• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1277-1282
• /
• 2016

In the next generation wireless communication systems, an energy harvesting from radio frequency signals is considered as a method to solve the lack of power supply problem for sensors. In this paper, we try to propose an efficient algorithm for simultaneous wireless information and power transfer in energy harvesting networks with channel estimation error. At first, we find an optimal channel training interval using one-dimensional exhaustive search, and estimate a channel using MMSE channel estimator. Based on the estimated channel, we propose a power allocation and splitting algorithm for maximizing the data rate while guaranteeing the minimum required harvested energy constraint, The simulation results confirm that the proposed algorithm has an insignificant performance degradation less than 10%, compared with the optimal scheme which assumes a perfect channel estimation, but it can improve the data rate by more than 20%, compared to the conventional scheme.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.885-897
• /
• 2009

In order to make sure the impact of spatial resolution of wind energy map on the estimation of wind power density in the Korean Peninsula, the comparison studies on the characteristics of wind energy map with three different spatial resolutions were carried out. Numerical model used in the establishment of wind map is MM5 (5th generation Mesoscale Model) with RBAPS (Regional Data Assimilation and Prediction System) as initial and boundary data. Analyzed Period are four months (March, August, October, and December), which are representative of four seasons. Since high spatial resolution of wind map make the undulation of topography be clear, wind pattern in high resolution wind map is correspond well with topography pattern and maximum value of wind speed is also increase. Indication of island and mountains in wind energy map depends on the its spatial resolution, so wind patterns in Heuksan island and Jiri mountains are clearly different in high and low resolutions. And area averaged power density can be changed by estimation method of wind speed for unit area in the numerical model and by treatment of air density. Therefore the studiable resolution for the topography should be evaluated and set before the estimation of wind resources in the Korean Peninsula.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.18-25
• /
• 2007

In sensor networks, sensor nodes have limited computational capacity, power and memory. Thus energy efficiency is one of the most important requirements. How to extend the lifetime of wireless sensor networks has been widely discussed in recent years. However, one of the most effective approaches to cope with power conservation, network scalability, and load balancing is clustering technique. The function of a cluster head is to collect and route messages of all the nodes within its cluster. Cluster heads must be changed periodically for low energy consumption and load distribution. In this paper, we propose an energy-aware cluster head selection algorithm and Distance Estimation-based distributed Clustering Algorithm (DECA) in wireless sensor networks, which exchanges cluster heads for less energy consumption by distance estimation. Our simulation result shows that DECA can improve the system lifetime of sensor networks up to three times compared to the conventional scheme.

• Journal of Environmental Policy
• /
• v.11 no.2
• /
• pp.55-71
• /
• 2012

This paper attempts to estimate the energy price elasticity of per capita $CO_2$ emissions, which helps to understand the influence of recent energy price increase on the natural reduction of $CO_2$ emissions. For this purpose, this study researched panel data of twenty-nine OECD countries from 1978 to 2009 and adopted estimation models for testing the environmental Kuznets hypothesis. Estimation results show that the 1% increase of energy price index will cause a statistically significant decrease of per capita $CO_2$ emissions by 0.26 ~ 0.31%, which is substantial enough for policy consideration. Also Kuznet curves in estimation models were identifed, the turning points of income lie between 22.2~48.5 thousand US dollars, depending on model specifications.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.40-48
• /
• 2018

This paper presents a simulation-based design reliability estimation method of a low-energy exploding foil initiator (LEEFI) using a meta-model and describes the design reliability estimation results. The flyer velocity of the LEEFI is critical to initiate the explosive. Evaluation of the flyer velocity from mechanistic models in open literature requires a long computation time due to the multi-physical phenomena that generate the velocity. Moreover, the higher levels of confidence required for an initiator with high reliability incur higher computation costs. Thus, a meta-model of the flyer velocity over time was constructed in order to increase the computational efficiency for a reliable estimation. For different distributions and sigma levels of the design variables, the design reliability estimation results using the meta-model are provided. Additionally, the computational efficiency and accuracy of the estimation method are analyzed.

• Smart Structures and Systems
• /
• v.7 no.5
• /
• pp.379-392
• /
• 2011

This paper presents a multi-functional system, consisting of a magnetorheological (MR) damper and an electromagnetic induction (EMI) device, and its applications in stay cables. The proposed system is capable of offering multiple functions: (1) mitigating excessive vibrations of cables, (2) estimating cable tension, and (3) harvesting energy for wireless sensors used health monitoring of cable-stayed bridges. In the proposed system, the EMI device, consisting of permanent magnets and a solenoid coil, can converts vibration energy into electrical energy (i.e., induced emf); hence, it acts as an energy harvesting system. Moreover, the cable tension can be estimated by using the emf signals obtained from the EMI device. In addition, the MR damper, whose damping property is controlled by the harvested energy from the EMI device, can effectively reduce excessive cable vibrations. In this study, the multi-functionality of the proposed system is experimentally evaluated by conducting a shaking table test as well as a full-scale stay cable in a laboratory setting. In the shaking table experiment, the energy harvesting capability of the EMI device for wireless sensor nodes is investigated. The performance on the cable tension estimation and the vibration mitigation are evaluated using the full-scale cable test setup. The test results show that the proposed system can sufficiently generate and store the electricity for operating a wireless sensor node twice per day, significantly alleviate vibration of a stay cable (by providing about 20% larger damping compared to the passive optimal case), and estimate the cable tension accurately within a 2.5% error.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.57-67
• /
• 2003

This study aims to presents Evaluation Method of Green Remodeling that analyze the value of environment through expense, using the method of life cycle cost and life cycle assessment simultaneously. The results of this study are summarized as follows. Evaluation Model developed in this study can convert economical value of environment into cost by integrating. In addition, the model can apply as a useful tool to estimation of economical design alternative as well as quantification of environmental loads and costs. Evaluation Model presented In this study observe energy consumption and the environmental load emission with qualification, it can forecast effect of environmental cost that cost estimation is expected to be added to energy cost rate by being possible. Synthetically, when Estimation Model and computer program that developed in this study is applies to the construction industry; reasonable management of environmental load is convenient at each step of Green Remodeling. In addition, at preliminary design phase, practical use may be possible by reasonable yardstick about various alternatives and improvement of design alternatives likewise by grasping environmental effect.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.324-329
• /
• 2018

As the environment of power systems changes, the demand and necessity for new electrical energy market are increasing. Especially, efforts to increase the efficiency of electric energy use by using demand response programs are being studied constantly in advanced countries and it is operated as a real market. This paper presents a study on the baseline load estimation required in the new power market, such as demand response, P2P electricity trading etc. The proposed method estimates the baeline load through analysis of the load pattern and verifies the effectiveness of the proposed method using actual data.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.327-330
• /
• 2016

Currently, the world's elderly population continues to grow at a dramatic rate. As the number of senior citizens increases, detection of someone falling has attracted increasing attention for visual surveillance systems. This paper presents a novel fall-detection algorithm using motion estimation and an integrated spatiotemporal energy map of the object region. The proposed method first extracts a human region using a background subtraction method. Next, we applied an optical flow algorithm to estimate motion vectors, and an energy map is generated by accumulating the detected human region for a certain period of time. We can then detect a fall using k-nearest neighbor (kNN) classification with the previously estimated motion information and energy map. The experimental results show that the proposed algorithm can effectively detect someone falling in any direction, including at an angle parallel to the camera's optical axis.

• Smart Structures and Systems
• /
• v.12 no.3_4
• /
• pp.441-463
• /
• 2013

In this paper, a simplified planar model is developed for damage estimation of interlocked caisson systems. Firstly, a conceptual dynamic model of the interlocked caisson system is designed on the basis of the characteristics of existing harbor caisson structures. A mass-spring-dashpot model allowing only the sway motion is formulated. To represent the condition of interlocking mechanisms, each caisson unit is connected to adjacent ones via springs and dashpots. Secondly, the accuracy of the planar model's vibration analysis is numerically evaluated on a 3-D FE model of the interlocked caisson system. Finally, the simplified planar model is employed for damage estimation in the interlocked caisson system. For localizing damaged caissons, a damage detection method based on modal strain energy is formulated for the caisson system.