• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.219-226
• /
• 2012

In wireless sensor networks (WSNs), location-based multicast routing (LMR) technique can increase the network life time and the channel capacity by reducing the number of duplicated data transmissions and control messages. However, previous LMR techniques can suffer from significant performance degradation due to concrete walls or other interfering objects deployed in the real environment, since they transmit the packets by using only the locations of the sensor nodes. To solve this problem, we propose an interference-aware location based multicast algorithm for WSNs. In the proposed algorithm, each node adjusts the energy cost for each link adaptively considering the interference effect and uses it for multicast decision in order to minimize the interference impact. Experimental results show that the proposed algorithm improves the delivery and energy performance when the network is affected by interference.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.495-501
• /
• 2014

Users of passenger ships and cruise ships are rapidly increasing year by year, and the needs of the floating architecture are newly come out. But the studies about the passengers' safety and the countermeasures against incidents on board the ships are rare, although the ships' incidents are occurred averagely 15 cases per year during last 10 years. For the purposes of the analysis of the safety consciousness and gathering the some of input data for evacuation simulation for Korean passengers on board ships, this study performed surveys targeting ordinary 394 passengers who are not specially trained and/or accustomed with onboard living conditions. The results are the followings. The reliability on ships' safety is surveyed as 32.3%. Only 14.6% of respondents are aware that there were safety education on board ship during sailing. And 42.2% and 40.9% of respondents answered that they saw the map of emergency routes and knew where the life boats are, respectively. And 73.3% select crews' direct or in-direct(like announcement by indoor broadcasting system) guidances as the most effective evacuation method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.752-759
• /
• 2009

Cooperative diversity is an effective technique to combat multi-path fading. When this technique is applied to energy-constrained wireless sensor networks, it is a key issue to design appropriate relay selection and power allocation strategies. In this paper, we proposed a new multi-relay selection and power allocation algorithm to maximize network lifetime. The algorithm are composed of two relay selection stages, where the channel condition and residual power of each node were considered in multi-relay selection and the power is fairly allocated proportional to the residual power, satisfies the required SNR at destination and minimizes the total transmit power. In this paper, proposed algorithm is based on AF (amplify and forward) model. We evaluated the proposed algorithm by using extensive simulation and simulation results show that proposed algorithm obtains much longer network lifetime than the conventional algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1405-1411
• /
• 2022

Power management is still an important issue in embedded environments as hardware advances like high-performance processors. Power management methods such as DVFS control CPU frequencies in an adaptive manner for efficient power management in polling-based I/O programs such as network communication. This paper presents the problems of the existing power management method and proposes a new power management method. Through this, it is possible to reduce electric consumption by increasing the polling cycle in situations where the frequency of data reception is low, and on the contrary, in situations where data reception is frequent, it can operate at the maximum frequency without performance degradation. After implementing this as a code layer on the embedded board and observing it through Atmel's Power Debugger, the proposed method showed a performance improvement of up to 30% in energy consumption compared to the existing power management method.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.407-420
• /
• 2014

A survey was carried out regarding university students' recognition of high-caffeine energy drinks in an effort to identify and improve problems as well as provide basic data. Most of the subjects had previous experience of energy drink consumption. Studies showed that most students consumed energy drinks when studying. Regarding frequency of energy drink consumption, most students' responded "1~6 times a year"; female students showed lower frequency of energy drink consumption than male students. Both male and female students used convenience stores to purchase energy drinks. In most cases, students became aware of energy drinks through advertisements on TV, radio, newspapers, and magazines. The most important factor affecting their energy drink purchase and consumption status was taste. The most frequent adverse effect they experienced after drinking an energy drink was unusual heart-pounding, whereas the biggest problem caused by energy drink consumption was addiction. This study indicates that students should have a better understanding of the problems associated with excessive and prolonged high-caffeine intake. In addition, instructions for proper purchasing and consumption of high-caffeine energy drinks should be provided as well as education and campaigns concerning symptoms caused by high-caffeine energy drink consumption so that students may refrain from excessive consumption. Further, civil organizations and the government need to devise effective measures for proper regulation of high-caffeine energy drink consumption.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.493-504
• /
• 2007

With the advance and proliferation of computer and wireless network technology, it is common to access to network through the wireless network using mobile device. The ratio of using the streaming media out of many applications through the network is increasing not only in the wired network but also in the wireless network. The streaming media is much bigger than other contents and requires more network bandwidth to communicate and more computing resources to process. However the mobile devices have relatively poor computing resource and low network bandwidth. If the streaming media service is provided for mobile devices without any consideration about the network bandwidth and computing power, it is difficult for the client to get the service of high quality. Since especially mobile devices are supported with very limited energy capacity from the battery, the streaming media service should be adjusted to the varying energy state of mobile devices to ensure the complete playback of streaming media. In this paper, we propose a new method to guarantee the complete playback time of the streaming media for the mobile clients by dynamically controlling transmitted frame rate to the client according to the estimated available time of mobile device using battery model reflecting the characteristic of the battery. Since the proposed method controls the number of frames transmitting to the client according to the energy state of the mobile device, the complete playback time is guaranteed to mobile clients.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.297-302
• /
• 2015

High-energy medical linear accelerator on the dose to the thyroid cancer during radiotherapy were evaluated using optical stimulation luminescence dosimeters(OSLD) using. Scattered's influence in the case of 3D-CRT 25.4 mSv, 28.8 mSv, 31.3 mSv, 26.5 mSv, 27.4 mSv 5 times with an average 27.9 mSv, in the IMRT 46.8 mSv, 43.2 mSv, 42.3 mSv, 41.5 mSv, 44.1 mSv to five times the average of 43.6 was the result of mSv. In the case of light neutron dosimetry results 3D-CRT 3 mSv, 3 mSv, 3.4 mSv, 3.5 mSv, 3.1 mSv to five times the average 3.2 mSv, in the IMRT 5.1 mSv, 4.8 mSv, 4.2 mSv, 4.8 mSv, 4.9 mSv, to five times the average of 4.7 was the result of mSv. Both parties and the light scattered neutrons were significantly appreciated compared to IMRT 3D-CRT. Treatment of cancer using radiation workers, as in this study, and that a significant amount of scattered rays in the adjacent normal tissues during radiation therapy using energy assessment to influence by fully aware of this information is necessary for the exposure reduction efforts the feed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.585-593
• /
• 2010

Geographic routing has been considered as an efficient, simple, and scalable routing protocol for wireless sensor networks since it exploits pure local location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of sinks. Most existing geographic routing protocols merely assume that source nodes are aware of the locations of sinks. How can source nodes get the locations of sinks was not addressed in detail. In this paper, we propose a sink location service via circle path for geographic routing in wireless sensor networks. In this scheme, a sink sends a Sink Location Announcement (SLA) message along a circle path, and a source node sends a Sink Location Query (SLQ) message along a straight path that certainly passes through the circle path. By this way we can guarantee the SLQ path and SLA path have at least one crossing point. The node located on the crossing point of the two paths informs the source node the sink location. This procedure can correctly work in any irregular profile sensor networks such as network that has holes or irregular shape by some rules. Simulation results show that our protocol is superior to other protocols in terms of energy consumption and control overhead.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.43-61
• /
• 2004

Purpose : For qualify improvement in radiotherapy, it is important to set up and evaluate equipment (linac) accurately. In addition, technicians are needed to be fully aware of the equipment's detailed quality and its manual. Therefore, the result of ATP is evaluated and introduced, in order that the technicians are skilled by participating in quality assurance (QA) and understanding the quality of the equipment before clinical use. Method and Material : QA for LINAC 21EX (Varian, US) was done with suppliers its procedure was divided into radiation survey, mechanical test, radiation isocenter test, bean performance, dosimetry, and enhanced dynamic wedge and using X-omat film (Kodak), multidata, densitometer, and electrometer. QA of MLC (Millennium, 120 leaf) attached to LINAC and EPID (Portal vision) were done separately. Result : The leakage dose by survey meter was below the tolerance. In mechanical test, collimater, gantry, and couch rotation were less than 1mm, and the angles were ${\pm}0.1^{\circ}$ for digital and ${\pm}0.5^{\circ}$ for mechanical. The alignment test of the light field and crosshair were evaluated less than 1mm. The (a)symmetrical jaw field was less than ${\pm}0.5mm$. The radiation isocenter test using X-mat film was less than 1mm. The consistency of light field and radiation field was less than ${\pm}0.1mm$. PDD for photon energy was less than ${\pm}1\%$ and for electron energy of $90\%,\;80\%,\;50\%,\;and\;30\%$ were evaluated within the tolerance. Flatness for photon and electron energy was evaluated $2.3\%$ (tolerance $3\%$) and $3\%$ (tolerance $4.5\%$), respectively, and symmetry was $0.45\%$ (tolerance $2\%$) and $0.3\%$ (tolerance $2\%$), respectively. Dosimetry test for short term, MU setting, rep rate, and dose rate accuracy of photon and electron energy was within the tolerance depending on energy, MU, and gantry angle. Conclusion : Accuracy and safety for clinical use of Clinac 21EX was verified through customer acceptance procedure and the quality of the equipment was found out. These can reduce the difficulties in using the equipment. Furthermore, it is useful for clinically treatment of patients by technicians' active participations.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2009

The optical fiber cable acting as a sensor was embedded in the underground research tunnel and portal area in order to monitor their stability and the spatial temperature variation. This system includes two types of sensing function to monitor the distributed strain and temperature along the line, where sensor cable is installed, not a point sensing. According to the results of one year monitoring around the KURT, there is no significant displacement or movement at the tunnel wall and portal slope. However, it would be able to aware of some phenomena as an advance notice at the tunnel wall which indicates the fracturing in rockmass and shotcrete fragmentation before rock falls accidently as well as movement of earth slope. The measurement resolution for rock mass displacement is 1 mm per 1 m and it covers 30 km length with every 1m interval in minimum. In temperature, the cable measures the range of $-160{\sim}600^{\circ}C$ with $0.01^{\circ}C$ resolution according to the cable types. This means that it would be applicable to monitoring system for the safe operation of various kinds of facilities having static and/or dynamic characteristics, such as chemical plant, pipeline, rail, huge building, long and slim structures, bridge, subway and marine vessel. etc.