• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1748-1758
• /
• 2012

Two experiments were conducted to evaluate the effects of chemical composition of wheat shorts and red dog on energy and amino acid digestibility in growing pigs and to establish prediction models to estimate their digestible (DE) and metabolizable (ME) energy content and as well as their standardized ileal digestible (SID) amino acid content. For Exp. 1, sixteen diets were fed to thirty-two growing pigs according to a completely randomized design during three successive periods. The basal diet was based on corn and soybean meal while the other fifteen diets contained 28.8% wheat shorts (N = 7) or red dog (N = 8), added at the expense of corn and soybean meal. Over the three periods, each diet was fed to six pigs with each diet being fed to two pigs during each period. The apparent total tract digestibility (ATTD) of energy in wheat shorts and red dog averaged 75.1 and 87.9%. The DE values of wheat shorts and red dog averaged 13.8 MJ/kg (range 13.1 to 15.0 MJ/kg) and 15.1 MJ/kg (range 13.3 to 16.6 MJ/kg) of dry matter, respectively. For Exp. 2, twelve growing pigs were allotted to two $6{\times}6$ Latin Square Designs with six periods. Ten of the diets were formulated based on 60% wheat shorts or red dog and the remaining two diets were nitrogen-free diets based on cornstarch and sucrose. Chromic oxide (0.3%) was used as an indigestible marker in all diets. There were no differences (p>0.05) in SID values for the amino acids in wheat shorts and red dog except for lysine and methionine. Apparent ileal digestibility (AID) and SID values for lysine in different sources of wheat shorts or red dog, which averaged 78.1 and 87.8%, showed more variation than either methionine or tryptophan. A stepwise regression was performed to establish DE, ME and amino acid digestibility prediction models. Data indicated that fiber content and amino acid concentrations were good indicators to predict energy values and amino acid digestibility, respectively. The present study confirms the large variation in the energy content and amino acid digestibility in wheat shorts and red dog, and describes the factors that influence this variation and presents equations based on chemical composition that could probably be used to predict the DE and ME values as well as the amino acid digestibility of wheat shorts and red dog.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.89-94
• /
• 2008

We synthesized and investigated $(La_{0.75}Sr_{0.25})_{1-x}FeO_{3-\delta}$ perovskite oxides having different stoichiomety (x = 0, 0.02, 0.04, 0.06, 0.08) as cathode materials. SEM images and XRD patterns reveal that the synthesized powder has uniform size distribution and high degree of crystallinity. The electrochemical performances of the synthesized powders were investigated by AC impedance spectroscopy. Both the electric conductivity and the electrochemical performance showed the highest properties at the stoichiometry x = 0.02. Finally, we concluded that the variation of A-site deficiency results in the variation of the amount of oxygen vacancy and micro structure, which leads to the variation of electric conductivity and polarization resistance.

• Smart Structures and Systems
• /
• v.3 no.1
• /
• pp.1-22
• /
• 2007

The energy efficiency of a self-powered wireless sensing system for pressure monitoring in injection molding is analyzed using Bond graph models. The sensing system, located within the mold cavity, consists of an energy converter, an energy modulator, and a ultrasonic signal transmitter. Pressure variation in the mold cavity is extracted by the energy converter and transmitted through the mold steel to a signal receiver located outside of the mold, in the form of ultrasound pulse trains. Through Bond graph models, the energy efficiency of the sensing system is characterized as a function of the configuration of a piezoceramic stack within the energy converter, the pulsing cycle of the energy modulator, and the thicknesses of the various layers that make up the ultrasonic signal transmitter. The obtained energy models are subsequently utilized to identify the minimum level of signal intensity required to ensure successful detection of the ultrasound pulse trains by the signal receiver. The Bond graph models established have shown to be useful in optimizing the design of the various constituent components within the sensing system to achieve high energy conversion efficiency under a compact size, which are critical to successful embedment within the mold structure.

• New & Renewable Energy
• /
• v.18 no.1
• /
• pp.17-28
• /
• 2022

This paper presents an effective Markov transition matrix (EMTM), which will be used to calculate the wind speed at the target site in a wind farm to accurately predict wind energy production. The existing MTS prediction method using a Markov transition matrix (MTM) exhibits a limitation where significant prediction variations are observed owing to random selection errors and its bin width. The proposed method selects the effective states of the MTM and refines its bin width to reduce the error of random selection during a gap filling procedure in MTS. The EMTM reduces the level of variation in the repeated prediction of wind speed by using the coefficient of variations and range of variations. In a case study, MTS exhibited better performance than other MCP models when EMTM was applied to estimate a one-day wind speed, by using mean relative and root mean square errors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.665-671
• /
• 2003

A factorial experiment was conducted to assess nutrient utilization by growing lambs maintained on three levels each of digestible energy (high: HE, medium: ME, low: LE) and protein (high: HP, medium: MP, low: LP) in nine combinations (HEHP, HEMP, HELP, MEHP, MEMP, MELP, LEHP, LEMP, LELP). The experiment was conducted during the hot season in a semiarid location. Daily dry matter intake (DMI) was similar in all the groups in terms of unit body weight or metabolic body size. Digestibility of DM and nitrogen free extract increased (p<0.01) from low to medium and high energy regimen while the CF digestibility followed a reverse trend. The digestibility of crude protein (CP) decreased from high to medium and low protein regimens while it was similar in terms of energy variation. Nitrogen intake was higher in high followed by medium and low protein regime while fecal and urinary nitrogen loss were similar in all the treatment groups. Lambs in all the three levels of protein were in positive N balance and percent N retention was higher (p<0.01) in high followed by medium and low protein levels whereas it was similar in terms of energy variation. Initial body weight was similar in all the groups while final weight, total gain in the experiment and average daily gain (ADG) were higher in high than medium and low energy regimens. It is concluded that crossbred lambs required 75.1 g DM, 9.6 g CP, 6.3 g DCP and 711 KJ DE/kg W $^{0.75}$or 11.0 g CP/MJ DE or 7.2 g DCP/MJ DE for 93 g average daily gain in a hot semiarid environment.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.119-125
• /
• 2014

This study investigated the effects of pipe network materials and distance on system performance utilizing unused energy sources in large-scale horticulture facility. For this, the modeling was performed with a 100 m long and 100 m wide rectangular shaped glass house having an area of 1ha ($10,000m^2$) using EnergyPlus software. The heat sources considered were air source, geothermal heat, power plant waste heat, sea water heat, and river water. The temperature variation of the fluid with regard to pipe material and distance from the heat source and the resultant heat pump electricity consumptions were calculated. It turned out that the fluid temperature reaching the heat pump increased as the distance from the heat source increased in case of sea water and river water, which have higher temperatures than the surrounding soil, improving the heat pump efficiency. It was vice versa in case of the power plant waste heat. In addition, pipe material of PVC showed the smallest effect on the system performance variation due to the lowest thermal conductivity, compared to PB and HDPE.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.49-56
• /
• 2016

The objective of this work is to analyze the variation in energy performance for each flat plate collector connected in series. In this study, it was assumed that solar water heating system with annual solar fraction of 60% was installed in an office building in Seoul, South Korea. The transient energy performance corresponding to four cases, which are selected using different solar radiation and outdoor air temperature, is studied by analyzing the variation in outlet temperature, solar useful heat gain, and thermal efficiency of each collector. It is observed that the useful heat gain and the collector efficiency decrease continuously, and outlet temperature increases when increasing the number of collector connected in series. The long-term performance is assessed by evaluating the thermal efficiency of each collector for two solar radiation conditions ranging from 780 to $820W/m^2$ and from 380 to $420W/m^2$. It is found that the differences between the intercept and slope of the efficiency curves for first and eighth collectors are 3.68% and 6.74% for solar radiation of $800{\pm}20W/m^2$ and 8.57% and 12.90% for solar radiation of $400{\pm}20W/m^2$, respectively. In addition, it is interesting to note that annual useful heat gain and collector efficiency are reduced with similar rate of about 6.13% when increasing the collector area by connecting the collectors in series.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.2
• /
• pp.73-78
• /
• 2010

Wave energy is dissipated mainly by friction on the seabed until the waves reach the surf zone. Many researchers have investigated the mechanism of wave friction and the bottom shear stress induced by wave motion at a certain point is now well estimated by introducing the wave friction factor related to the near bed velocity given by linear wave theory. The variation of wave energy or wave height over a long distance can be, however, estimated by an iteration process when the propagation of waves is strongly influenced by bed friction. In the present study simple semi-theoretical equation has been developed to compute the variation of wave height for the condition of wave propagation on a constant beach slope. The ratio of wave height is determined by the product of shoalng factor and wave height friction factor (frictional wave energy dissipation factor). The wave height estimated by the new equation is compared with the wave height estimated by the solution of numerical integration for the condition that the waves propagate on a constant slope.

• Korean Journal of Breeding Science
• /
• v.40 no.1
• /
• pp.15-21
• /
• 2008

It was previously pointed out that mutation is the ultimate source of variation. Adequate variation is needed for plant breeding if there is a limitation in natural genetic resources. When the ionizing radiation has been known to cause chromosomal and genomic alternations, it is widely used for inducing mutagenesis. The electron beam as an ionizing radiation is the principal physical mutagens that induces mutation and effectively used in plant breeding. Since dose-response relationships of electron beam in plant species are rarely known, we investigated the seed germination rate and early seedling growth of irradiated seeds of creeping bentgrass (Agrostis palustris Huds., cv Penn-A1) with various electron beam irradiating conditions (1, 1.3, 2 MeV at both 0.03 mA and 0.06 mA with dose of 100 Gy (Gray) and 0.03, 1, 1.3, 2 MeV at 0.03 mA with dose of 200 Gy, respectively) using electron accelerator at Korea Atomic Energy Research Institute. The growth parameters in terms of shoot length, primary root length, and secondary root length showed similar response between 0.06 / 1 (mA / MeV) at 100 Gy and 0.03 / 0.3 (mA / MeV) at 200 Gy. Bentgrass seed germination was mainly affected by the intensity of irradiated dose (Gray). Germination rate was lowered as the irradiated dose increased. On the other hand, early seedling growth was mainly governed not by the dose of radiation but by voltage.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.55-62
• /
• 2006

Correlations between air-temperature variation and SST variation around Jeju Island have been studied with data JRMO($1924{\sim}2004$) and NFRDI($l971{\sim}2000$). Air-temperature has increased about $0.02^{circ}C/year$ for the period of $1924{\sim}2004$ but relatively high 0.035/year for the last 30 years. SST has increased about $0.024^{circ}C/year$ for the period of $1971{\sim}2000$ and relatively high $0.047^{circ}C/year$ in December. According to the analysis of time series of the two kind of variation, the SST and air-temperature are positively correlated. They are generally in phase, and SST anomaly is similar to air-temperature anomaly as well. Consequently, SST variation has high correlation with air-temperature variation around Jeju Island.