• Journal of Venture Innovation
• /
• v.3 no.1
• /
• pp.165-182
• /
• 2020

This research shows solutions for relieving the reversibility of the VAT system, and the solutions will be reviewed with current issues about supporting welfare. The Followings provide practical implementing solutions for each issue. Since the VAT is taxed for all goods and services as a general consumption tax, it is efficient tax policy for resource allocation comparing to income tax. On the other hand, because of the reversibility of the tax burden is also treated as a non-effective tax system for fair taxation. Even it is a non-effective tax system, the VAT system takes the most portion from the total national tax. In South Korea economic system, it is hard to raise the VAT rate because the economic effects are tremendous. For the long-term, the possibility of increasing the VAT rate is unavoidable, considering the economy, society, environment and energy, and aging. Therefore, a variety of substituted policies for the reversibility should be covered once there is a conference for the increase in the VAT rate. This research provides foundational solutions by acknowledging the reversibility of the tax burden in terms of the effective value-added tax rate. The followings are four solutions. First, it is required to adjust the duty-free system for relieving the reversibility and expand the tax-free system as well as individual consumption tax items. Second, The relief of reversibility should be worked by imposing higher the tax rate for high-income people' goods and services. Third, the adjustment of the duty-free system could be considered due to relieve the reversibility of the VAT. Last, it is considered to adjust of the simplified taxation system because the simplified taxation system is seriously against the tax-transfer principles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.683-691
• /
• 2015

Circulating Fluidized Bed(CFB) combustion has the several advantages which are the fuel flexibility, the economy, the efficiency and the environment. It is necessary to apply a renewable energy to produce electricity due to the Renewable Portfolio Standard(RPS) mandates recently. So, in this study, co-combustion with a coal and a wood pellet was investigated to evaluate the combustibility and the environment as function of blending ratio of them in a Lab-scale CFB reactor. To investigate the characteristics of the co-combustion, the blending ratio which is the weight of wood pellet by the total calorific value of the supplied, was considered. Bed material was a river sand(No. 7). As increasing the blending ratio, the exhausted gas emissions such as CO, NOx, HC and SOx were decreased. But in case of wood pellet over 30%, CO, HC and SOx emission were increased. And the gas temperatures at the downstream were decreased.

• Journal of Korea Game Society
• /
• v.4 no.1
• /
• pp.41-49
• /
• 2004

Domestic On-line game market becomes keen competition gradually. So, work which advance into the new market is very important work which it takes future of Korean on-line industry. Recently, Chinese on-line game population is soaring by development of on-line infrastructure and elevation of the Intern et speed. Also, growth of China economy improved purchasing power. So, international market is desiring China market. Because China on-line game market has High potential energy, no one is opposed to truth that China market's advance gives opportunity of great success. So, this China market's charm advanced many domestic companies to China market. Also, many domestic companies are preparing for China advance. However, we did not understand perfectly circumstance of China market, and advanced impatiently without thorough preparation. So, occasion that the latest domestic companies fail greatly is increasing. Finally, we can know that China market's advance is difficulty. Therefore, we must analyze circumstance of China game market systematically, and do thoroughpreparation and preparatory audit that is enough with wider visual field. So, we must think investment about the future more than that think in a short time profit.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.629-636
• /
• 1996

The developments of mariculture fisheries depend on both the natural environmental inputs such as sun, rain, wind, tide and the economic inputs such as ships, fuels, facilities, labor. for the enhancement of mariculture productivity in Deukryang Bay, a new attempt has been made to connect the environmental resources and the economic activity within one system. This study applies EMERGY analysis that evaluates environmental energies, fuels, goods and services in terms of solar emjoelus. In total EMERGY use $(69.65\times10^{20}\;sej/yr)$ the natural environment inputs is $78\%\;(54.60\times10^{20}\;sej/yr)$. This means that the mariculture in Deukryang Bay depends on mainly environmental resources. Net EMERGY yield ratio was 4.63 which indicated high value as a resource, EMERGY investment ratio was 0.28 that means to gain 3.6 times energy from the natural environment than those of economy. If the fisherie's products are made by renewable EMERGY input to Deukryang Bay, the calculated carrying capacity of fishes, crustaceans, shellfish and seaweeds were 1,140, 110, 1,553 and 9,074 ton/yr, respectively. If the quantity of renewable EMERGY input to mariculture grounds in Deukrysng Bay was calculated-based on only shellfish product, shellfish products was estimated as about 1,195 ton/yr.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.744-754
• /
• 2017

In this study, an analytic hierarchy process (AHP) was conducted with the aim of developing a post-disaster refugee housing performance index system (PPS) to improve the post-disaster refugee housing (PRH) performance criteria for the foundation of quality-based development. The PRH was defined as a mid-term temporary housing facility that is used for a certain period before the permanent housing is established. The safety, rapidity, reusability, habitability, and economy were derived from major performance factors through prior research. A hierarchical PPS was organized by linking the major performance factors with the whole life cycle process of PRH. The priority of each performance index of PPS was determined quantitatively using the analytic hierarchy process through an expert survey. Based on AHP analysis, the performance criterion of the total weight 1-10 ranking and the performance criterion of the first rank in each category were classified into the essential performance criterion (must be achieved) and the others were classified into the recommended performance criterion (optional achieved) and the performance index was constructed considering all stages of PRH development. With the completion of the PRH performance index, it is expected that victims will be able to secure stable residence and return to their daily lives quickly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.474-481
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.

• Environmental and Resource Economics Review
• /
• v.23 no.1
• /
• pp.133-156
• /
• 2014

In general, quantity results of empirical analysis using model shows how much big performance policy has. Therefore this is useful to evaluate a policy. This paper composed macro economic model based on Bank of Korea's quarterly model and annual model, that estimates performance of overseas oil and gas development project to Korean economy in aspect of quantity. In this model, we estimated each effect in real GDP, current account, unemployment rate, CPI and exchange rate carried by recovered amount from overseas oil and gas development project. The recovered amount was evaluated in currency coming from oil and gas acquired from overseas oil and gas development project. Macro economic model of this paper benchmarked macro model composed by Bank of Korea(1997, 2004, 2012). We reviewed model robustness using statistical suitability of each equation and historical simulation for from 1994 to 2011. The recovered amount of overseas oil and gas development project has positive effect in every macro economic index except CPI and exchange rate. Economic effect to macro economic index become bigger with time because the recovered amount of overseas oil and gas development project are increasing until now. Although empirical results of economic effects in every year from the recovered amount of overseas oil and gas development project are different, as of 2011, empirical results showed that the recovered amount of overseas oil and gas development project increase 2.226% and 0.401% in current account and real GDP respectively. And it also decrease 0.489%p in unemployment rate. Exchange rate to US dollars also decrease in amount of 0.379%.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.47-56
• /
• 2011

Korea Ministry of Knowledge Economy has estimated that wind power (WP) will be occupied 37% in 2020 and 42% in 2030 of the new energy sources, and also green energies such as photovoltaic (PV) and WP are expected to be interconnected with the distribution system because of Renewable Portfolio Standard (RPS) starting from 2012. However, when a large scale wind power plant (over 3[MW]) is connected to the traditional distribution system, protective devices (mainly OCR and OCGR of re-closer) will be occurred mal-function problems due to changed fault currents it be caused by Wye-grounded/Delta winding of interconnection transformer and %impedance of WP's turbine. Therefore, when Double-Fed Induction Generator (DFIG) of typical WP's Generator is connected into distribution system, this paper deals with analysis three-phase short, line to line short and a single line ground faults current by using the symmetrical components of fault analysis and PSCAD/EMTDC modeling.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.99-104
• /
• 2008

It is important to understand thermal characteristic as a method to estimate the new materials, because spontaneous ignition characterized by causing combustion in the low temperature without ignition source. If can not find out the thermal characteristics of materials, it is frequent that causes of fires could not be found. The danger level of spontaneous ignition material should be estimated and by closely studying its thermal characteristic. However, RPF(Refuse Paper & Plastic Fuel) is a solid matter and getting increasesa year by year because it is an economy profit as alternative energy for limited fossil fuels. Some time RPF occur a fire in the cases of its production process and conservation. Therefore study for thermal stability and critical ignition temperature of RPF was so imperative that the experiment by means of Bombe Calorimeter, TG-DTA, MS80, SIT-II, and Wire Basket Test was implemented. As a result, RPF had a caloric value 26.4-28.3 MJ/kg, and its initial pyrolysis temperature was $192^{\circ}C$ at heating rate 2 K/min. With the result of analysis by MS 80 which is an instrument measuring microscopic calory, pure RPF not containing water has higher caloric value than RPF containing 20% water. Also, SIT-II which is an instrument of insulated auto-ignition was ignited by $118.5^{\circ}C$. This temperature is lower than that of Wire Basket Test. The critical ignition temperature was calculated by Frank-Kamenetskii equation can cause ignition at $80^{\circ}C$ when conserved in the height of 10 m by the standard of infinity slab.