• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.235-240
• /
• 2004

This paper deals with the performance analysis of impulse turbine for owe type wave energy conversion device. Numerical analysis was performed using a commercially-available software FLUENT. This parametric study includes the variation of the setting angle of guide vane. Since parametric study at various flaw coefficients requires tremendous amounts of computing time, two-dimensional cascade flaw approximation was employed to find out optimum principal particulars in rather simple manner. Full three-dimensional calculation was also performed for several cases to confirm the validity of two-dimensional approach. Results were compared to other experimental data, for instance Setoguchi et al (2001)'s extensive set of data, and found to be well demonstrating the usefulness of 2-D analysis. Advantages and disadvantages of each method were also evaluated.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 추계 학술발표회 논문집
• /
• pp.57-62
• /
• 2001

본 연구에서는 검증된 BSU 3톤/일급 석탄가스화공정에 대해 개발된 동적모델을 폐유가스화 공정모텔에 적용하였다. 대상공정에 포함된 조작변수들의 변동에 따른 주요 공정변수인 산소/폐유비를 3% 계단증가시킨 결과, 폐유가스화기의 압력은 15분의 시상수를 보이며 최종적으로 2.4%가 증가된 정상상태에 도달하였고, 온도는 초기 1분 이내에 약 3.2%의 급격한 증가를 보인 후 최종적으로 4.1% 증가된 정상상태에 도달하였다. 그리고 생성가스의 조성은 이산화탄소가 6% 증가되었고, 일산화탄소와 수소는 각각 2% 및 8% 감소된 새로운 정상상태에 도달하였다. 이러한 결과를 토대로 폐유가스화기의 부하변동에 따른 주요 공정변수들의 변동경향 및 신뢰성 있는 동적모사 결과를 얻고, 개발된 모델에 cascade 및 ratio 방식의온도, 압력 제어로직을 설계하여 실공정 적용실험을 통한 전산모사결과 및 안정된 운전특성을 검증할 수 있는 기초를 마련하였다.

• Advances in aircraft and spacecraft science
• /
• 제4권5호
• /
• pp.555-571
• /
• 2017

The description of transitional flows by means of RANS equations is sometimes based on non-local approaches which require the computation of some boundary layer properties. In this work a non-local Laminar Kinetic Energy model is used to predict transitional and separated flows. Usually the non-local term of this model is evaluated along the grid lines of a structured mesh. An alternative approach, which does not rely on grid lines, is introduced in the present work. This new approach allows the use of fully unstructured meshes. Furthermore, it reduces the grid-dependence of the predicted results. The approach is employed to study the transitional flows in the T106c turbine cascade and around a NACA0021 airfoil by means of a discontinuous Galerkin method. The local nature of the discontinuous Galerkin reconstruction is exploited to implement an adaptive algorithm which automatically refines the mesh in the most significant regions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.459.1-459.1
• /
• 2014

Because both $TiO_2$ and ZnO has superior characteristic optically and electrically, there are various of research for these materials. However, they have large band gap energy which correspond with not visible light, but UV light. To make up for this disadvantage, Quantum dots (CdS, CdSe) which can absorb the visible light could be deposited on $ZnO/TiO_2$ nanostructure so that the the photoelectrochecmical cell can absorb the light that has larger region of wavelength. Both $TiO_2$ and ZnO can be grown to one-dimensional nanowire structure at low temperature through solutional method. Three-dimensional hierarcical $ZnO/TiO_2$ nanostructure is fabricated by applying these process. Large surface area of this structure make the light absorbed more efficiently. Through type 2 like-cascade energy band structure of nanostructure, the efficient separation of electron-hole pairs is expected. Photoelectrochemical charateristics are found by using these nanostructure to photoelectrode.

• 한국식품영양과학회지
• /
• 제41권7호
• /
• pp.901-906
• /
• 2012

본 연구에서는 넓패 메탄올 추출물의 농도별 처리가 인체 자궁암 세포 HeLa의 세포사멸에 미치는 영향을 확인하기 위하여 세포독성 측정, Hoechst 33258 staining, flow cytometry 분석을 통하여 세포사멸을 확인하였다. 넓패 메탄올 추출물 처리 시 HeLa 세포에서 농도 의존적으로 세포의 증식을 억제하였으며, 또한 넓패 메탄올 추출물은 농도 의존적으로 핵을 응축하고 apoptotic bodies을 생성하였다. 유세포 분석을 통하여 apoptosis를 측정한 결과, 넓패 메탄올 추출물의 농도가 증가함에 따라 유의적으로 apoptotic 세포가 증가하였다. Western blot을 통해 PARP 단백질의 절단 현상을 분석한 결과, 넓패 메탄올 추출물의 처리 농도와 시간에 따라 PARP 단백질의 절단 현상이 증가하였다. 또한 넓패 메탄올 추출물은 caspase-8, caspase-9 및 caspase-3 활성을 농도와 시간에 따라 증가시켰으며, caspase 저해제인 z-VAD-fmk로 처리 시 넓패 메탄올 추출물에 의한 세포사멸이 유의적으로 감소되어 넓패 메탄올 추출물에 의한 HeLa 세포의 apoptosis 유도에 caspase가 중요한 역할을 하고 있음을 확인하였다. 따라서 넓패 메탄올 추출물은 HeLa 자궁암 세포의 apoptosis를 유도하는 것으로 나타나 넓패의 항암효과 가능성을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.11-20
• /
• 2009

Radiation effects on materials are inherently multiscale phenomena in view of the fact that various processes spanning a broad range of time and length scales are involved. A multiscale modeling approach to embrittlement of pressure vessel steels is presented here. The approach includes an investigation of the mechanisms of defect accumulation, microstructure evolution and the corresponding effects on mechanical properties. An understanding of these phenomena is required to predict the behavior of structural materials under irradiation. We used molecular dynamics (MD) simulations at an atomic scale to study the evolution of high-energy displacement cascade reactions. The MD simulations yield quantitative information on primary damage. Using a database of displacement cascades generated by the MD simulations, we can estimate the accumulation of defects over diffusional length and time scales by applying kinetic Monte Carlo simulations. The evolution of the local microstructure under irradiation is responsible for changes in the physical and mechanical properties of materials. Mechanical property changes in irradiated materials are modeled by dislocation dynamics simulations, which simulate a collective motion of dislocations that interact with the defects. In this paper, we present a multi scale modeling methodology that describes reactor pressure vessel embrittlement in a light water reactor environment.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1146-1155
• /
• 2017

Normally, the artificial intelligence algorithms are widely applied to the optimal controller design. Then, it is expected that the best output performance is achieved. Unfortunately, when resulting controller parameters are implemented by using the practical devices, the output performance cannot be the best as expected. Therefore, the paper presents the optimal controller design using the combination between the state-space averaging model and the adaptive Tabu search algorithm with the new criteria as two penalty conditions to handle the mentioned problem. The buck-boost converter regulated by the cascade PI controllers is used as the example power system. The results show that the output performance is better than those from the conventional design method for both input and load variations. Moreover, it is confirmed that the reported controllers can be implemented using the realistic devices without the limitation and the stable operation is also guaranteed. The results are also validated by the simulation using the topology model of MATLAB and also experimentally verified by the testing rig.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.178-183
• /
• 2014

Recently, various type of nanomaterials such as nanorod, nanowire, nanotube and their core/shell nanostructures have attracted much attention in photocatalyst due to their unique properties. Among them, Type-II core/shell heterostructures have extensively studied because it has exhibited improved electrical and optical properties against their single-component nanostructure. Such structures are expected to offer high absorption efficiency and fast charge transport due to their stepwised energetic combination and large internal surface area. Thus, it has been considered as potential candidates for high efficient photocatalytic activity. In this work, we introduce a novel chemical conversion process to synthesize Type-II ZnO/ZnSe core/shell heterostructures. A plausible conversion mechanism to ZnO/ZnSe core/shell heterostructres was proposed based on SEM, XRD, TEM and XPS analysis. The ZnO/ZnSe heterostructures exhibited excellent photocatalytic activity toward the decomposition of RhB dye compared to the ZnO nanorod arrays due to enhanced light absorption and the type-II cascade band structure.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 2003년도 Annual Meeting of KSAP : International Symposium on Pharmaceutical and Biomedical Sciences on Obesity
• /
• pp.15-23
• /
• 2003

Interest in the regulation of body weight and the pathological physiology of obesity has been rekindled by the cloning of the obese(ob) gene and identification of its product, leptin, in 1994. The first publication appeared in Nature and is a milestone of obesity research. The remarkable metabolic effects of leptin in rodents are: a) inhibition of food intake, b) stimulation of energy expenditure, and c) reversal of obesity. These effects, though mostly desirable, have not been fully demonstrated in humans. The central action of leptin in the regulation of body weight includes two pathways in rodents: a) When the body weight increasing, more leptin is secreted from adipose tissue, which acts on hypothalamus, probably through a POMC or MSH pathway via M4 receptor, initiates a series of response to obesity, i.e. sympathetic tone increased, energy expenditure enhanced and food intake reduced. b) When body weight reduced, leptin concentration decreased with the shrinkage of fat mass, which may also act on the hypothalamus, probably through a NPY-Y5 receptor pathway. Then a cascade of response to hungry was induced, i.e. increase of parasympathetic tone and food intake, decrease of energy expenditure and body temperature, as well as shut-down of the reproductive function.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권8호
• /
• pp.416-422
• /
• 2006

With the increasing demand for renewable energy, distributed power included in fuel cells have been studied and developed as a future energy source. For this system, a power conversion circuit is necessary to interface the generated power to the utility. In many cases, a high step-up dc/dc converter is needed to boost low input voltage to high voltage output. Conventional methods using cascade dc/dc converters cause extra complexity and higher cost. The conventional topologies to get high output voltage use flyback dc/dc converters. They have the leakage components that cause stress and loss of energy that results in low efficiency. This paper presents a high boost converter with a voltage multiplier and a coupled inductor. The secondary voltage of the coupled inductor is rectified using a voltage multiplier and series-connected with the boost voltage of primary voltage of the coupled inductor. Therefore, high boost voltage is obtained with low duty cycle. Theoretical analysis and experimental results verify the proposed solutions using a 300W prototype.