmission by using the proper set of sheaves. 2) The developed skid-steer loader changed the rotating radius and speed with bucket loads as the conventional skid steer loader did. The rotating speed was 47 deg/s at the maximum bucket load of 2.74 kN when the minimum rotating radius was 1.5m. 3) The power required in turning at the bucket load of 2.74 kN was 4 ㎾ and the slippage of V-belt was less than 1%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.663-671
• /
• 2011

Although a scooter is a convenient transportation means for a short distance traveling with a light package in the congested urban center, it might be one of the significant sources of air pollutants to which many people can easily be exposed during its passing-by. In this paper, we measured concentrations of gases and particles emitted from a scooter at roadside with no other traffic. To understand the characteristics of scooter emissions with respect to driving speed (idling, 30 km/h) at the roadside, total particle number concentration, particle size distribution, average surface area of particles deposited in the alveolar region, and concentrations of black carbon, CO, and $NO_x$ were measured. The concentrations of the particle number, surface area of deposited particles, CO, and $NO_x$ were highly fluctuated in the scooter's idling condition. The trends of particle number concentration, CO, and $NO_x$ generation were similar to one another. When the scooter started to move, all of $NO_x$, CO and particle number concentrations increased and after it passed by at the speed of 30 km/h, the concentration peaks of the particles and gases appeared at the same time. Unimodal size distribution with ~70 and ~93 nm mode diameters was observed for the idling and cruising condition, respectively. From this work, we found that emission from a passing vehicle could be characterized using a roadside monitoring technique.

• The Korean Journal of Applied Statistics
• /
• v.30 no.5
• /
• pp.633-645
• /
• 2017

This study proposes a statistical procedure for analyzing container ship operation data that can help determine fuel consumption patterns. We first investigate the features that affect fuel consumption and develop the prediction model to find current fuel consumption. The ship data can be divided into two-type data. One set of operation data includes sea route, voyage information, longitudinal water speed, longitudinal ground speed, and wind, the other includes machinery data such as engine power, rpm, fuel consumption, temperature, and pressure. In this study, we separate the effects of external force on ships according to Beaufort Scale and apply a partial least squares regression to develop a prediction model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.74-80
• /
• 2009

The objective of this paper was to investigate the slip rate and the slip frequency number of damper clutch of torque converter in 2.4L passenger vehicle with 5-speed A/T and analyze the effect of slip control and control strategy on driving characteristics and the fuel economy. The newly developed torque converter with the more durable wet friction material and the slip-controlled damper clutch system, the DCC system, was installed, which was easily compatible and amendable of the lock-up clutch of the base system. The vehicle has been tested on the fuel economy modes such as FTP-75, HWFET and NEDC (ECE15+EUDC) driving cycle at chassis dynamometer. The DCC mode (II), of which the control strategy had both the lock-up and the slip-controlled clutch, and the DCC mode (I) with full slip-controlled clutch were compared with the base system with only the lock-up clutch. As the research result, comparison to base system, the fuel consumption of the vehicle with the DCC control (II) was effectively improved by 6.6% and 7.7% on FTP-75 and NEDC mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.939-946
• /
• 2009

In this paper, we propose a new network ASIP(Application Specific Instruction-set Processor) which was designed for simulation models by a machine descriptions language LISA(Language for Instruction Set Architecture). This network ASIP is aimed for an exclusive engine undertaking packet processing in a router. To achieve the purpose, we added a new necessary instruction set for processing a general ASIP based on MIPS(Microprocessor without Interlock Pipeline Stages) architecture in high speed. The new instructions can be divided into two groups: a classification instruction group and a modification instruction group, and each group is to be processed by its own functional unit in an execution stage. The functional unit was optimized for area and speed through Verilog HDL, and the result after synthesis was compared with the area and operation delay time. Moreownr, it was allocated to the Macro function ana low-level standardized programming language C using CKF(Compiler Known Function). Consequently, we verified performance improvement achieved by analysis and comparison of execution cycles of application programs.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.5
• /
• pp.241-248
• /
• 1999

Recently, many linear motion generators and motors are rapidly finding applications that ranges from short stroke linear motion vibrators, such as dynamic cone type loudspeakers to stirling engine driven linear reciprocating alternators, compressors, textile machines etc. The stroke-length may go up to 2m, and the maximum speed is in the range of 5 to 10m/s with oscillating frequency as high as 15 kHz. Therefore, the linear oscillating actuators(LOAs) may be considered as variable speed drivers of precise controller with stoke-length and reversal periods during the reciprocating motion. In this paper, the design, fabrication, experiments, and extraction of control parameters of a moving coil type LOA for driving of linear reciprocating motion control systems, are treated. The actuator consists of the NdFeB permanent magnets with high specific energy as the stator produced magnetic field, a coil-wrapped nonmagnetic hollow rectangular bobbin structure, and an iron core as a pathway for magnetic flux. Actually, the design is accomplished by using FEM analysis for the basic configuration of a magnetic circuit, and characteristic equations for coil design. In order to apply as the drivers of a linear motion reciprocating control system, the control parameters and circuit parameters, such as input voltage-stoke, exciting frequency-stoke, coil inductance and so on, are extracted from the analysis and experiments on concerning a fabricating LOA.

• Land and Housing Review
• /
• v.8 no.2
• /
• pp.33-53
• /
• 2017

The UK Government's approach to how to deliver regeneration in its towns and cities has changed considerably in recent years. Traditionally, urban regeneration policy focused on reversing physical, economic and social decline in an area where market forces would not do this without intervention. Since 2010 urban regeneration has become a vital part of the Government's approach to increasing local growth and competitiveness and building a strong and balanced economy. The current emphasis is on a place-based approach to regeneration that builds on the particular strengths of different places to drive growth and addresses the factors that hold them back. This paper outlines the key features of current UK urban regeneration policy and how interventions to support regeneration and growth are being pursued at different spatial scales to ensure all parts of the country benefit. They include pan regional initiatives like the Northern Powerhouse and Midlands Way, to groups of local authorities operating at a sub regional level (combined authorities/city regions), Local Enterprise Partnerships, and a variety of smaller scale programmes delivering regeneration in areas of economic and social decline. The paper explains some of the policy instruments and funding programmes available to support regeneration, and provides case studies of some major urban regeneration projects that illustrate the new approach including housing and infrastructure improvements like the planned High Speed Rail 2 line. These are supporting regeneration through the creation of strategic partnerships involving government, places and investors. The paper concludes with some lessons from past and future regeneration schemes to improve their effectiveness and impact on places and enhance local growth potential.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.942-944
• /
• 2017

High-speed vehicles are subjected to complex loads, such as acoustic pressure from the engine at launch and aerodynamic heating and aerodynamic pressure during flight. A thermal protection system panel is required to protect internal systems such as the fuel tank of the vehicle from the external environment. This study defines analytical models for heat transfer and thermal structure characteristics of the thermal protection system panel. Furthermore, the study performed parameters analysis to achieve the thermal structural integrity and to make it lighter.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.111-117
• /
• 2011

This paper suggests the passenger model considered evacuation behavioral characteristics on the passenger ship fire using a rules-based agent technique. The existing evacuation simulation system was modeled only passenger speed. The speed-based model considered passenger's physical characteristics, so it couldn't consider evacuation behavioral characteristics. For solving this problem, we modeled the passenger model using a rule-based agent applied evacuation behavioral characteristics. The rule-based agent consists of knowledge base and inference engine. In knowledge base, we represented evacuation behavioral characteristics, and chose the examples of the evacuation behavioral characteristics to show various patterns of behavior. And we simulated in the IMO MSC/Circ.1238 example 8 and we proved the simulation results could represent variety patterns of human behavior.