• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1067-1070
• /
• 2009

We studied change in water contact angle on $TiO_2$ surfaces upon high-energy electron-beam treatment. Depending on conditions of e-beam exposures, surface OH-content could be increased or decreased. In contrast, water contact angle continuously decreased with increasing e-beam exposure and energy, i.e. change in the water contact angle cannot be rationalized in terms of the overall change in the surfacestructure of carbon-contaminated $TiO_2$. In the C 1s spectra, we found that the C-O and C=O contents gradually increased with increasing e-beam energy, suggesting that the change in the surface structure of carbon layers can be important for understanding of the wettability change. Our results imply that the degree of oxidation of carbon impurity layers on oxide surfaces should be considered, in order to fully understand the change in the oxide surface wettability.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.485-488
• /
• 2006

In order to investigate the possibility of waste mushroom logs as biomass resource chemical and physical characteristics of normal woods and waste mushroom logs such as crystallinity value, energy consumption, total sugar yield after hydrolysis chemical compounds and molecular weight distribution after acid hydrolysis, were examined. In the results, crystallinity of waste mushroom logs which were three year passed after the inoculation was decreased drastically from 49% to 33% during the cultivation. Lignin contents as chemical compounds of normal woods and waste mushroom logs were 21.07% and 18.78%, respectively. By the results of measurement of energy consumption, the size reduction of normal woods required a significantly higher energy than that of waste mushroom logs. In the hydrolysis, total sugar yield by enzyme and acid hydrolysis were high in waste mushroom logs(53% 57.5%) than in normal woods(42.9%, 47.17%). According to the molecular weight distribution using GPC, low molecular weight compounds were distributed in waste mushroom logs. Based on these results, waste mushroom logs have enough potential as material for developing alternative energy because of easily conversion to sugar by various hydrolysis methods and requirement of low energy consumption during size reduction.

• Journal of Korean Society of Forest Science
• /
• v.95 no.5
• /
• pp.562-568
• /
• 2006

This study was conducted to examine the energy content and photosynthetic efficiency of Quercus mongolica stands in Korea. Study sites were located in Mt. Joongwang, Gangwon-do (1,000 m and 800 m above sea level), Mt. Baekwoon, Jeollanam-do (800 m a.s.l.), Mt. Halla, Jeju-do (1,000 m a.s.l.), Mt. Taehwa, Gyeonggi-do (350 m a.s.l.), and Mt. Wolak, Chungcheongbuk-do (300 m a.s.l.). Total energy content and annual energy accumulation in Q. mongolica stands were 2,916-6,435 GJ/ha and 284-441 GJ/ha, respectively. Lower latitude (N.L.) stands of Q. mongolica showed higher energy contents than higher latitude stands, but Quercus stands in Mt. Baekwoon had higher annual energy accumulation than those in Mt. Halla located at a lower latitude. During the growing season, the photosynthetic efficiency of 60 to 70-year-old Q. mongolica stands ranged from 1.19 to 1.34% while that of 35-year-old stands did from 1.87 to 1.95%. There were no significant differences in photosynthetic efficiency among the latitudes because solar radiation was higher in low latitudes.

• Korean Journal of Digital Imaging in Medicine
• /
• v.15 no.2
• /
• pp.25-30
• /
• 2013

The purpose of this study was to provide information about exhibits for nuclear energy in science museums. This analysed form and content of exhibits of science museums. The subjects were exhibits of 3 science museums; Seoul science park, Seoul national science museum, Gwachen national science museum. The research results were as follows: First, 3 science museums had similar methods of exhibits and types of explanations because of speciality of theme. 3 science museums had mostly fixed exhibit. Panel was the most types of explanations in 3 science museums. Second, 3 science museums had similar contents of exhibits. They dealt with nuclear power generation and radiation. However, Some parts such as radioactive waste, nuclear fusion generation had different. This study suggests that exhibits for nuclear energy of science museums use a variety of methods and types of explanation. Also, science museums need to increase exhibits for nuclear energy.

• New & Renewable Energy
• /
• v.6 no.2
• /
• pp.12-18
• /
• 2010

This paper reviews commercial wind mapping services provided by the oversea consulting companies, AL-PRO and anemos in Germany, AWS Truepower and 3TIER in USA. They provide quick-to-use but essential dataset for a preliminary assessment before commencing an actual feasibility study for wind farm development. Details of wind mapping method, mapresolution, data extraction height, price and so forth are compared and fresh service contents such as site analysis report are drawn from the comparison. Despite its public service, the objective value of the Renewable Energy Resource Map System of Korea Instistute of Energy Research is also confirmed and it is anticipated that the drawn new content idea will be ported to the system to enrich its applicability.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.3
• /
• pp.173-182
• /
• 2002

We investigated the effects of operating variables, such as electrical. reactor and gas parameters on toluene removal and discharge property in the dielectric barrier discharge (DBD) process. The toluene removal was initiated with the energy transfer to the reactor by loading of voltages higher than the discharge onset value. The energy transfer and toluene removal increased with the applied voltage. Higher removal rate was observed with smooth surface electrode despite of lower energy transfer compared with the coarse electrode, because more uniform discharge can be obtained on smooth surface state. The decrease of dielectric material thickness enhanced the removal efficiency by increasing the discharge potential. The toluene removal efficiency decreased with the increase of the inlet concentration. The increase of gas retention time enhanced the removal efficiency by the increase of energy density. The oxygen and humidity contents seem to exert significant influences on the toluene removal by dominating the generation of electrons, ions, and radicals which are key factors in the removal mechanism.

• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.132-146
• /
• 2015

To develop tailored elementary, middle, and high school textbooks suitable for understanding the nuclear energy and radiation, quantitative and qualitative research was carried out in parallel, which included nine steps to ensure the validity of content and structure. The elementary, middle, and high school students wanted to acquire information used in their daily lives, including the definition of nuclear energy and radiation, principles and status of nuclear power generation, and information about irradiated food, medical radiation, and radiation in life. In the evaluation of the effects of textbook contents according to the educational requirements of each school level, high suitability frequencies (>80%) were shown for the human character, education goals, curriculum goals, evaluation method, and education time. At some levels, the high suitability frequencies (>70%) were shown for the education grade, education type, and textbook type.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.17-21
• /
• 2017

The optimum mixing conditions of silica and silane containing rubber composites were evaluated by investigating the properties of rubber composites prepared with a silica composition of 10, 20, 40, 60, and 80 g, respectively. The crosslinking rate decreased with increasing silica content, with he promoters being adsorbed on the silica surface with in the rubber composite. As a result, the increase in crosslinking time resulted in the destruction of the silica structure. The increase of the bound rubber content due to the destruction of the silica structure inhibited the chain motion of the polymer molecules and reduced the cohesion of the silica itself. Finally, the increase of silica content showed the increase of hardness, tensile strength, and storage modulus of rubber composites.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.389-394
• /
• 2001

The notched Charpy and Izod impact tests arc the most prevalent techniques used to characterize the effects of high impulse loads on ploymeric materials. An analysis method for rubber toughened PVC is suggested to evaluate critical strain energy release rates(Gc) from the Charpy impact energy measurements. An Instrumented Charpy impact tester was used to extract ancillary information concerning fracture properties in addition to total fracture properties and maximum critical loads. The stress intensity factor Kd was computed for varying amounts of rubber contents from the obtained maximum critical loads and also toughening effects were investigated as well.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.329-337
• /
• 2005

Synroc which comprises hollandite-rich ($Ba_{1-x}Cs_{2x}\;(Al_yTi_{2-y})\;Ti_{6}O_{16},\;75wt\%$), perovskite ($Ca_{1-x}Sr_xTiO_3,\;15wt\%$) and rutile ($TiO_2,\;10wt\%$) is devised for the immobilization of Sr/Cs (1:3, wt$\%$) separated from HLW liquid. Especially, hollandite-rich Synroc with different contents of Al element is fabricated, and its mineral phase assemblage and microstructure are determined by using XRD and SEM/EDS. The durability test is carried out by using MCC-1 method, leachate is analyzed by using ICP/MS and ICP/ AES. The results indicate that hollandite-rich Synroc variants is a suitable host for Immobilization of Sr/Cs separated from HLW liquid.