• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.192-192
• /
• 1999

SIMS(Secondary Ion Mass Spectrometry)는 다른 표면 분석장비와 비교하여^g , pp m,^g , pp b 단위의 미량분석이 가능한 장비로서, 특히 depth Profiling을 위한 dynamic SIMS는 Mass Spectrometer의 종류에 따라 Quadrupole SIMS (Q-SIMS)와, Magnetic Sector SIMS (M-SIMS)로 분류된다. 한편, Q-SIMS와 달리 M-SIMS의 경우, Transmission을 높여 주기 위해 Sample Holder에 수 keV의 bias를 걸어 주는데, 이로 인하여 분석 원소에 대한 Sensitivity가 향상되어 지는 반면, RSF의 변화와 같은 분석상의 Artifact가 발생하게 된다. 일반적으로 Q-SIMS의 경우에는 RSF의 RSD(Relative Standard Deviation)가 1%이내에서 보고되고 있지만 M-SIMS에 있어서는 이러한 Deviation이 M-SIMS보다 크게 나타난다. 이 차이는 주로 Sample Holder와 Immersion Lens 사이에 형성되는 Magnetic Field의 왜곡과 Spectrometer의 문제로부터 발생한다. 본 논문에서는 Sample Holder의 종류 및 holder so window 위치에 따라 RSF의 차이를 측정하고 그 data를 RS/1 통계 Package를 이용하여 계량적으로 검증하였으며, 그 차이의 원인과 대책을 제시하고자 한다. 실험에 사용된 Sample은 Si(100) p-type Wafer에 Boron을 이온 주입하여 제작하였다. 이온 주입 장비는 Varian E-500HP이며, 5.0E13 ions/cm2의 dose양을 80keV의 Energy로 각각 7도와 22도의 Tilt와 Twist Angle로 이온 주입을 하였다. SIMS분석에 사용된 Sample Holder는 각각 3 Hole, 9 Hole Type HOlder이며, 분석은 Cameca IMS-6f를 사용하여 B에 대한 Matrix Peak으로 28Si++를 얻었다. 실험 결과 3 Hole Type Sample Holder의 경우 RSF의 RSD는 5.84%, 9Hle Type Sample Holder의 경우는 14.3%로 나타났으나 분석 Window의 위치에 따르는 Grouping을 실시한 결과, 3 Hole Type Sample Holder의 경우 1.2%, 9Hole Type Sample Holder의 경우 9.8%로 RSF의 변화가 감소하였다. 이러한 Deviation은 Sample Holder를 Mount시킬 때 세 개의 Screw를 이용하여 Immersion Lens와의 평형을 잡아주기 때문에 발생하며, 이 Munting을 정확히 해줌으로써 RSF의 변화를 줄일 수 있으나, 실제로 완벽한 Mounting이 불가능하기 때문에 RSF를 일정하게 하기 위해서는 Sample Holder so Window의 취치를 일정하게 설정한 후 분석을 실시해야 한다고 판단된다.

• 한국통신학회논문지
• /
• 제36권10B호
• /
• pp.1200-1209
• /
• 2011

본 논문에서는 수중환경에서의 거리에 따른 전파 손실 특성을 이용한 직교 주파수 분할 다중 접속 방식(Orthogonal Frequency Division Multiple Access, OFDMA) 기반의 새로운 에너지 효율적인 매체 접속 제어(Medium Access Control, MAC) 프로토콜을 제안한다. 제안하는 방식은 센서 노드들을 싱크 노드를 중심으로 싱크 노드와의 거리에 따라 그룹을 나눈 후, 그룹에 서로 다른 주파수 대역을 각각 할당하여 사용하도록 한다. 이러한 방식으로 네트워크 전체의 전송 전력 소모를 줄이고 각 센서 노드에게 최소 허용 신호 대 잡음비 (Accepted Minimum SNR, AMS)를 보장한다. 추가적으로 싱크 노드는 동적 인 부채널 할당 (dynamic sub-channel allocation)으로 데이터 전송률을 향상한다. 모의실험을 통해 제안하는 매체 접속 제어 프로토콜의 수중 센서 네트워크에서의 성능을 확인할 수 있었다.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.631-637
• /
• 2018

5G 이동통신에서는 이동성 관리를 필요로 하지 않거나 제한된 이동성 관리만을 필요로 하는 단말에 대하여 차별적으로 이동성을 제공할 수 있어야 한다. 본 논문에서는 이동 수준이 유사한 다수의 MTC 단말을 c-MTC와 m-MTC 그룹으로 분류하는 2계층 이동성 관리시스템을 제안한다. Tracking Area Update (TAU)를 수행할 때 발생하는 제어신호의 수를 줄여 에너지 효율 및 서비스 수명을 향상시키기 위해 그룹 헤더가 대표적으로 TAU Request를 수행하도록 하며 이동 수준에 따라 주기적인 TAU 갱신 주기를 조절하였다. m-MTC의 TAU 갱신주기는 3GPP 표준에서 제안하는 기본값인 54분으로 설정하였으며, c-MTC는 이 보다 짧은 주기를 갖는 것으로 하여 12분으로 설정하였다. 단말들이 개별적으로 TAU를 실행할 때와 비교해 보면, m-MTC 또는 c-MTC 그룹에서 MME가 변경되지 않는 경우 33% 그리고 MME가 변경되지 않는 경우는 49% 정도 제어신호의 수가 감소함을 알 수 있었다.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 한국가금학회지
• /
• 제6권2호
• /
• pp.91-102
• /
• 1979

The basic problem of the broiler industry is that of fluctuating prices, mainly thanks to unstable supply of and inelastic demand for products as usually indicated as a peculiarity of agricultural commodities. This particularly brings the producer to a great economic risk, because he has to sell products under the condition of pure competition, whereas others from whom he has to buy deal under the condition of oligopoly or even monopoly. Therefore, producers economic position is generally placed in the worst comparing others dealing with, which results in unbalanced economic status of elements involved in broiler operation and further obstruction of industry development as a whole. A certain type of business coordination to overcome such a problem should be measured in order to improve the efficiency of entire operation and thus assure the balanced industry development. The concept of the economic integration developed in modern business system had been adapted to U.S. poultry industry which became common later around the world as a means of stabilizing producers price and whole industry as well. There are two main typos of integration; horizontal and vertical The former refers to the general grouping of similar business units, eg. a hatchery tying with other hatchery, while the latter refers to the knitting together of two or more stages of economic activities, eg. tying together among units of hatching, fled milling, production, processing and marketing. By having the industry integrated, risk and uncertainty involved in various stages of operation could be diversified. The typo of integrating contract between producers and integrators include the share of profits, flat fee payment, feed conversion payment and salary basis. In the U.S., extensive changes in production, processing, and marketing during the last few decades have changed the thicken broiler industry from one of small, widely scattered farms to one that is largo, concentrated and efficient. More than 99 percent of all broilers produced are grown under contract and by integrated firms which vary in size of operation and complexity. About 84 percent of all production is concentrated in 10 States. Some of the other factors ;hat contributed to these choses arc costs, energy use, prices, processing, marketing and demand. No integrated broiler production system has yet been applied in Korea's poultry industry, thus all stages all broiler operation run independently seeking for its own profit. Consequently, producers price fluctuate very widely around the year even more than 50 percent in a few months. This also leads to disadvantages of material supplies, processors and distributors and enforce the industry unstable. The current economic environment in Korea seems that the time for broiler integration comes and as an ideal integrator, feed millers, food processors and producers group may be considered.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권7호
• /
• pp.957-966
• /
• 2017

Objective: To understand the dynamic structure, function, and influence on nutrient metabolism in hosts, it was crucial to assess the genetic potential of gut microbial community in yaks of different ages. Methods: The denaturing gradient gel electrophoresis (DGGE) profiles and Illumina-based metagenomic sequencing on colon contents of 15 semi-domestic yaks were investigated. Unweighted pairwise grouping method with mathematical averages (UPGMA) clustering and principal component analysis (PCA) were used to analyze the DGGE fingerprint. The Illumina sequences were assembled, predicted to genes and functionally annotated, and then classified by querying protein sequences of the genes against the Kyoto encyclopedia of genes and genomes (KEGG) database. Results: Metagenomic sequencing showed that more than 85% of ribosomal RNA (rRNA) gene sequences belonged to the phylum Firmicutes and Bacteroidetes, indicating that the family Ruminococcaceae (46.5%), Rikenellaceae (11.3%), Lachnospiraceae (10.0%), and Bacteroidaceae (6.3%) were dominant gut microbes. Over 50% of non-rRNA gene sequences represented the metabolic pathways of amino acids (14.4%), proteins (12.3%), sugars (11.9%), nucleotides (6.8%), lipids (1.7%), xenobiotics (1.4%), coenzymes, and vitamins (3.6%). Gene functional classification showed that most of enzyme-coding genes were related to cellulose digestion and amino acids metabolic pathways. Conclusion: Yaks' age had a substantial effect on gut microbial composition. Comparative metagenomics of gut microbiota in 0.5-, 1.5-, and 2.5-year-old yaks revealed that the abundance of the class Clostridia, Bacteroidia, and Lentisphaeria, as well as the phylum Firmicutes, Bacteroidetes, Lentisphaerae, Tenericutes, and Cyanobacteria, varied more greatly during yaks' growth, especially in young animals (0.5 and 1.5 years old). Gut microbes, including Bacteroides, Clostridium, and Lentisphaeria, make a contribution to the energy metabolism and synthesis of amino acid, which are essential to the normal growth of yaks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권7호
• /
• pp.1951-1975
• /
• 2023

Recent advances in Cognitive Radio Networks (CRN) have elevated them to the status of a critical instrument for overcoming spectrum limits and achieving severe future wireless communication requirements. Collaborative spectrum sensing is presented for efficient channel selection because spectrum sensing is an essential part of CRNs. This study presents an innovative cooperative spectrum sensing (CSS) model that is built on the Firefly Algorithm (FA), as well as machine learning artificial neural networks (ANN). This system makes use of user grouping strategies to improve detection performance dramatically while lowering collaboration costs. Cooperative sensing wasn't used until after cognitive radio users had been correctly identified using energy data samples and an ANN model. Cooperative sensing strategies produce a user base that is either secure, requires less effort, or is faultless. The suggested method's purpose is to choose the best transmission channel. Clustering is utilized by the suggested ANN-FA model to reduce spectrum sensing inaccuracy. The transmission channel that has the highest weight is chosen by employing the method that has been provided for computing channel weight. The proposed ANN-FA model computes channel weight based on three sets of input parameters: PU utilization, CR count, and channel capacity. Using an improved evolutionary algorithm, the key principles of the ANN-FA scheme are optimized to boost the overall efficiency of the CRN channel selection technique. This study proposes the Artificial Neural Network with Firefly Algorithm (ANN-FA) for cognitive radio networks to overcome the obstacles. This proposed work focuses primarily on sensing the optimal secondary user channel and reducing the spectrum handoff delay in wireless networks. Several benchmark functions are utilized We analyze the efficacy of this innovative strategy by evaluating its performance. The performance of ANN-FA is 22.72 percent more robust and effective than that of the other metaheuristic algorithm, according to experimental findings. The proposed ANN-FA model is simulated using the NS2 simulator, The results are evaluated in terms of average interference ratio, spectrum opportunity utilization, three metrics are measured: packet delivery ratio (PDR), end-to-end delay, and end-to-average throughput for a variety of different CRs found in the network.

• 설비공학논문집
• /
• 제20권12호
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• 동아시아식생활학회지
• /
• 제12권5호
• /
• pp.352-363
• /
• 2002

The purpose of this study was to analyze health-related habits, weight control experience and body composition of 344 female students visiting nutrition counselling office. Dietary habits of the subjects were assessed by means of interview with questionnaire and nutrient intakes were evaluated by the simple dietary assessment method. Weight and height were measured to get body mass index(BMI) and waist-hip ratio and their body composition were measured by Inbody 3.0. The obtained results were as follows: 1) Among students, 14.5% were exercising on a regularly basis, of which the exercises were walking and gymnastic exercise(22.1%), jogging(14.1%), and rope-skipping(4.7%), 48.4% of students were little drinking and 30.5% were once a week and smokers were 4.1%. 2) 28.3% of students were little having breakfast and 15.1% were once or twice a week. Two third of total students were not having breakfast regularly. Also only 59.6% of students were having dinner everyday, which means many of them were even skipping dinner. The reasons why they were not having breakfast were because they don't have enough time to eat(66.0%) and for a diet(2.8%) and the reasons for skipping dinner were because they were not hungry(23.0%), for the weight loss(18.2%). It was shown that they would skip dinner rather than breakfast for a weight control. 51.6% of students were taking snack 1~2 times a day and 5.3% were having little snack. 55.4% of students were dining out once a day and 15.4% more am 2 times a day. 3) 46.7% of students were already experiencing weight control before visiting the counselling office. 78.5% of students tried on one kind of weight control method, 11.4% on two kinds, and 10.1 % on more than three kinds. The method they tried for a weight control most was the one food diet using egg, fruits and beans, which is the most popular among them, and the next were an aerobic exercise(23.6%). a diet tried by a famous entertainer (15.5%), and the fasting(14.5%). 4) The average BMI was 21.2 and the body fat rate was 28.1%. As a result of grouping BMI, 12.8% were underweight 67.6% normal weight 11.6% overweight and 8% obesity. Less than standard for the body fat rate were 0.6%, 50.6% standard, 48.5% more than standard. 49.2% of students as normal weight on a BMI were assessed the so-called "skinny obesity. 50% of consulted students situated fat intra-abdominally at the umbilical level(WHR>0.8). 5) The energy intake was 76.6$\pm$17.8% of RDA and constituent ratio of carbohydrate, fat and protein were 64.2$\pm$5.2%, 21.6$\pm$3.7% and 14.3$\pm$2.3%, respectively, which is little over of 20% of recommended ratio of fat. Protein and niacin intake were more than 90% of RDA and riboflavin and vit. C were taken more than 100% of RDA. But Fe intake was 69.4$\pm$19.3%, Ca 76.6$\pm$23.6%, which were the least constituents. There was not remarkable significance between energy intake and nutrient density based on the groups of underweight, normal weight, overweight and obesity of BMI. 6) It was shown that body fat rate had remarkably significant correlation(p<0.000) with BMI(r=0.760) and WHR(r=0.817) respectively, but body fat rate was more correlated with WHR than with BMI. There was not much significant difference between body fat rate and WHR whether they exercised or not. However. BMI was significantly higher in the exercise group because one who showed higher BMI started to exercise since they looked fat in appearance and perceived as they were fat. fat.