• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.465-479
• /
• 2018

Purpose: This study examined the frequency of sugar-sweetened beverage consumption in Korean adolescents and the major factors influencing the excessive consumption of sugar-sweetened beverages, such as sociodemographic characteristics, health-related behaviors, psychological characteristics, and dietary habits. Methods: The analysis was performed using the data from the 2017 Korean Youth Risk Behavior Web-based Survey. The subjects included in the analysis were 30,885 middle school students and 31,391 high school students, totaling 62,276. The frequency of sugar-sweetened beverage consumption was calculated by summing the consumption frequencies of soda, high caffeine or energy drinks, and sweet beverages over the last 7 days. The Rao-Scott chi-square test, reflecting information on the sampling design, was used to test the differences in the rate of sugar-sweetened beverage consumption according to each factor. Logistic regression analysis was performed to examine the factors influencing the excessive consumption of sugar-sweetened beverages. Results: The rate of sweetened beverage consumption was higher in boys than in girls, in high school students than in middle school students, in students whose father's education level was lower, in those whose subjective academic performance was lower, and in those who smoked or consumed alcohol. In addition, the rate of sugar-sweetened beverage consumption was higher in those who experienced severe stress, suicidal ideation, sadness, or a sense of despair. The rate of sugar-sweetened beverage consumption was also high in those who skipped breakfast; who frequently consumed fast foods, ramen, or snacks; and who frequently ate meals at convenience stores, supermarkets, or school stores. Conclusion: The rate of sugar-sweetened beverage consumption in Korean adolescents is related to various factors, such as sociodemographic characteristics, health-related behaviors, psychological characteristics, and dietary habits.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.105-111
• /
• 2014

The purpose of this study was to characterize equine heat-shock protein (Hsp) genes and analyze their expression pattern in various horse tissues and blood leukocytes after exercise. In a previous study, RNA sequencing of blood and skeletal muscles of thoroughbreds before and after exercise was performed using differently expressed gene (DEG) analysis. Three Hsp genes (HspH1, Hsp90${\alpha}$ and Hsp70) were selected by DEG analysis and were found to be differentially expressed in either blood or muscle. To validate and extend previous observations on these genes, we performed RT-PCR analyses of horse tissue as well as real-time qPCR analyses of blood leukocytes after exercise. mRNA expression of these Hsp genes was found to be ubiquitous in the analyzed tissues (including thyroid, colon, skeletal muscle, cecum, kidney, spinal cord, heart, and lung). In addition, Hsp mRNA expression of these genes in extracted whole blood increased after 120 minutes of exercise compared to the baseline condition. These results are in agreement with the results of human and other experimental animals, suggesting that regulatory mechanisms that are responsible for upregulation of Hsp gene transcription may be conserved among species. Further investigations to correlate Hsp gene expression patterns with athletic performance or recovery processes after exercise are warranted.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.25-38
• /
• 2020

Photoelectrochemical water splitting has been considered as the most promising technology for generating hydrogen energy. Transition metal dichalcogenide (TMD) compounds have currently attracted tremendous attention due to their outstanding ability towards the catalytic water-splitting hydrogen evolution reaction (HER). Herein, we report the synthesis method of various transition metal dichalcogenide including MoS₂, MoSe₂, WS₂, and WSe₂ nanosheets as excellent catalysts for solar-driven photoelectrochemical (PEC) hydrogen evolution. Photocathodes were fabricated by growing the nanosheets directly onto Si nanowire (NW) arrays, with a thickness of 20 nm. The metal ion layers were formed by soaking the metal chloride ethanol solution and subsequent sulfurization or selenization produced the transition metal chalcogenide. They all exhibit excellent PEC performance in 0.5 M H₂SO₄; the photocurrent reaches to 20 mA cm^-2 (at 0 V vs. RHE) and the onset potential is 0.2 V under AM1.5 condition. The quantum efficiency of hydrogen generation is avg. 90%. The stability of MoS₂ and MoSe₂ is 90% for 3h, which is higher than that (80%) of WS₂ and WSe₂. Detailed structure analysis using X-ray photoelectron spectroscopy for before/after HER reveals that the Si-WS₂ and Si-WSe₂ experience more oxidation of Si NWs than Si-MoS₂ and Si-MoSe₂. This can be explained by the less protection of Si NW surface by their flake shape morphology. The high catalytic activity of TMDs should be the main cause of this enhanced PEC performance, promising efficient water-splitting Si-based PEC cells.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2018

Recently, there has been rapid development in the field of flexible electronic devices, such as organic light emitting diodes (OLEDs), organic solar cells and flexible sensors. Encapsulation process is added to protect the flexible electronic devices from exposure to oxygen and moisture in the air. Using numerical simulation, we investigated the effects of the encapsulation layer on mechanical stability of the silicon chip, especially the fracture performance of center crack in multi-layer package for various loading condition. The multi-layer package is categorized in two type - a wide chip model in which the chip has a large width and encapsulation layer covers only the chip, and a narrow chip model in which the chip covers both the substrate and the chip with smaller width than the substrate. In the wide chip model where the external load acts directly on the chip, the encapsulation layer with high stiffness enhanced the crack resistance of the film chip as the thickness of the encapsulation layer increased regardless of loading conditions. In contrast, the encapsulation layer with high stiffness reduced the crack resistance of the film chip in the narrow chip model for the case of external tensile strain loading. This is because the external load is transferred to the chip through the encapsulation layer and the small load acts on the chip for the weak encapsulation layer in the narrow chip model. When the bending moment acts on the narrow model, thin encapsulation layer and thick encapsulation layer show the opposite results since the neutral axis is moving toward the chip with a crack and load acting on chip decreases consequently as the thickness of encapsulation layer increases. The present study is expected to provide practical design guidance to enhance the durability and fracture performance of the silicon chip in the multilayer package with encapsulation layer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.781-788
• /
• 2021

Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (Z_Pb: 82, Z_O: 8) and density (9.53 g/cm³) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R² value of 0.9990, which satisfied the evaluation criteria R² 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.2
• /
• pp.169-178
• /
• 2021

The Korean girl group "Kara" has suffered the trilemma of its de facto failure to debut, the crisis of team breakup, and the CEO crisis of the agency. But the group has made an outstanding achievement in the history of Korean pop music after overcoming all odds. Their success strategy has never been disclosed by insiders involved in Kara's total music projects. This study has been carried out in the analysis of the strategy to provide academic implications and to honor the contribution of the late CEO Ho-yeon Lee and Kara's key member Ha-ra Gu. Therefore, between Nov. and Dec. 2020, we conducted in-depth interviews with managers, composers, stylists and Ha-ra Gu(Only in 2019, before her death) who took part in the project. The research model is set up by combining Porter's Competitive Advantage Strategy and the music value chain model into categories of "Product Innovation Differentiation (PD)" (producing, album production, performance activities) and "Marketing Differentiation (MD)" (market targeting, image specialization, promotion and communication). The analysis showed that the PD focused on complete rediscovered harmonization and revalued members' personality and sincerity with peppy songs and dainty dances as well as emission of "bright energy" which caused healing effects instead of mimicking other star singers recklessly. In terms of MD, they selected Japan's 10-20s as their main market, increasing intimacy with fans and media with the image of cute+pretty+classy+sexy. The result suggests that Poter's differentiation can function as a meaningful strategy frame in the fostering, hit, and revival of idol groups. In addition, it reaffirmed that spontaneous and passionate activities of early-stage or celebrity fan may serve as a valid catalyst for realizing differentiation, as Kara's caller of Japanese actor Gekidan Hitori caused a strong "priming effect" that drove Kara's unexpected wonderful success in Japan.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.971-980
• /
• 2013

Dried stoned olive pomace (DSOP) was administered to dairy water buffaloes, and their productive performance and milk composition were analysed. Sixteen pluriparous lactating buffaloes were divided into two uniform groups (control and experimental), taking into consideration the following parameters: milk production (2,192 and 2,102 kg) and duration of lactation (254 and 252 d) of the previous year, distance from calving (51 and 43 d), milk production (9.71 and 10.18 kg/d), body condition score (BCS) (6.44 and 6.31) and weight (617 and 653 kg) at the beginning of the trial. Both diets had the same formulation: second cut alfalfa hay 20%, corn silage 42%, concentrate 38% but the two concentrates differed in their formulation, the experimental one contained 15.50% of DSOP as fed. The employed DSOP showed high amounts of secoiridoids, such as 3,4-dihydroxyphenylethanol (3,4-DHPEA) (1.2 g/kg DM), 3,4-dihydroxyphenylethanol-elenolic acid di-aldehyde (3,4-DHPEA-EDA) (12.6 g/kg DM), p-hydroxyphenylethanol-elenolic acid di-aldehyde (p-HPEA-EDA) (5.6 g/kg DM) and lignans, which are known to be powerful bioactive compounds. The control diet had an energy-protein content of 0.86 Milk FU/kg DM and 143.3 g/kg DM of crude protein, whereas the experimental diet of 0.87 Milk FU/kg DM and 146.6 g/kg DM of crude protein. Each animal of the two groups received 17 kg DM/d and each buffalo of the experimental group, by way of the concentrate, ingested 1.05 kg DM/d of DSOP. The trial lasted 40 days. No significant difference was found between the BCS (6.41 and 6.53), live weight (625.93 and 662.50 kg) and milk production (9.69 and 10.08 kg/d) of the two groups, as was the case for fat, protein, lactose, pH and coagulating parameters of the two milks. The milk fat of the experimental group had a significantly higher content of total tocopherols (10.45 vs $8.60{\mu}g/g$, p<0.01) and retinol (3.17 vs $2.54{\mu}g/g$, p<0.01). The content of the reactive substances with tiobarbituric acid (TBARs) was significantly lower in the milk fat of the experimental group (12.09 vs $15.05{\mu}g$ MDA/g, p<0.01). The acid content of the milk fat of the experimental group had a significantly higher content (p<0.05) of C18:0 and of $C18:3{\omega}6$. LC-MS/MS analysis showed the presence of 3,4-DHPEA ($36.0{\mu}g/L$) in the milk of the DSOP-fed buffaloes, while other phenols were not found. DSOP, in the quantity utilized, can be used in the feeding of the lactating buffalo; the dietetic-nutritional characteristics of the milk are improved due to a greater contribution of tocopherols, retinol and the presence of hydroxytyrosol.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.517-525
• /
• 2013

Time-series data of Normal Difference Vegetation Index (NDVI) obtained by the Moderate-resolution Imaging Spectroradiometer(MODIS) satellite imagery gives a waveform that reveals the characteristics of the phenology. The waveform can be decomposed into harmonics of various periods by the Fourier transformation. The resulting $n^{th}$ harmonics represent the amount of NDVI change in a period of a year divided by n. The values of each harmonics or their relative relation have been used to classify the vegetation species and to build a vegetation map. Here, we propose a method to estimate the annual amount of carbon absorbed on the forest from the $1^{st}$ harmonic NDVI value. The $1^{st}$ harmonic value represents the amount of growth of the leaves. By the allometric equation of trees, the growth of leaves can be considered to be proportional to the total amount of carbon absorption. We compared the $1^{st}$ harmonic NDVI values of the 6220 sample points with the reference data of the carbon absorption obtained by the field survey in the forest of South Korea. The $1^{st}$ harmonic values were roughly proportional to the amount of carbon absorption irrespective of the species and ages of the vegetation. The resulting proportionality constant between the carbon absorption and the $1^{st}$ harmonic value was 236 tCO2/5.29ha/year. The total amount of carbon dioxide absorption in the forest of South Korea over the last ten years has been estimated to be about 56 million ton, and this coincides with the previous reports obtained by other methods. Considering that the amount of the carbon absorption becomes a kind of currency like carbon credit, our method is very useful due to its generality.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.359-370
• /
• 2010

The purpose of this study is to test the performance of the recommended summer dressing for office man through the analysis of skin temperature changes by air-conditioning temperature. We tested two clothing combinations; formal wear with necktie and casual shirts without necktie as for Cool mapsi. 4 male subjects sat to stabilize for thirty minutes after entering artificial-climate chamber with both temperature of $25^{\circ}C$, $27^{\circ}C$ and $50{\pm}10%$ R.H. And during 60 minute experiments of simulating office work, the subjective feelings including thermal, humidity and comfort sensation, skin temperature, clothing humidity and sweat amount were measured at the equal intervals. The result is that formal wear of $25^{\circ}C$ and Cool mapsi of $27^{\circ}C$ show good values such as low skin temperature, low clothing humidity and neutral thermal sensation. And Cool mapsi of $25^{\circ}C$ shows the risk of low rectal temperature for long and static energy level of office work. Formal wear of $27^{\circ}C$ shows high values of mean skin temperature, clothing humidity and thermal sensation. Second experiment was to find the ambient temperature when the subject wearing formal wear shows the skin temperature corresponding to which he shows on Cool mapsi of $27^{\circ}C$. The air-conditioning temperature on wearing formal wear has to be $2^{\circ}C$ lower to produce the corresponding skin temperature to which shows on wearing Cool mapsi of $27^{\circ}C$. Therefore it is possible to increase room temperature to $27^{\circ}C$, when wear Cool mapsi for summer office, for skin temperature and thermal sensation are produced the same.