• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.5
• /
• pp.406-414
• /
• 2017

An experimental study in a recirculating water channel was carried out to investigate the effect of large coherent structures to the skin friction on a flat plate. Particle Image Velocimetry (PIV) technique was used to quantify characteristic features of coherent structures growing to the boundary layer. In the PIV measurement, it is difficult to calculate the friction velocity near the wall region due to laser deflection and uncertainty so that Clauser fitting method at the logarithmic region was adopted to compute the friction velocity and compared with the one directly measured by the dynamometer. With changing the free-stream velocity from 0.5 m/s to 1.0 m/s, the activity of coherent structures in the logarithmic region was increased over three times in terms of Reynolds stress. The flow field was separated by Variable Interval Time Averaging (VITA) technique into the weak and the strong structure case depending on the existence large coherent structures in order to validate its effectiveness. The stream-wise velocity fluctuation was scanned through at the boundary thickness whether it had a large deviation from background flow. With coherent structures connected from near-wall to the boundary layer, mean wall shear stress was higher than that of weak structure case. Proper Orthogonal Decomposition (POD) analysis was also applied to compare the energy budget between them at each free-stream velocity.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.281-304
• /
• 2011

In the energy-climate era, pollution emissions from port activities have a significant issue in international shipping and port community. Thus international organization such as IMO and developed countries are seeking to develop various reduction strategies against air pollution. However Korea has recently conducted several studies concerning air pollution in port industry. The main purpose of the paper is to suggest emission reduction strategies for bulk terminal in Port of Incheon, which handles large amount bulk cargoes as a gateway for the metropolitan area. For this aim, the clean air strategies of the world major ports were considered and air pollution reduction strategies were suggested. The main findings of this paper are as follows. First, the emission reduction strategies for container terminal are should be integrated based on technologies changes, operational changes and market-based measures. Second, the emission reduction strategies for bulk terminal can be effective when use innovative measures during loading, unloading and storage process such as telescopic cascade trimming chute, snake sandwich equipment, dry fog system and dome structure. Finally, investigation on actual conditions of air pollution in Korean ports and development of environmental evaluation scheme for persisting monitoring should be conducted.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.71-76
• /
• 2017

The electrical behavior and flexibility of the screen printed Ag circuits were investigated with infrared radiation sintering times and sintering temperatures. Electrical resistivity and radio frequency characteristics were evaluated by using the 4 point probe measurement and the network analyzer by using cascade's probe system, respectively. Electrical resistivity and radio frequency characteristics means that the direct current resistance and signal transmission properties of the printed Ag circuit. Flexibility of the screen printed Ag circuit was evaluated by measuring of electrical behavior during IPC sliding test. Failure mode of the Ag printed circuits was observed by using field emission scanning electron microscope and optical microscope. Electrical resistivity of the Ag circuits screen printed on Pl substrate was rapidly decreased with increasing sintering temperature and durations. The lowest electrical resistivity of Ag printed circuit was up to $3.8{\mu}{\Omega}{\cdot}cm$ at $250^{\circ}C$ for 45 min. The crack length arisen within the printed Ag circuit after $10{\times}10^4$ sliding numbers was 10 times longer than that of after $2.5{\times}10^4$ sliding numbers. Measured insertion loss and calculated insertion loss were in good agreements each other. Insertion loss of the printed Ag circuit was increased with increasing the number of sliding cycle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.87-87
• /
• 2000

이온빔 증착에 있어서 전자의 조사가 이온빔 증착기구에 미치는 영향에 대한 연구는 지금까지 보고 되어지지 않았다. 특히 전자의 조사가 증착층의 물성에 영향을 미칠 수 있느지에 대하여 정량적인 결과를 실험을 통하여 제시한 보고는 내가 아는 한 존재하지 않는다. 한편 이와같이 박막 증착에 있어서 전하가 증착되어지는 박막의 물성에 미칠 수 있는 영향에 대해서는 많은 과학자들의 관심사이기도 하다. 본 실험에서는 kaufman ion gun을 이용하여 질소 양이온을, 그리고 Cs+ ion gun을 이용하여 탄소 음이온을 조사하고 이들을 이용하여 CN 박막을 증착하였다. 질소 양이온의 에너지는 100eV, 이온밀도는 70$\mu$A/$\textrm{cm}^2$로 고정하고, 탄소 이온빔(80$\mu$A/$\textrm{cm}^2$)의 에너지를 200cV까지 변화시켜가며 증착하였다. 이때 증착층의 특성에 음 전하의 효과를 유발하기 위하여 350~360$\mu$A/$\textrm{cm}^2$의 전자빔을 이온빔 증착과 동시에 추가로 조사하였고 이의 특성을 전자빔을 조사하지 않고 증착한 CN 박막의 특성과 서로 비교하였다. 또한 증착 표면의 전하 축적에 의한 입사 이온빔의 에너지 감소에 의한 영향을 방지하기 위하여 증착되는 Si 기판에 HF (300kHz, 3.5V) bias를 가하여 주었다. 전자빔의 조사와 동시에 이루어진 CN 박막의 증착은 입사하는 탄소 음 이온빔의 에너지가 80eV에서 180eV 사이일때 원자밀도의 향상과 질소함량의 증가, 그리고 sp2C-N 결합대비 sp3C-N 결합의 향상이 이루어졌음을 확인하였다. 이는 이온빔 충돌에 의하여 피코쵸 정도의 시간대에 이루어지는 박막내의 collision cascade 영역에 이에 의하여 생긴 결함부위에 유입된 음 전하가 위치하면 전하주위의 원자와 polarization을 형성하고 이에 의하여 탄소와 질소의 결합을 형성하는데 필요한 자유에너지의 감소를 수반하는 방향으로 원자의 배열이 이루어지기 때문으로 사료된다. 이와같이 이온빔 에너지가 이온빔 증착 기구의 주요한 인자로 널리 인식되고 있는 kinetic bonding process에 있어서 이온 에너지에 의하여 activation energy barrier를 넘은후, 전자의 조사가 자유에너지를 낮추는 방향으로 최종 결합경로를 조절할 수 있기 때문에 이온빔 증착을 조절할 수 있는 또 하나의 주요한 인자로 받아들여질 수 있으리라 판단된다. 이온빔 프로세스에 의한 DLC 혹은 탄소관련 필름을 형성하는데 있어서 입사 이온빔의 에너지에 의하여 수반되는 thermal spike 혹은 외부 열원에 의한 가열은 박막층의 흑연화를 수반하기 때문에 박막의 sp3 특성을 향상시키기 위하여 회피하여야 할 요소이지만 thermal spike에 의한 국부 영역의 가열과 같은 불가피한 인자가 존재하는 상황에서 전자에 의한 추가 전하의 조사에 의한 최종결합경로의 선택적 조절은 박막의 화학적 결합과 물리적 특성을 향상시킬 수 있는 중요한 방법이 될 수 있다고 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.112-118
• /
• 2009

This paper proposes a rapid detection algorithm of a salient region for music video browsing system, which can be applied to mobile device and digital video recorder (DVR). The input music video is decomposed into the music and video tracks. For the music track, the music highlight including musical chorus is detected based on structure analysis using energy-based peak position detection. Using the emotional models generated by SVM-AdaBoost learning algorithm, the music signal of the music videos is classified into one of the predefined emotional classes of the music automatically. For the video track, the face scene including the singer or actor/actress is detected based on a boosted cascade of simple features. Finally, the salient region is generated based on the alignment of boundaries of the music highlight and the visual face scene. First, the users select their favorite music videos from various music videos in the mobile devices or DVR with the information of a music video's emotion and thereafter they can browse the salient region with a length of 30-seconds using the proposed algorithm quickly. A mean opinion score (MOS) test with a database of 200 music videos is conducted to compare the detected salient region with the predefined manual part. The MOS test results show that the detected salient region using the proposed method performed much better than the predefined manual part without audiovisual processing.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.109-119
• /
• 2006

This study investigated the effect of artificially enhanced mesozooplankton on the phytoplankton dynamics during fall blooming period using a mesocosm in Jangmok bay located in the Southern Sea of Korea in 2001. The four bags with 2,500 liter seawater containment were directly filled with the ambient water. And then, abundances of mesozooplankton in two experimental bags were treated 6 times higher than those in control bags by towing with net($300{\mu}m$) through the ambient water. Phytoplankton community between control and experimental bags were not significantly different in terms of chlorophyll-a(chl-a) concentration and standing crop (one-way ANOVA, p>0.05) during the study period. Initial high standing crop and chl-a concentration of phytoplankton drastically decreased and remained low until the end of the experiment in all bags. Diatoms, accounting for most of the phytoplankton community, consisted of Skeletonema costatum, Pseudo-nitzschia seriata, Chaetoceros curvisetus, Ch. debilis, Cerataulina pelagica, Thalassiosira pacifica, Cylindrotheca closterium, and Leptocylindrus danicus. Noctiluca scintillans dominated the temporal variation of mesozooplankton abundances, which peaked on Day 10 in the control and experimental bags, while the next dominant copepods showed their peak on Day 7. Shortly after mesozooplankton addition, copepod abundance in the experimental bags was obviously higher than that in the control bags on Day 1, however, it became similar to that in the control bags during the remnant period. It was supported by the higher abundance and length of both ctenophores and hydromedusae in experimental bags relative to the control bags. However, the cascading trophic effect, commonly leading to re-increase of phytoplankton abundance, was not found in the experimental bags, indicating that copepods were not able to control the phytoplankton in the bags based on the low grazing rate of Acartia erythraea. Besides that, rapidly sunken diatoms in the absence of natural turbulence as well as N-limited condition likely contributed the no occurrence of re-increased phytoplankton in the experimental bags.