• 대한전자공학회논문지
• /
• 제26권2호
• /
• pp.94-101
• /
• 1989

MONTE-CARLO 시뮬레이션 방법을 이용하여 AlGaAs/GaAs MODFET의 Q-2DEG에서의 전자 에너지, 전자의 비행거리, 계곡 내 전자 점유분포, 전자의 평균 속도 등 각각의 천이특성을 전계를 달리하여 계산하였다. 전계가 강할수록 전자가 (100)계곡으로 급격하게 천이하며 속도 오버슈트가 급격하게 발생함을 알 수 있었다. 즉 속도 오버슈트와 같은 비정상상태를 포함한 전자 전달 특성을 얻을 수 있다. 이러한 결과를 토대로 AlGaAs/GaAs MODFET와 같은 Q-2DEG를 이용한 이종접합 디바이스에서 속도 오버슈트가 전자의 고이동도를 얻는 중요한 요소가 될수 있음을 알 수 있다. 전계가 증가함에 따라 (100)계곡으로 천이하는 전자는 현저하게 증가하였다. 전자 천이 지속 시간은 전계 E=7KV/cm의 경우 1.4psec에서 전계 E=12KV/cm의 경우 0.7psec로 감소하였다. 전계 E=12KV/cm의 경우 Q-2DEG 전자는 천이 지속 시간동안의 속도 최대값이 실온에서 정상상태 속도 보다 거의 8배의 값을 갖는다. 속도 오버슈트에의한 Q-2DEG에서의 속도 향상은 서브 마이크로 게이트 단위의 AlGaAs/GaAs MODFET의 고이동도에 영향을 끼칠 수 있다. GaAs 벌크와 Q-2DEG에서의 속도 특성을 비교하여 전계 7KV/cm를 가했을 경우 2DEG의 속도 최대값은 GaAs 벌크에 비해 더 큰 값을 얻었다. GaAs에 비해 Q-2DEG에서의 산란이 덜 일어 남으로써 속도 오버슈트가 Q-2DEG에서 더 일찍 일어나며 GaAs 벌크 전자는 Q-2DEG 전자에 비해 전계에 의한 영향을 덜 받음을 알수 있으며, GaAs에 비하여 Q-2DEG는 속도천이하는 동안 속도 값이 더 크고 빠르게 천이하는 사실로써 GaAs 벌크를 이용한 디바이스보다 Q-2DEG를 이용하는 것이 더 큰 전자 이동도를 얻을 수 있으리라 생각한다. B2가 1.74mg% 함유되어 있었으며 지용성 비타민으로는 비타민 A가 1.22mg%, 비타민 E는 0.32mg%로 미량 함유되어 있었다.신은 최내엽 양상추의 부위별 질산염 최저치와 최고치 차이는 중록 10.4배 엽신 11.1배에 머물렀다. 5. 외부엽 1g 섭식 대비 내부엽 1g 섭식시의 ${NO_3$}^- 섭취량은 배추의 경우 3.72배, 양배추의 경우 4.18배, 양상추의 경우 6.50배나 많았다. 6. 결론적으로 같은 량의 엽채류를 섭식하면서 일일 질산염 섭취량을 줄이기 위해서는 배추, 양배추, 양상추 모두 외부엽보다는 내부엽을 선택적으로 소비하는 것이 바람직함을 알 수 l있었다.었다. 6. 녹즙 종류별 ${NO_3}^-$ 함량은 당근녹즙(143ppm) < 명일엽(506ppm) < 돌미나리(669ppm) < 케일녹즙(985ppm) 순으로 많았고, Vitamin C 함량은 당근(43ppm) < 돌미나리(289ppm) < 케일(353ppm) < 명일엽(768ppm)의 순으로 높았다. 7. 일일 ${NO_3}^-$ 섭취량은 500ml의 녹즙을 마시는 경우 명일엽 253mg, 돌미나리 335mg, 케일 483mg으로 녹즙만으로도 이미 WHO/FAO의 일일 ${NO_3}^-$ 섭취허용량보다 1.16배, 1.53배, 2.21배나 초과할 수 있는 것으로 나타났다. 연약한 곤충의 방제에 효과적인 것으로 나타났다. 따라서 제조된 살충비누를 활용하면 환경친화적인 해충방제가 가능하다고 판단되었다.소변의 이상소견이 발견되어 신장 조직검사를 실시할 경우 혈청 $C_3$치의 감소 여부에 관계없이 MPGN도 진단적 고려 대상이 되어야 한다고 생각한다.신장 조직검사를 시행한 결과 진행성 경과를 취할 수 있는 막 증식성 사구체 신염과 매우 희귀한 증례인 신유전분증

• 항공우주정책ㆍ법학회지
• /
• 제spc호
• /
• pp.35-58
• /
• 2007

우주활동이 환경과 관련되어 문제가 되는 것은 우주의 탐사활동과 이용을 통해 우주공간이나 천체 및 지구의 환경이 현저하게 오염될 수 있기 때문이다. 특히 우주에서 핵연료(Nuclear Power Sources; 약칭하여 'NPS')를 사용하는 위성이나 우주물체가 기능부전(malfunction)으로 인하여 지구에 재진입하면서 추락했을 경우, 그에 따른 재앙은 실로 엄청날 것이다. 1961년 미국에서 원자력 발전기에 의한 인공위성을 쏘아 올린 이래 원자로를 핵연료로 이용한 원자력위성은 무수히 많다. 주로 달이나 혹성에 발사하는 위성이라든지 군사적인 목적을 띤 위성이 주로 이러한 위성들인데 이들이 우주공간에서 파괴되던가 또는 지표면에 충돌하는 경우에 발생하는 피해는 상당히 심각한 것으로 우려되고 있다. 본 논문은 이와 관련하여 대표적인 인공위성 추락사건인 1978년 소련의 핵원료 위성 Cosmos 954 사건과 이로 인해 UN내에서 '외기권 우주의 평화적 이용에 관한 위원회'(Committee on the Peaceful Uses of Outer Space : 약칭하여 'COPUOS')를 통해서 장기간 논의하다가 1992년 UN총회의 결의를 통해 채택된 "우주에서의 핵원료사용에 관한 원칙"(Principles Relevant to the Use of Nuclear Power Sources in Outer Space; 일명 'NPS원칙')의 내용과 그것의 우주법적 의미에 관하여 살펴보았다. 우주법으로서는 1967년 우주조약, 1968년 구조협정, 1972년 책임협약, 1976년 등록협약, 1979년 달조약의 관련조항을 들 수 있고, 그밖에 핵관련조약들과 국제환경법상 일반원칙들을 살펴보았다. NPS원칙과 같은 연성법은 조약과 같은 경성법에 비하여 효력면에서 구속력은 없으나 국가들이 점차 수용할 때 그것은 국제관습법이 될 수 있으며 국제관습법은 모든 국가를 구속한다는 점에서 그 의의를 찾을 수 있다. 예를 들어 1963 년 12윌 13 일 UN총회가 우주의 법적지위에 관하여 우주 활동을 규제하는 법원칙인 "외기권 우주의 탐사 및 이용에 관한 국가들의 활동을 규제하는 법원칙의 선언"(Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space)을 채택하였는데 이는 1967년 우주조약으로 발전하였다. 조약의 체결에도 불구하고 아직도 이 결의가 중요한 의미를 가지고 있는 것은 이 결의의 주요내용인 우주이용의 자유체제, 우주의 점령이나 주권주장을 통한 전유화 금지, 국제법의 준수, 국제책임, 우주비행사의 구조, 인류 전체의 이익지향 등의 원칙들이 국제관습법으로 발전하여 현재 우주관계법에 가입하지 않은 국가들도 구속하고 있다는 점이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권5호
• /
• pp.403-414
• /
• 2005

The purpose of this study was to identify the effectiveness of the modified distraction osteogenesis (DO) method with the concept of overdistraction and compression stimulation which have been previously suggested by the authors in 2002 and to explore the optimal distraction-compression ratio and appropriate latency period for the compression force application during consolidation. The experimental specimens were assessed with radiography, histologic findings, and dual energy x-ray absorptiometry (DEXA) after the conventional DO method and the modified DO technique had been applied on rat mandibles. Total 60 rats were used for the study. In experimental group of 54 adult rats, mandibular osteotomies between the first and second molar areas were performed and customized external distractors were applied. The surgeries on 6 rats of control group also were done with same osteotomy technique and DO device application. Final amount of distraction was set-up as 2 mm on both groups. But, in a experimental group of 54 rats, distraction osteogenesis with a compression force were performed with the different distraction-compression ratio and variant latency periods for compression. The three ratio-subgroups were made as distraction 4 mm group with compression 2 mm, distraction 3 mm group with compression 1 mm, and distraction 2.5 mm group with compression 0.5 mm. In addition, The three subgroups with 3, 7, 11 days latency period prior compression were allocated on each ratio-subgroups. Total 9 subgroups consisted of 6 rats on each subgroup. In control group of 6 rats, conventional distraction technique were routinely performed. The rats of control groups were sacrificed on postoperative 3, 6 weeks after 2 mm distraction. The rats in the experimental groups also were sacrificed on the same euthanasia days of control groups to compare the wound healing. Final available specimens were 55 rats except 5 due to osteomyelitis, device dislodgement. Distraction-compression combined group on 6 weeks generally had showed increased bone mineral density than the same period group of conventional distraction technique on the DEXA study. More matured lamellar bone state and extended trabecular pattern in the combined group than those of control group were also observed in the histologic findings on 6 weeks. In the distraction-compression combined groups, the bone density of 2.5 mm distraction subgroups with 0.5 mm compression showed the highest value on the DEXA study among various force ratio groups. In the distraction-compression combined groups, the bone density of 3 day latency period subgroups showed the highest value on the DEXA study among various latency period groups for the compression application. From this study, we could deduce that 1/5 force ratio for the compression versus distraction, 3 day latency period prior compression application would be the most effective condition if modified distraction osteogenesis technique might be applicable. The modified DO method with a compression force may improve the quality of bone regenerate and shorten total treatment period in comparison with conventional DO technique clinically.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• 자원환경지질
• /
• 제42권4호
• /
• pp.289-300
• /
• 2009

태백산 광화대 중부에 위치한 거도광산은 최근 수 십년간 휴광상태이지만, 1963년부터 철과 동을 개발하였던 지역이다. 거도광산 지역은 장산규암, 묘봉층, 풍촌층, 화절층, 동점층 및 두무골층과 후기에 이를 관입한 백악기 어평화강 암체로 구성되어 있다. 거도 스카른을 형성시킨 어평화강암체의 조성은 상대적으로 산화된($Fe_2O_3/FeO=0.3{\sim}1.1$) 자철석계열의 석영몬조섬록암과 화강섬록암으로, 이들의 관입은 묘봉층, 풍촌층 및 화절층 내에 스카른 광화작용을 발달시켰다. 근지 외성 스카른은 어평화강암체 인근의 철이 부화된 안드라다이트(andradite) 석류석($Ad_{44-95}Gr_{1-53}$)이 우세한 지역에서 점차 멀어지면서 철이 결핍된 투휘석($Hd_{10-100}Di_{0-89}$)이 우세한 지역의 순으로 대상분포를 보인다. 이러한 석류석과 휘석의 다른 분포 특성은 모암의 조성 및 물/암석비 등의 차이에 기인된 것으로, 전체 스카른 시스템의 산화정도를 평가하는 중요한 요소이다. 거도광산의 금은 주로 근지의 적갈색 내지 갈색의 석류석이 우세한 스카른에서 산출되며, 성인적으로 함 비스무스-텔루륨 광물들과 밀접한 공생관계를 가진다. 거도광산의 금광작용과 관련된 관입암의 화학조성, 스카른대의 분포와 금의 산출특성 등은 산화형 스카른 금광상의 환경을 지시하며, 높은 석류석/휘석비를 갖는 스카른대가 탐사대상이 된다. 그러나 연구지역의 수평적 대상분포 외에 수직적 대상분포 특성에 대한 정밀탐사가 요구된다. 이는 거도광산 스카른대의 3차원적 이해를 가능하게 하며, 보다 체계적 탐사 및 구체적 개발 방안을 제시하는 중요한 기반을 제공할 것이다.

• 대한한의학원전학회지
• /
• 제13권1호
• /
• pp.269-303
• /
• 2000

The xin(心) has various meanings in ${\ll}$Huangdineijing(黃帝內經)${\gg}$ but they sometimes contradict each other. This thesis divided the xin into the meaning and the Zang-xiang(藏象), and then analyzed the xin's notion in detail. The concept of the xin in ${\ll}$Huangdineijing(黃帝內經)${\gg}$ is sorted out into : the notion of space, yin-yang five elements(陰陽五行) and shen(神) The xin is the upper part of body and it possesses the character of yang(陽). So the concept of the breast has originated from this character and it rightly belonged to the top. The xin is assigned to fire among five elements, 'chang(長)', which has the energy of moving forward, noon at a day when yang-qi(陽氣) is properous and shows 'gu(鉤)' & 'keo(矩)' in pulse condition. The xin possesses the character, 'Taiyang of the yang(陽中之太陽)' along with the notion of space combined with five elements. That is, the notion of upper space means 'of the yang(陽中)', and, fire in five elements means 'yang'. This is similar to '=(Taiyang)' of Sasang(四象) at ${\ll}$the Book of Changes(周易)${\gg}$ Since the xin puts shen(神) in order, actions of spirit have effect on the xin. And it depends whether the sense of vitality is broad or narrow. The xin related with broad sense of spirit is 'monarch of the organs(君主之官)'. Therefore it has control over the human body. As it also directly effects the life or death, Pericardium(心句) substitutes the xin and protects the external invasion. In Shi-er-won(十二原) and Bonsu(本輸), instead of the Xin Channel the Pericardium Channel was used in healing patients. The xin can be interpretable as the mind, because the xin includes spirit. The mind can be distinguished into 'desire' and 'state of profound reason'. In ${\ll}$Huangdineijing(黃帝內徑)${\gg}$, the disease of the xin caused by emotion was mentioned many times. This emotion is 'desire' which resorted to the sentiment. The reason one mind has both character is; man preserves given principle (reason) and emotion reveals via the reason exercised. The above is about the xin related with the broad sense of vitality. Concerning the narrow sense of vitality, one of the five vitalities is stored with the others away in the five solid organs. Then it takes part in the operation of five body constituents and it is linked with the personified description of five solid organs. The xin, spleen, stomach and kidney are 'the ground of life'. Spleen and stomach are the origin of making qi and blood, which 'means the ground after birth'. Kidney keeps the essence of life, and manages the growing and generative function of human body. The xin keeps 'Shin-myung(神明)', in other words, it has control over and supervise whole activity of body. Therefore xin's role is needed for the appropriate working of spleen, stomach and kidney. And 'Shin-myung' is its motive power. In ${\ll}$Huangdineijing(黃帝內經)${\gg}$, the reason why xin was assigned to September and October is that yang-qi of the human body goes to the inner part, with xin at the same time. This explains that yang-qi of the human body is adapted to change of season and goes into xin-fire(心火) in order to get away from the cold. In this case, heart means more inner part than liver, spleen and lung. Mengzi(孟子), philosopher of the China's turbulent ages emphasized the thinking function of xin. Sunzi(荀子) asserted that xin is 'heaven monarch(天君)' and the other organs are 'heaven rninisters(天官)'. This conception is similar to 'monarch of the organs' of ${\ll}$Huangdineijing(黃帝內經)${\gg}$. After the Ming Dynasty, commentators of Huangdineijing(黃帝內經) explained the heart, as 'monarch of the organs', or 'the master of body(一身之主)'. This was due to the influence of Sung Confucianism.

• 농업과학연구
• /
• 제12권1호
• /
• pp.75-85
• /
• 1985

본(本) 연구(硏究)는 Lignosulfonic Acid계(系) 감수제(減水劑)를 첨가(添加)한 모르터의 유동성(流動性) 개선(改善)과 강도변화(强度變化)를 구명(究明)하고자 시행(施行)하였다. 1. Plastic 상태(狀態)에서 Pozzolith-84의 첨가량(添加量)을 늘리면 Flow가 증가(增加)하였다. 이는 Pozzolith-84의 첨가(添加) 시(時) 전기적(電氣的) 이중층(二重層)이 형성(形成)되어 시멘트 입자(粒子) 상호간(相互間)에 반발력(反撥力)이 생겨 분산(分散)된 것으로 이 분산작용(分散作用)은 술폰산기(酸基)의 계면활성작용(界面活性作用)에 기인(基因)되며, 시공성(施工性)이 개선(改善)됨에 따라 Precast 제품(製品) 생산(生産) 시(時) 비용절감(費用節減)의 효과(效果)가 있으며, 단위수량감소(單位水量減少)에 의(依)해 구조물(構造物)의 내구성(耐久性)이 개선(改善)된다. 2. 경화(硬化)된 상태(狀態)에서는 P/C가 0.2, 0.4%일 때 보통(普通)모르터의 강도(强度)보다 다소증가(多少增加)되었으며, P/C가 0.8% 이상(以上)일 때 보통(普通) 모르터의 강도(强度) 보다 감소(減少)된 것은 잔류(殘留) 술폰산(酸)($SO_3H$), 무수유산(無水硫酸)($SO_3$)의 화학반응(化學反應)에 의(依)한 것으로 생각된다. 3. 비중(比重)과 압축강도(壓縮强度) 분석(分析) 결과(結果) 고도(高度)의 유의성(有意性)이 있었으며 비중(比重)이 커짐에 따라 압축강도(壓縮强度)도 역시 증가(增加)되었고, 재령(材齡) 7일(日)과 28일(日)의 강도(强度) 분석(分析) 결과(結果) 고도(高度)의 유의성(有意性)이 있었으며, 재령(材齡) 7일(日)의 압축(壓縮) 강도(强度)가 클수록 인장(引張) 휩강도(强度)도 역시 크게 나타났다. 4. Pozzolith-84는 펄프공업(工業)의 폐기물(廢棄物)인 Lignosulfonic Acid Type이며 이를 실용화(實用化)하면 산업폐기물(産業廢棄物)의 활용(活用)에 유익(有益)하다고 생각된다.

• 한국환경교육학회지:환경교육
• /
• 제6권1호
• /
• pp.63-99
• /
• 1994

The international environmental activities and environmental education began in 1970's. Environmental education in Korea was emphasized since the Forth National Curriculum. 'The Environmental Education Curriculum' will be separated as one of the most important parts in the Sixth National Education Curriculum in Korea. The purpose of this study was development. of 'Environmental Science' of high school appropriate to Sixth National Education Curriculum. First step was to state goals of environmental education in detail based on analysis of goals about environmental education in our country and other countries. Second was to analyse seven environments-related texts of Korea, America and England. Third, to measure how much environmental education has achieved in Fifth National Curriculum of Korea. Fourth, to develop a new environmental text of high school level. Fifth, to verify the effect of developed environmental text. The environmental part of 'Science I'(unit V. Life and Environments) and high school environments-related reference text(Survival and Environments) in Korea, American knowledges. American 'Environments' was stressed in many skills but they didn't include various teaching strategies. On the other hand, American 'Science-Technology-Society(S-T-S)' and British 'Science and Technology in Society(SATIS)' were stressed in knowledges and skills, and they included many teaching strategies and student actions. American 'S-T-S' was the only one stressed in values and attitudes. And all seven texts were not interested in behaviors and participations. To measure the achievement of environmental education by questionnaire, 497 high school students in total were selected from five different schools. Actually, most students had a positive thinkings and attitudes in their hearts about environmental problems, about environmental problems, but many of them did not take actions to solve environmental problems and to protect environments. The higher the score students got in 'knowledges and informations', the higher the score in 'skill'. It implies that learning of skills is based on learning of knowledges and informations about environments. On the other hand, much knowledges and information about environments has not always ensured positive thinkings and attitudes or active behaviors and participations to solve environmental problem. In view that ultimate aim of environmental education is forming responsible environmental behaviors and the goals of values and behaviors are as important as knowledges and skills. A new environmental text of high school level was developed and it was based on analysis of seven texts and environmental education in Fifth Korean Curriculum. This text have seven units, 1. Habitates : What're the meanings?, 2. Nuclear Energy : Can't be Avoid?, 3. Acid Rain : What're the Messages?, 4. Ethanol : Is this Future Fuel?, 5. Wastes : A New War!, 6. What're the National and Gloval Environmental education and avoided from the array of knowledges. Therefore included various teaching strategies and independent actions of students. 'Open-ended value learning' and 'free behavior learning' in text were special learning parts for aquisition of values and formation of behaviors. To verify the effects. of new developed environmental text, the direct learning was carried out by 286 students in total. Post test scores of experimental groups per each units were significantly higher than those of control groups from five different schools were as follows. For validity of selecting contents for units, 74% of respondent replied positively. For classification and presentation of four goal-groups, 90% replied positively in validity and 82%, in utility. For validity of various teaching strategies, 88% and for the degree of including student-centered independent actions, 86% replied positively, For importances and expected effects of 'open=ended value learning' and 'free behavior learning', showed positive responses respectively, 88%, 92% Therefore this text is effective to achieve four goals of environmental education equally.

• 한국재료학회지
• /
• 제8권12호
• /
• pp.1158-1164
• /
• 1998

깁사이트를 황산수용액에 용해하여 제조된 황산알루미늄 용액에 에틸알코올을 사용하여 결정을 석출시킨 후 여과, 건조를 통하여 수황산알루미늄 결정 [$Al_2(SO_4)_3$ · $nH_2O$]을 제조하였다. XRD분석 결과 수황산알루미늄에 포함된 결정수는 n=18, 16, 12, 0이었으며, TG분석 결과 평균결정수($n_{av}$)는 14.7이었다. 수황산알루미늄을 열처리한 결과 $800^{\circ}C$에서는 무수황산알루미늄, $900^{\circ}C$와 $1000^{\circ}C$에서는 $\gamma-Al_2O_3$, $1200^{\circ}C$에서는 $\alpha-Al_2O_3$의 생성을 확인할 수 있었다. $\gamma-Al_2O_3$에 니켈피착을 위하여 0.025M농도의 황산알루미늄과 황산니켈을 사용하고 $Ni^{+2}$ 이온과 $Al^{+3}$ 이온의 농도비가 0.5인 혼합용액을 제조한 후 $\gamma-Al_2O_3$ 분말을 혼합하여 슬러리를 제조하였다 제조된 혼합슬러리에 우레아와 $NH_4OH$수용액을 첨가하여 pH를 9.0로 조절하고 $80^{\circ}C$에서 니켈피착을 하였으며, 니켈피착의 진행사항은 ORP(oxidation reduction potential), 전도도 그리고 pH값을 측정하여 관찰하였다. 니켈량에 따른 니켈피착 $\gamma-Al_2O_3$의 특성을 조사하기 위하여 피착된 $\gamma-Al_2O_3$를 $900^{\circ}C$에서 열처리하고 비표면적 변화와 열확산도를 측정하였다. 또한 $1250^{\circ}C$에서 니켈피착 $\gamma-Al_2O_3$의 열안정성은 비표면적과 XRD의 결정상변화로 확인하였다 니켈피착 $\gamma-Al_2O_3$의 표면은 XPS분석으로 Ni $2P_{3/2}$의 화학결합에너지의 변화를 확인한 결과 $NiAl_2O_4$, 상의 화학결합에너지가 증가되었다. 본 연구 결과로 니켈피착 $\gamma-Al_2O_3$가 순수 $\gamma-Al_2O_3$에 비하여 열적 안정성을 지닌 것으로 확인 되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.