• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.42-49
• /
• 1993

Recently, because the lubricating oil showed a tendency to be emulsified and oxidized by high speed, high output and the extension of maintenance & conservation of marine engine, the cavitation erosion-corrosion at such an environment became a big problem on effective performance of engine. Therefore, there was a need to study the behavior and protection of erosion-corrosion damage, and then applied inhibitor to a protective method of cavitation erosion- corrosion damage. At this time, test environments were marine lubricating oil & various emulsified oil that mixed distilled water and sea water etc., and also used 20KHz, 24.mu.m piezoelectric vibrator as an experimental apparatus of cavitation erosion. With this apparatus, we investigated an influence of the emulsified oil on characteristics of erosion-corrosion and protection for erosion-corrosion by inhibitor at slide bearing metals.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권3호
• /
• pp.143-150
• /
• 2009

선박의 주기관이나 발전기관 등 디젤기관에서 사용하는 연료유는 원유를 정제해서 사용하고 있다. 석유화학공업에서 원유로부터 양질의 고급 휘발유를 많이 생산하기 위하여 촉매를 사용하는 유동접촉분해(FCC) 방법을 채택하여 원유를 분리하고 있다. 유동접촉분해 시 촉매의 주성분은 Si와 Al이며, 그 외에 Fe, Zn, Ti 등의 기본금속과 알칼리 금속 및 Ce, Nd, Ni, V 등의 희유금속이 함유되어 있다. 만일 선박에 사용되는 연료유에 이러한 성분의 촉매가 많이 혼입되어 Al, Si, Ni, V이나 Fe 등의 성분이 과다하게 되면 기관 부속품 마모가 아주 심하게 되고, 기관전체를 사용하지 못하게 되어 대형 해양 선박사고가 발생 할 수 있다. 다시 말해, 이런 성분이 많이 함유된 연료유를 기관에 사용하는 경우 연료펌프, 연료분사밸브, 실린더라이너, 피스톤링의 마모가 심하게 발생하게 된다. 따라서 이러한 사고를 예방하기 위하여 사고 발생현황에 대한 정확한 원인을 규명하고 밝히는 것이 중요하다. 아울러 그 사고의 원인이 자연적인 마모, 경년변화인가 또는 외적인 요인에 의한 사고인가에 따라 보험 보상 대상여부가 판명될 수 있어, 연료유로 인한 사고 원인규명은 아주 중요한 업무이다. 본 논문에서는 연료유 관련 사고가 발생한 선박을 대상으로 사고유형, 사고원인 및 예방법에 대한 검토를 하고 향후 선박의 디젤엔진에서 저질연료유 사용에 따른 문제점을 개선하도록 제시하고자 한다.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.113-119
• /
• 2014

Due to the development of the petroleum refining technology and continuously increased demand from markets, a quantity of gasoline and diesel oil produced from a restricted quantity of crude oil has been increasing, and residual fuel to be used at marine diesel engines has been gradually becoming low quality. As a result, it was recently reported that trouble oils which cause abnormal combustion such as knocking with extreme noise and misfire from internal combustion engines were increasing throughout the world. In this study, an author investigated ignitability and combustion quality by using combustion analyzer with constant volume(FCA, Fuel Combustion Analyzer) and middle speed diesel engine about MDO(Marine Diesel Oil), HFO(Heavy Fuel Oil), LCO(Light Cycle Oil) and Blend-HFO which was blended LCO of 1000 liters with HFO of 600 liters. Moreover, for betterment of ignitability and combustion quality of injected fuels, multi-injection experiment was carried out in the diesel engine using Blend-HFO. According to the results of FCA analysis, ignitability and combustion quality was bad in the order of MDO

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.67-78
• /
• 1999

Recently, a greater part of all ship use a coarse heavy fuel oil(HFO) over specific gravity(S.G) 1.00/15$^{\circ}C$ and viscosity 3,500 cSt/4$0^{\circ}C$ as the fuel oil of marine boiler or internal combustion engine from the viewpoint of economical ship' operation. The greater plan to improve a combustion methods of heavy fuel oil, such as atomization, homogeneity and emulsification, were contrived and carried out newly, and then applied 20kHz ultrasonic homogenizer to one of test methods. Also, adopted the marine oils(fuel oil and lubricating oil etc.) and sludge oil as test solutions, and its matrix structures were examined with photographs, Especially, it is important at control system of oil pollution, for the sludge oil emulsified, to be recycled as fuel oil of boiler according to 20kHz Ultrasonic homozenizer, and then fuel saving is attained effectively by making sludge oil to be burnt.

• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.233-239
• /
• 2012

The engine of a large ship operates under wet conditions using a fuel such as bunker C oil, which includes sulfur and many impurities. A cylinder liner made of cast iron is very susceptible to damage such as scuffing on the surface. This scuffing can reliably be attributed to the destruction of the oil film and the corrosion wear caused by water and sulfur included in the fuel, along with abrasion impurities and poor lubricants. In this study, a reciprocating friction and wear test was carried out with a cast iron specimen, which was used to simulate an engine cylinder in a corrosive environment. Base-oil and stirred oil containing distilled water, NaCl solution, and dilute sulfuric acid were used as lubricants. The friction surface was analyzed using a microscope and EDAX, and the friction coefficient was measured using a load-cell under each experimental condition. We then attempted to investigate the damage to the cylinder liner using the results.

• 해양환경안전학회지
• /
• 제21권1호
• /
• pp.103-108
• /
• 2015

최근 지구 온난화는 세계 경제발전으로 화석연료 사용이 주범으로 인식하고 있다. 이러한 화석연료를 감소하기 위한 연구는 여러 대체에너지 산업으로 발전하고 있으며, 그 중 우리나라에서 생산할 수 있는 연료는 바이오연료이다. 바이오연료는 화석연료에 의해서 발생하는 환경오염 문제를 줄이면서 경제적인 이익을 주는 지속 가능한 연료이다. 그래서 바이오연료를 친환경에너지로 전환시키는 재생에너지 등에 많은 연구가 진행되고 있다. 따라서 본 실험은 어선에서 사용했던 기관을 다시 리모델링하여 실험장치를 직접 제작 설치하였고, 여러 바이오연료를 사용하여 선박의 경제적이고 친환경적인 운항에 도움을 주고자 연구하였다. 유채유, 대두유, 폐유채유의 배기배출 물특성에 미치는 영향을 종합적으로 분석한 결과는 연료의 물리적, 화학적 성분이 비슷하여 선박용 엔진에 사용이 가능하고, 연료소비율과 NOx는 약간 증가하였으나, 매연은 많이 감소하는 경향이 확인되었다.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.309-314
• /
• 2015

A sunken ship often involves an oil spill. This paper was carried out to minimize environmental and cost damages stemming from oil spil of sunken shipl. Through the analysis of both the standards of the oil tank system and installation, we have identified potential oil spill sites and proposed a remedy of prevention. The result of study, the air pipes of the oil tank are a vulnerable point for oil spill. Also, the remote control devices of emergency shut-off valve have poor accessibility at abandon ship, making it difficult to shut off the emergency shut-off valve. Thus, we propose the addition of a remote quick closing valve in the air pipe and the building of a central control system.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.240-245
• /
• 2016

본 연구에서는 해상용 경유의 희석량에 따른 선박용 윤활유의 점도 및 전단응력의 변화 등 유변학적 거동에 대한 연구를 하였다. 연료희석에 의한 윤활유의 점도감소는 피스톤링 및 라이너의 마모로 인한 엔진내구성을 저하키는 중요한 요소이다. 연구에 사용된 윤활유는 고유황 경유(황함유량 0.05 %)를 3 %, 6 %, 10 %, 15 %, 20 %로 희석하여 magnetic stirrer를 이용, 혼합하여 제조하였다. 측정온도는 $-10^{\circ}C{\sim}80^{\circ}C$ 범위로 설정하고, 점도 및 전단응력 변화는 회전점도계인 Brookfield Viscometer를 이용하여 측정하였다. 윤활유에 해상용 경유의 희석량이 증가할수록 점도 및 전단응력이 감소하며, 이것은 상대적으로 낮은 점도의 해상용 경유가 윤활유에 희석됨에 따라 윤활유의 점도 및 전단응력이 낮아지기 때문이다. 특히, 저온($0{\sim}-10^{\circ}C$)에서는 점도 및 전단응력이 급격이 낮아지다가, $40^{\circ}C$ 이상에서는 점도 및 전단응력 감소가 해상용 경유 희석량의 영향을 거의 받지 않는다. 온도가 높아짐에 따라, 윤활유의 점도 및 전단응력 감소는 윤활유의 뉴턴유체 거동을 보이는 것을 확인했다. 경유의 혼입에 의한 점도감소로 선박의 엔진마모를 촉진할 수 있으므로 엔진의 내구성 향상을 위해 윤활유의 주기적인 관리가 필요하다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 Proceeding of CIN-KIN Joint Symposium 2000 on M.E.T. Under STCW 78/95 and SINO-KOREA MARITIME CONTACT IN MID-CENTURIES
• /
• pp.83-91
• /
• 2000

This paper illustrates a new idea methods and results of WPD oil applied to marine diesel engines. in recent years, we must make an effort to develop an advanced technique for recycling of waste plastics in order to utilize scrapped plastics as fuel source for diesel engine. It is very important and necessary for us to cope with the increasing calorific value and the growing need of environment protection. The experiment fuel oil was obtained by mixing of diesel oil, WPD and water.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.818-823
• /
• 2001

Because the exhaust emissions from automobiles are increased, our environment is faced with very serious problems related to the air pollution in these days. In particular, the exhaust emissions of diesel engine are recognized main cause which influenced environment strong. Lots of researcher have been attempted to develop various alternative fuel on purpose to reduce these harmful emissions. In this study, the potential possibility of esterfied rice bran oil which is a kind of biodiesel fuel was investigated as an alternative fuel for diesel engine. And, we tried to analysis not only total hydrocarbon but hydrocarbon components from $C_1$ to $C_6$ in exhaust gas using gas chromatography to seek the reason for remarkable reduction of exhaust emission. Individual hydrocarbon$(C_1\simC_6)$ as well as total hydrocarbon of biodiesel fuel is reduced remarkably than that of diesel fuel in this experiment.