• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.61-69
• /
• 2024

This study investigates the barriers to the deployment of solar thermal and ground source heat pump (GSHP) from the perspective of consumers and businesses, as well as evaluates priorities for improving the barriers via expert AHP evaluation. From a consumer's perspective, the overall satisfaction with solar thermal is significantly lower than that with PV and needs to be improved at the installation and use stages. GSHP needs to be improved at the prior-information search stage. From a business perspective, the non-distinction between heat and electricity in mandatory installations in public buildings, the difficulty in assessing the value of heat, and high initial costs impede the deployment. Based on the result of AHP analysis, the priorities for improving the barriers to the wide utilization of solar thermal are evaluated in the order of economic feasibility, policy, acceptability, and technology, where high installation cost is shown to be the greatest barrier. Barriers for GSHP are evaluated in the order of policy, acceptability, economic feasibility, and technology, where policy means improvement is evaluated as the most important factor in promoting the deployment of GSHP.

• Korean Journal of Organic Agriculture
• /
• v.12 no.1
• /
• pp.67-80
• /
• 2004

Farm economy is getting worse because of the free trade trends in agriculture sector and unreasonable application of market economy principles to agricultural products. And The worldwide issues of environmental pollution as well as want of food, water and energy make human future be anxious. In addition, consumers raise questions in argument about safety of foods produced by traditional farming or imported. So I propose the urban-rural living community movement(URLCM) as an alternative plan for sustainable domestic agriculture. URLCM based on environmentally friendly agriculture and community consciousness will be able to solve many of present issues on agriculture and rural society through incessant interchanges between urban and rural community. This URLCM has to be basically founded on principles of symbiosis-coexistence and life circulation. So those that have to be driven forward arc organizing producers and consumer cooperatives, making environmentally friendly rural region and products, combining with consumer cooperatives, training the participants and so forth.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.39 no.1
• /
• pp.49-67
• /
• 2014

This paper proposes a real time pricing model for smart grid considering consumers' behavior, real time price elasticity, and exogenous price. Based on the proposed model, we found the weight of utility over cost is the most sensitive factor compared to other factors. Also, if the electricity price is set to be changed too sensitively to energy consumption, it is warned that real time pricing sometimes can cause increment of peak-time demand and volatility. Finally, real time pricing could be less efficient when the difference between the maximum and the minimum consumption level is small.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.650-655
• /
• 2009

In this study, a consumer willingness to pays for residential heating systems are estimated by economic valuation method. The major Korean residential heating systems in apartments are central heating system (CH), district heating system (DH), and individual heating system (IH). However, DH and IH systems are adopted in newly constructed apartments. Each heating system has own characteristics which residents can identify and value. 700 households in apartment were surveyed to analyze the preference of the residential heating systems and to estimate willingness to pay. We find that the households in DH system are more satisfied with their heating system than the households in other systems overall and that consumers prefer an apartment with DH system than with IH system and the willingness to pay for IH system is less than DH system. The results indicate that DH system has the relative premium which may be caused by the safety and the convenience to manage the system.

• Asian Journal of Innovation and Policy
• /
• v.5 no.2
• /
• pp.185-196
• /
• 2016

A digital cable broadcasting service is a multimedia broadcasting service that provides high definition and various supplementary services by using digital transmission. Korea implemented a complete digital broadcasting service by 2012. This study applied a choice experiment to investigate consumer preferences, and it calculated the marginal willingness to pay for this service. Moreover, we employed a multinomial probit model to relax the assumption that all respondents have the same preference for attributes being valued. The results suggest that respondents value channels, definition, video-on-demand (VOD) service, pay-per-view (PPV) service, and commerce based on TV (T-commerce). On the other hand, online gaming may be less important as an attribute for digital cable broadcasting service in Korea.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.845-852
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention from not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation on the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100 mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6 % at 2 m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfering distance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.771-776
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention of not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation for the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6% at 2m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfer distance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1076-1089
• /
• 2012

Home automation networks are good environments for merging sensor networks and consumer electronics technologies. It is very important to reduce the energy consumption of each sensor node because sensor nodes operate with limited power based on a battery that cannot be easily replaced. One of the primary mechanisms for achieving low energy operation in energy-constrained wireless sensor networks is the duty-cycle operation, but this operation has several problems. For example, unnecessary energy consumption occurs during synchronization between transmission schedules and sleep schedules. In addition, a low duty-cycle usually causes more performance degradation, if the network becomes congested. Therefore, an appropriate control scheme is required to solve these problems. In this paper, we propose UDC (Unsynchronized Duty-cycle Control), which prevents energy waste caused by unnecessary preamble transmission and avoids congestion using duty-cycle adjustment. In addition, the scheme adjusts the starting point of the duty-cycle in order to reduce sleep delay. Our simulation results show that UDC improves the reliability and energy efficiency while reducing the end-to-end delay of the unsynchronized duty-cycled MAC (Media Access Control) protocol in sensor-based home automation networks.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.86-91
• /
• 2018

This paper is a review of accounts balancing time in small distributed power trading platform using blockchain technology. First, the national VPP energy management system using the AMI applied to this study is introduced and then the accounts balancing time and process of the cryptocurrency coin payment which based on the power generation of pro-consumer certified by power big data analysis in a test bed environment is discussed. Futhermore the configuration of a power Big Data analysis system with GPU Fast Big Data that applies MapD to current lambda architecture is also introduced.

• Journal of Korean Society for Quality Management
• /
• v.49 no.2
• /
• pp.161-170
• /
• 2021

Purpose: The purpose of this study was to evaluate the economic value of installing public Energy storage system (ESS) facilities using a logit regression analysis and Contingent Valuation Method (CVM). We focused mainly on the environmental benefits of ESS and analyzed how the users' attitude toward environmental protection and knowledge of renewable energy affect their Willingness to pay (WTP) Methods: A single-bounded dichotomous choice (SBDC) survey was used to collect the data. We asked participants whether they are willing to pay a randomly presented cost (KRW 100, 500, 1000, 1500, 2000, 2500, 5000, 10000) along with their attitude to toward environmental protection, knowledge of renewable energy, and perceived cost of electric bill. 417 valid samples were collected and used for the analysis. Results: The results of the logit regression show that the initial bid, attitude toward environmental protection, knowledge of renewable energy, and perceived cost of electric bill significantly affect the user's WTP of public ESS facilities. The CVM results show that users are willing to pay KRW 5,049.1/month to install ESS facilities. Conclusion: : According to results, we conclude that the users agree with the need to install ESSs and that environmental benefits of ESSs are important factors for ESS adoption. Therefore, policy makers need to emphasize environmental aspects to install the ESS facilities.