• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.101-108
• /
• 2010

Many works on energy-efficient cluster event detection schemes have been done considering the energy restriction of sensor networks. The existing cluster event detection schemes transmit only the boundary information of detected cluster event nodes to the base station. However, If the range of the cluster event is widened and the distribution density of sensor nodes is high, the existing cluster event detection schemes need high transmission costs due to the increase of sensor nodes located in the event boundary. In this paper, we propose an energy-efficient cluster event detection scheme using the minimum boundary polygons (MBP) that can compress and summarize the information of event boundary nodes. The proposed scheme represents the boundary information of cluster events using the MBP creation technique in the large scale of sensor network environments. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through the performance evaluation. Simulation results show that our scheme maintains about 92% accuracy and decreases about 80% in energy consumption to detect the cluster event over the existing schemes on average.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.215-220
• /
• 2013

In the present work, 6061 Al-$B_4C$ sintered composites containing different $B_4C$ contents were fabricated and their characteristic were investigated as a function of sintering temperature. For this, composite powders and their compacts with $B_4C$ various contents from 0 to 40 wt.% were fabricated using a planetary ball milling equipment and cold isostatic pressing, respectively, and then they were sintered in the temperature ranges of 580 to $660^{\circ}C$. Above sintering temperature of $640^{\circ}C$, real density was decreased due to the occurrence of sweat phenomena. In addition, it was realized that sinterability of 6061Al-$B_4C$ composite material was lowered with increasing $B_4C$ content, resulting in the decrease in its real density and at the same time in the increment of porosity.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.43-49
• /
• 2018

Recently, with the rapid increasing demands for data services on the Internet, the need for large-scale data centers has been increased. However, these data centers consume enormous amounts of energy to run numerous servers and equipment. In this paper, we therefore propose a novel scheme to save energy in multimedia servers by concentrating the load on specific servers according to the current load level of the overall system and turning them off immediately. To this end, the number of server groups in which each video is stored is determined according to its popularity so that video playback requests can be evenly distributed to the entire system. Finally, through extensive simulations, we show that our proposed data placement and power management scheme in multimedia servers significantly reduces energy consumption by decreasing the number of servers whose powers are on when compared with the existing method, while maintaining the service quality.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.469-474
• /
• 2001

Milling the rice with low moisture requires more energy, produces more cracked rice, and results in reducing taste of cooked rice. Accordingly, it is necessary to add moisture to the rice with low moisture to obtain optimum moisture level for milling and taste of rice. This study was performed to evaluate the influence of initial moisture content and absorption rate on rice crack, milling energy and whiteness of milled rice and to obtain the information for design of rewetting system mounted on stirring device in grain bin. The tests were conducted for the four levels of initial moisture content in the range of 11.4 to 14.5%(w.b.) and six levels of absorption rate in the range of 0.04 to 1.0%, w.b./hr. In the case of lower moisture content below 12%(w.b.), crack ratios of brown rice were remarkably high regardless of initial moisture contents. Therefore, it was found that rough rice below 12%(w.b.) in initial moisture content could not rewetted by spraying water without crack generation of low level. Absorption rate must be below 0.3%, w.b./hr to maintain crack ratio increase of less than 1% regardless of initial moisture contents. In the case of allowable crack ratio increase of 2% and 5%, it was found that the maximum absorprion rate was respectively 0.6%, w.b./hr and 1.0%, w.b./hr in the initial moisture content of above 13.5%(w.b.). Rewetting the rough rice in moisture content of 11.4 to 14.5%(w.b.) to 14.3 to 16.9%(w.b.) decreased milling energy consumption by 15.9 to 22.3%. The effect of energy saving was higher in the samples of higher initial moisture content. Whiteness of milled rice was decreased by 0.5 to 1.5.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.245-252
• /
• 1993

We investigated the changes of (U, Ce)$O_2$ powder characteristics with $CeO_2$ contents and ball-milling time and then studied on the sintering properties with those (U, Ce)$O_2$ powder characteristics. From the results of this study, it was concluded that the longer ball-milling time of (U, Ce)$O_2$ powder was, the finer its particle size was. Green and sintered densities were decreased with $CeO_2$ contensts increase. And also $CeO_2$ was recongized deteriorating oxide on the $UO_2$ sintering. In case of the lOwt. % $CeO_2$ contents, (U, Ce)$O_2$ sintered pellet which was made of ball-milled powder for 4 hours had few pores and its pores got near to the sphere. And its sintered density had the highest. Because its powder had higher surface area and its packing ratio was appropriated much better than others.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.558-566
• /
• 2021

Objective: Objectives were to estimate energy and protein requirements of dairy crossbred steers, as well as to evaluate equations previously described in the literature (HH46 and CS16) to predict the carcass and empty body chemical composition of crossbred dairy cattle. Methods: Thirty-three Holstein×Zebu steers, aged 19±1 months old, with an initial shrunk body weight (BW) of 324±7.7 kg, were randomly divided into three groups: reference group (n = 5), maintenance level (1.17% BW; n = 4), and the remaining 24 steers were randomly allocated to 1 of 4 treatments. Treatments were: intake restricted to 85% of ad libitum feed intake for either 0, 28, 42, or 84 d of an 84-d finishing period. Results: The net energy and the metabolizable protein requirements for maintenance were 0.083 Mcal/EBW0.75/d and 4.40 g/EBW0.75, respectively. The net energy (NEG) and protein (NPG) requirements for growth can be estimated with the following equations: NEG (Mcal/kg EBG) = $0.2973_{({\pm}0.1212)}{\times}EBW^{0.4336_{({\pm}0.1002)}$ and NPG (g/d) = 183.6(±22.5333)×EBG-2.0693(±4.7254)×RE, where EBW, empty BW; EBG, empty body gain; and RE, retained energy. Crude protein (CP) and ether extract (EE) chemical contents in carcass, and all the chemical components in the empty body were precisely and accurately estimated by CS16 equations. However, water content in carcass was better predicted by HH46 equation. Conclusion: The equations proposed in this study can be used for estimating the energy and protein requirements of crossbred dairy steers. The CS16 equations were the best estimator for CP and EE chemical contents in carcass, and all chemical components in the empty body of crossbred dairy steers, whereas water in carcass was better estimated using the HH46 equations.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.309-319
• /
• 2022

As a study on the mechanisms by which creativity is improved in an organization, this study tried to verify the serial multiple mediating effects of relational energy and creative process engagement in the effect of leader-member exchange(LMX) on creativity. To test the hypothesis, a survey was conducted on 200 workers in China, and 154 of them were analyzed. The analysis used model 6 of the PROCESS macro. As a result, first, LMX has positive effects on creativity. Second, relational energy mediated the relationship between LMX and creativity. Third, creative process engagement mediated the relationship between LMX and creativity. Forth, relational energy and creative process engagement continuously mediated the relationship between LMX and creativity. Based on these research results, the implications and limitations of this study were presented, and methods to improve creativity in the organization were discussed.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.238-245
• /
• 2012

Graphene oxide was synthesized from natural graphite, and its surface was modified using diisocyanatodicyclohexylmethane( $H_{12}MDI$). Isocyanate-graphene sheet(i-RGO) was obtained by reduction of surface modified GO. To select nanofiller having good dispersion with polyurethane, GO, i-RGO, natural graphite and thermal reduced graphite were analyzed, and then i-RGO was selected as a suitable nanofiller. PU/i-RGO nanocomposite was synthesized with various i-RGO contents to estimate effect of reinforcement on nanocomposite. Thermal stability, hardness, contact angle were increased with i-RGO contents due to i-RGO characteristic and crosslink bridge effect. But, tensile strength and elongation were decreased at i-RGO contents more than the 4 wt%. This phenomenon was interpreted by the excess formation of crosslink bridge.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.97-100
• /
• 1992

Locally available milk mix, coconut meal, cassava root meal, cassava leaf meal, maize, meat meal, fish meal, rice bran, rice polishings, wallow, molasses and coral sand in Fiji were analysed for proximate components, gross energy and mineral contents. The results obtained indicated typical and variable amounts of nutrients in these materials. On the basis of their nutrient contents, the potential usefulness and weaknesses of the various feed materials are discussed with specific reference to the formulations of diets for livestock and poultry in Fiji based on these locally available feed materials.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.255-256
• /
• 2014

현재 대학공연장에 다양하고 화려한 조명을 많이 사용된다. 많은 수량이 필요한 등기구에 활용가능한 LED 등기구가 대체 선호되고, LED 등기구 장점인 에너지 절감에 대해 연구를 진행하였다. 설비와 장비에 대한 교체 비용을 포함하여 기존할로겐 등기구보다 LED등기구가 약3,000만원 정도 에너지 절감이 되는 것을 알 수 있었다.