• Proceedings of the Ginseng society Conference
• /
• 1980.09a
• /
• pp.87-113
• /
• 1980

This experiment was carried out to evaluate the effects of Korean ginseng extract on carcinogenesis induced by various chemical carcinogens. Red ginseng extract was used for this study and was administered orally to the experimental animals. Carcinogens that were injected in subscapsular region of ICR newborn mice within 24 hours after birth were 9,10-dimethyl-1,2-benzan-thracene (DMBA), urethane, N-2-fluorenylacetamide(AAF), aflatoxin $B_1$ and tobacco smoke condensate. N -methyl-N -nitroso-N'-nitroguani-dine(MNNG) was injected subcutaneously at the back of wistar rats. Experimental animals were autopsied in immediately after being sacrificed. All major organs were examined grossly and weighted. After fixation histopathological preparations were made for microscopical study. Following results were obtained. In DMBA group sacrificed at the 26th week after the treatment with DMBA, the incidence of lung adenoma was $77\%$ and the average number of the tumor was 17. However, in DMBA combined with red ginseng group, the incidence was $78\%$ and the average number of lung adenoma was 14.1. This indicates that ginseng extract had no effect on the incidence of lung adenoma but decreased the average number of lung adenoma by $17\%.$ In DMBA group sacrificed at the 48th week after the injection of DMBA, the lung adenoma incidence was $88\%.$ The average diameter of the largest lung adenoma was 3.5 cm, the incidence of diffuse pulmonary infiltration was $18\%$ and the average lung weight of male experimental mice was $528.2{\pm}469.1\;gm.$ On the other hand, in DMBA combined with red ginseng group sacrificed at the 48th week, the incidence of lung adenoma was $96\%.$ The average diameter of the largest adenoma was 2.7 cm, the incidence of diffuse pulmonary infiltration was $7\%$ and the average lung weight of male mice was $418.0{\pm}520\;gm.$ These observations show that ginseng extract did not have any inhibitory effect on the incidence of lung adenoma but decreased the average diameter of the largest lung adenoma by $23\%,$ the incidence of duffuse pulmonary infiltration by $63\%$ and the average lung weight of male experimental mice by $21\%.$ From these results we have found that the prolonged administration with ginseng extract showed no inhibitory effect on the incidence of adenoma but it had the inhibitory effect on the proliferation of lung adenomas induced by DMBA. In urethane group sacrificed at the 28th week after the injection of urethane, the incidence of lung adenoma was $94\%$ and the average number of lung adenoma was 8.6. In urethane combined with red ginseng group, the. incidence of lung adenoma was $73\%$ and the average number of adenoma was 6.0. These results indicate that there were $22\%$ decrease of the lung adenoma incidence and $31\%$ decrease of the average number of adenoma in urethane combined with red ginseng group. And in urethane group sacrificed at the 50th week, the incidence of lung adenoma was $98\%$ and the incidence of diffuse pulmonary infiltration was $14\%$. In urethane combined with ginseng group the incidence of lung adenoma was $85\%$ and the incidence of diffuse pulmonary infiltration was $12\%$. Therefore the ginseng administration resulted in $15\%$ decrease of the lung adenoma incidence and $14\%$ decrease of the diffuse pulmonary infiltration incidence. From these results we knew that the prolonged administration with ginseng extract inhibited the incidence and also the proliferation of the lung adenoma induced by urethane. Lung adenoma and hepatoma were induced in the experimental mice sacrificed at the 68th week but not in the experimental mice sacrificed at the 28th week after the injection of AAF. In AAF group sacrificed at the 68th week after the injection of AAF the incidence of lung adenoma was $18\%$ and the incidence of hepatoma was $27\%$. And in AAF combined with ginseng group the lung adenoma incidence was $12\%$ and the hepatoma incidence was $37\%$. So the ginseng seemed to decrease the lung adenoma incidence by AAF, but we were unable to conclude the significant inhibitory effect of the ginseng extract on the incidence of lung adenoma by AAF because the above incidence of lung adenoma were similar to that of control group which was $11\%$. And these experimental data revealed that ginseng extract didn't have any inhibitory effect on the incidence of hepatoma induced by AAF. In aflatoxin $B_1$ group sacrificed at the 56th week, the incidence of lung adenoma was $24\%$ and hepatoma was $11\%$. However in aflatoxin $B_1$ combined with ginseng group the incidence of lung adenoma was $17\%$ and hepatoma was $3\%$ These results indicate that there were $29\%$ decrease of the lung adenoma incidence and $75\%$ decrease of the hepatoma incidence in aflatoxin $B_1$ combined with ginseng group. In tobacco smoke condensate experimental group sacrificed at 67th week, no tumors were induced except just a few lung adenoma. The lung adenoma incidence both in tobacco smoke condensate group and in tobacco smoke condensate combined with ginseng group was $8\%$. And this incidence rate was similar to that of control group. These results indicate that the injection of 320 ug tobacco smoke condensate per ICR newborn mouse was unable to induce lung adenoma in our experiments. In MNNG group sacrificed at the 27th week the tumor incidence was $38.5\%$ and in MNNG combined with ginseng extract group was $37\%$. In MNNG group for investigation of the life span of tumor bearing rats the tumor incidence was $93\%$ and the average life span of tumor bearing rats was 318 days. And in MNNG combined with ginseng extract group the tumor incidence was $96\%$ and the average life span was 337 days. Tumor induced by MNNG was almost sarcoma. This indicates that there was no inhibitory effect of ginseng extract on the tumor incidence, but the extract prolonged the average life span of tumor bearing rats by approximately 19 days.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Journal of Mechanical Science and Technology
• /
• v.17 no.1
• /
• pp.146-156
• /
• 2003

A numerical algorithm is developed to analyze the performance of a Unit-injector (UI) System for a diesel engine. The fundamental theory of the algorithm is based on the continuity equation of fluid dynamics. The loss factors that should be seriously regarded on the continuity equation are the compressibility effect of liquid fuel, the wall friction loss in high-pressure fuel lines of the system, the kinetic energy loss of fuel in the system, and the leakage of fuel out of the control volume. For an evaluation of the developed simulation algorithm, the calculation results are compared with the experimental outputs provided by the Technical Research Center of Doowon Precision Industry Co. (DPICO) ； the maximum pressure in the plunger chamber (P$\_$p/) and total amount of fuel injected into a cylinder per cycle (Q$\_$f/) at each operational condition. The result shows that the average error rate (%) of P$\_$p/ and Q$\_$f/ are 2.90% and 4.87%, respectively, in the specified operational conditions. Hence, it can be concluded that the analytical simulation algorithm developed in this study can be reasonably applied to the performance prediction of newly designed UI system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.2
• /
• pp.79-84
• /
• 2015

Voltage sags are considered the dominant disturbances affecting power quality. Dynamic voltage restorers(DVRs) are mainly used to protect sensitive loads from the electrical network voltage disturbances such as sags or swells and could be used to reduce harmonic distortion of ac voltages. The typical DVR topology essentially contains a PWM inverter with LC Filter, an injection transformer connected between the ac voltage line and the sensitive load, and a DC energy storage device. For injecting series voltage, the PWM inverter is used and the passive filter consist of inductor(L) and capacitor(C) for harmonics elimination of the inverter. However there are voltage pulsation responses by the characteristic of the LC passive filter that eliminate the harmonics of the PWM output waveform of the inverter. Therefore, this paper presented design and feedback performance of LC filter used in the DVRs. The voltage control by LC filter should be connected in the line side since this feedback method allows a relatively faster dynamic response, enabling the elimination of voltage notches or spikes in the beginning and in the end of sags and strong load voltage THD reduction. Illustrative examples are also included.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.97-104
• /
• 2020

One of the main challenges of electrochemical water splitting technology is to develop a high performance, low cost oxygen-evolving electrode capable of substituting a noble metal catalyst, Ir or Ru based catalyst. In this work, CoFe₂O₄ nanoparticles with sub-44 nmsize of a inverse spinel structure for oxygen evolution reaction (OER) were synthesized by the injection of KNO₃ and NaOH solution to a preheated CoSO₄ and Fe(NO₃)₃ solution. The synthesis time of CoFe₂O₄ nanoparticles was controlled to control particle and crystallite size. When the synthesis time was 6 h, CoFe₂O₄ nanoparticles had high conductivity and electrochemical surface area. The overpotential at current denstiy of 10 mA/㎠ and Tafel slope of CoFe₂O₄ (6h) were 395 mV and 52 mV/dec, respectively. In addition, the catalyst showed excellent durability for 18 hours at 10 mA/㎠.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.481-487
• /
• 2009

To control the diameter size of the carbon nanofilaments (CNFs), SF6 was incorporated in the source gases ($C_2H_2/H_2$) during the initial deposition stage. The source gases and $SF_6$ were manipulated as the cyclic on/off modulation of $C_2H_2/H_2/SF_6$ flow in a thermal chemical vapor deposition system. The characteristics of the CNFs formation on the substrate were investigated according to the different cyclic modulation processes and the substrate temperatures. By $SF_6\;+\;H_2$ flow injection during the cycling etching interval time, the diameter size of CNFs was extremely decreased. The cause for the decrease in the diameter size of the individual CNFs by the cyclic on/off modulation process of $C_2H_2/H_2/SF_6$ flow was discussed in association with the slightly enhanced etching ability by the incorporation of $SF_6$.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.268-275
• /
• 1993

A series of parametric investigations are performed in order to resolve the flow characteristic of a Quebec city stoker incinerator. The parameters considered in this study are five internal configurations of the Quebec city stoker itself and its modified ones, primary air velocity, the injection velocity and angle of the secondary air, and the reduction of the stoker exit area. A control-volume based finite-difference method by Patankar together with the power-law scheme is employed for discretization. The resolution of the pressure-velocity coupling is made by the use of SIMPLEC algorithm. The standard, two equation, k-$\varepsilon$ model is incorporated for the closure of turbulence. The size of recirculation region, turbulent viscosity, the mass fraction of the secondary air and pressure drop are calculated in order to analyze the characteristics of flow field. The results are physically acceptable and discussed in detail. The flow field of the Quebec city stoker shows the strong recirculation zone together with the high turbulence intensity over the upper part of the incinerator.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.120-127
• /
• 2007

The purpose of this study is experimentally to analyze that the fuel mass fractions of multi-component mixed fuels have an effect on the characteristics of spray ignition and combustion under the ambient conditions of diesel combustion fields. The characteristics of ignition and combustion were investigated by chemiluminescence images and direct photography. The experiments were conducted in the RCEM(rapid compression expansion machine) with optical access. Multi-component fuels mixed with i-octane, n-dodecane and n-hexadecane are injected in RCEM by the electronic control of common rail injector. Experimental conditions set up 42, 72 and 112 MPa in injection pressure, 700, 800 and 900 K in ambient gas temperature. The results show that the ignition delay was dependent on high cetane number. In case of low ambient temperature, the more low boiling point fuels were mixed, the lower luminance regime had a remarkable effect and also shortened diffusion combustion by increasing heat release rate.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.1
• /
• pp.54-62
• /
• 2015

Small scale paint overspray booths are being operated nationwidely, for repair of passenger car body parts. paint aerosols are emitted from the paint overspray booth in operations. In paint overspray booth operations without ventilation system and air pollutants collection unit, it may land on nearby equipment. In this study a removal of sticky paint aerosol for application of the small-scale overspray paint booth. it's cause the surface of filter bag from generated sticky paint aerosol. To remove adhesion of paint aerosol the agglomerating agents are injected and mixed with sticky paint aerosols prior to reach the filter bag. The paint spray rate was set as $10{\pm}5g/min$ from air-atomized spray guns in the spray booth, injection rate of agglomerating was $10{\pm}5g/min$ in the mixing chamber. The filtration velocity including air pollutants varied from 0.2 m/min to 0.4 m/min. Bag cleaning air pressure was set as $5.0kg_f/min$ for detaching dust cake from surface of filter bag. Bag cleaning interval at the filtration velocity of 0.2 m/min was around 3 times longer than that of the 0.4 m/min. The residual pressure drop maintained highest value at the highest filtration velocity. Fractional efficiency of 99.952%~99.971% was possible to maintain for the particle size of 2.5 microns. Total collection efficiency at the filtration velocity of 0.2 m/min was 99.42%. During this study we could confirm high collection efficiency and long cleaning intervals for the test with filtration velocity of 0.2 m/min indicating an optimal value for the given dimensions of the test unit and test operating conditions.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.104-113
• /
• 2016

This study analyzes correlation between methane gas production and injection of food waste water to motivate to expand renewable energy as a way of GHG (Green House Gas) mitigation to achieve the national GHG target proposed for the climate agreement in Paris last year. Pretreatment of food waste water was processed with pH 6 at $35^{\circ}C$ and used the fixed-bed upflow type reactor with the porous media. As a result of operation of pilot-scaled bioreactor with food waste water, the methane gas production was 6 times higher than the methane gas production of control group with rain water. The average production of methane was $56{\ell}/day/m^3$ which is possible to produce $20m^3$ of methane in $1m^3$ of landfill. As a way of energy source, when it is applied to the landfill over $250,000m^3$, it is also able to achieve financial feasibility along with GHG reduction effect. GHG reductions of $250,000m^3$ scale landfill were assessed by registered CDM project and the annual amount of reductions was 40,000~50,000 $tCO_2e$.