• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.101-108
• /
• 2017

A wireless image sensor node collecting image data for environmental monitoring or surveillance requires a large amount of energy to transmit the huge amount of video data. Even though solar energy can be used to overcome the energy constraint, since the collected energy is also limited, an efficient energy management scheme for transmitting a large amount of video data is needed. In this paper, we propose a method to reduce the number of blackout nodes and increase the amount of gathered data by selecting an appropriate video coding method according to the energy condition of the node in a solar-powered wireless video sensor network. This scheme allocates the amount of energy that can be used over time in order to seamlessly collect data regardless of night or day, and selects a high compression coding method when the allocated energy is large and a low compression coding when the quota is low. Thereby, it reduces the blackout of the relay node and increases the amount of data obtained at the sink node by allowing the data to be transmitted continuously. Also, if the energy is lower than operating normaly, the frame rate is adjusted to prevent the energy exhaustion of nodes. Simulation results show that the proposed scheme suppresses the energy exhaustion of the relay node and collects more data than other schemes.

• 한국태양에너지학회 논문집
• /
• 제30권2호
• /
• pp.81-86
• /
• 2010

Since the solar energy resource is the main input for sizing any solar photovoltaic system and solar thermal power system, it is essential to utilize the solar radiation data as a application and development of solar energy system increase. It will be necessary to understand and evaluate the insolation data. The Korea Institute of Energy Research(KIER) has begun collecting horizontal global insolation data since May, 1982 and direct normal insolation data since December 1992 at 16 different locations in Korea. Because of a poor reliability of existing data, KIER's new data will be extensively used by solar energy system users as well as by research institutes. From the results, the yearly averaged horizontal global insolation was turned out 3.60kWh/$m^2$/day and a significant difference of horizontal global insolation is observed between 1982~1990 and 1991~1999, 2000~2008 through 16 different cities in Korea.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.337-340
• /
• 2008

As a 'Construction of Information System on GIS based and Resource Map', establish the strategic of design about construction of Spatial Data Warehouse for New & Renewable Energy For Construction of comfortable Spatial Data Warehouse, It suggested The Construction of Spatial Data Warehouse on Block(Grid) Based with Analyze into the old Data & Method of Study. For Decide the Block(Grid) Size, We need The Study of Data & Method. Also, we expect Standardize The Process of Change & Apply with Data. make the best use of New & Renewable Energy Part

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.119-120
• /
• 2005

• 정보과학회 논문지
• /
• 제42권12호
• /
• pp.1495-1502
• /
• 2015

센서 네트워크에서 압축은 종단 간 지연시간과 에너지 사용량 사이의 이율배반적인 관계가 있다. 데이터의 크기를 줄이기 위해 압축을 하면, 추가적인 지연시간과 에너지 소비가 발생하지만, 전송으로 인한 에너지 소모는 감소하게 된다. 일반적으로, 배터리기반 센서 네트워크에서는 지연시간을 손해 보더라도 네트워크의 생존시간을 최대화하기위해 압축을 널리 사용하고 있다. 한편 태양 에너지 기반 센서 네트워크에서는 주기적으로 에너지 재생산이 이루어짐에 따라, 동작하는데 충분한 에너지양 이상의 에너지가 존재할 가능성이 있다. 본 논문에서는 여분의 에너지를 사용해 종단 간 지연시간을 감소시키는 에너지 적응형 선택적 압축 기법을 제안한다. 제안하는 기법은 노드의 에너지가 충분하지 않을 때, 에너지 소비를 줄이기 위해 압축을 사용하고, 에너지가 충분한 경우에는 종단 간 지연시간 감소를 위해 압축을 사용하지 않는다. 시뮬레이션을 통한 에너지와 지연시간의 성능평가를 통하여 제안하는 기법의 우수성을 증명하였다.

• Nuclear Engineering and Technology
• /
• 제38권8호
• /
• pp.803-808
• /
• 2006

The neutron induced nuclear cross section data for Ir-191 and Ir-193 were calculated and evaluated from unresolved resonance energy to 20MeV. The energy-dependent optical model potential parameters were determined based on the experimental data and applied up to 20MeV. A spherical optical model, a statistical model in an equilibrium energy region, and a multistep direct and multistep compound model in a pre-equilibrium energy region were used in the calculations. The direct capture model enhanced the fast neutron capture in the pre-equilibrium energy. The theoretically calculated cross sections were compared with the experimental data and the evaluated files. The calculations were found to be in good agreement with the experiment data. The evaluated cross section results were compiled with the ENDF-6 format. The fast energy results will be merged with the resonance parts to create a full evaluation library. The improvement of the neutron-induced cross section data will contribute to an increase in the efficiency of the production of Ir-192 as a radiation source.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.41-50
• /
• 2021

The purpose of this study is to analyze various energy platforms using data in the US and to suggest directions and implications. Some of the leading energy platforms are selected and analyzed based on the opening platform model. We focus on the case analysis of the US utility companies. In case of the horizontal open platform, Green Button sponsor's 'Connect My Data (CMD)' driven by the government invites the utility companies to jointly develop the sponsor's data solution. In case of the vertical open platform, the certification program 'Share My Data (SMD)' allows backward compatibility, because the technical improvement is minimal. The utility companies benchmark Amazon's three-sided market mediation and prefer platform and category exclusivity. For the former, they have data analytics companies like Enervee, Opower and for the latter, they have electronics manufactures and energy service providers (ESPs) like Distributed Energy Resources (DERs). Based on this US case study, we suggest the energy platforms to open their platform for renewable energy supply, energy conservation, high-efficiency products, and residential DER dissemination. To successfully implement the government's energy transition policy, the US platforms should be benchmarked as a business model. Especially, it is needed for them to coordinate a platform ecosystem. To ensure trust in the products and services offered on the marketplace platform, platform's certification program is helpful.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.243-246
• /
• 2009

To evaluate the building energy performance, many building simulation programs are used and its capabilities are developed. Despite of its increased capabilities the weather data used In the Building Energy performance evaluation, are still using the same limited set of data. This often forces users to find or calculate weather data such as illuminance, solar radiation, and ground temperature from other sources to calculate it. Also, proper selection of a right weather data set has been considered as one of important factors for a successful building energy simulation. In this paper, we describe TMY2 data, a generalized weather data format developed for use, and applied to Seoul region and examine the differences comparing to existing weather data. A set of 23 years raw weather data base has been developed to provide the weather data file for building energy analysis in Seoul.

• 전기학회논문지P
• /
• 제64권2호
• /
• pp.85-91
• /
• 2015

With the increasing popularity of Smart Grid infrastructure, it is much easier to collect energy usage data using AMI (Advanced Measuring Instrument) from residential housing, buildings and factories. Several researches have been done to improve an energy efficiency by analyzing the collected energy usage data. However, it is not easy to store and analyze the energy data using a traditional relational database management system since the data size grows exponentially with an increasing popularity of Smart grid infrastructure. In this paper, we are proposing a Hadoop based Big data system to store and analyze energy usage data. Based on our limited experiments, Hadoop based energy data analysis is three times faster than that of a relational database management system based approach with the current system.

• 한국태양에너지학회 논문집
• /
• 제40권3호
• /
• pp.33-42
• /
• 2020

Operational energy is the energy that is used during the occupancy stage of building life cycle. It is associated with relatively longer proportion of infrastructure's service life and can constitute 80-90% of the total energy. Assessing the energy use in buildings is essential since they are significant contributors to energy demand. In this regard, energy performance of buildings has become the focus of many regulations. This paper aimed to review the regulations about the energy performance of buildings during their operational stage in Korea. For energy efficient operation program for existing buildings, governments should implement policies and support voluntary programs that rely on collecting and managing building performance data and using this data to inform public and private-sector operation and maintenance strategies. Implementing these policies and programs requires tools and processes for collecting, curating, managing, analyzing, and publishing this data. Energy assessment tool, that is a data resource management tool that enables to assess energy use across the entire portfolio of buildings, is also required.