A chemiluminescent method with silver nanoparticles for determination of L-alanine has been presented. The chemilumiscence intensity was further enhanced by silver nanoparticles in the luminol system by its catalytic role. The silver nanoparticles enhanced chemiluminescent method is applicable for the determination of an amino acid such as alanine. When alanine was introduced to the luminol system with silver nanoparticles, chemiluminescence intensity was reduced with the concentration of the added alanine. The effects of pH, concentrations of luminol, hydrogen peroxide and silver nanoparticles on the chemiluminescence intensity were investigated. The calibration curve for L-alanine was linear over the range from 6.60×10-8 M to 4.00×10-7 M, coefficient of correlation was 0.996 and detection limit was 3.5×10-9 M under the optimal conditions of 4.0×10-3 M, 4.0×10-2 M, 4.0×10-4 M, 12.8 for the concentration of luminol, H2O2, silver nanoparticles and pH, respectively.
A sensitive and selective determination method of Fe(II) ion by luminol-H2O2 system using a chelating reagent has been presented. A metal ion-chelating ligand complex such as Fe(II)-diethylenetriamine pentaacetic acid (DTPA) produced higher chemiluminescence (CL) intensity as well as longer lifetime in luminol-H2O2 system than metal exist as free ions. Furthermore, the catalytic activity of Cu(II) and Pb (II) complexes with chelating reagents in luminol-H2O2 system was lost since chelating reagents act as a masking agent although free Cu(II) and Pb(II) ions have high catalytic activity. On the optimized conditions, the calibration curve of Fe(II) ion was linear over the range from 1.0×10-7 to 2.0×10-5 M with correlation coefficient of 0.996. The detection limit was calculated to be 4.0×10-8 M.
Objectives: The aims of this study are to investigate how X-rays are emitted to surrounding parts during the ion implantation process, to analyze these emissions in relation to the properties of the ion implanter equipment, and to estimate the resulting exposure dose. Eight ion implanters equipped with high-voltage electrical systems were selected for this study. Methods: We monitored X-ray emissions at three locations outside of the ion implanters: the accelerator equipped with a high-voltage energy generator, the impurity ion source, and the beam line. We used a Personal Portable Dose Rate and Survey Meter to monitor real-time X-ray levels. The SX-2R probe, an X-ray Features probe designed for use with the RadiagemTM meter, was also utilized to monitor lower ranges of X-ray emissions. The counts per second (CPS) measured by the meter were estimated and then converted to a radiation dose (𝜇Sv/hr) based on a validated calibration graph between CPS and μGy/hr. Results: X-rays from seven ion implanters were consistently detected in high-voltage accelerator gaps, regardless of their proximity. X-rays specifically emanated from three ion implanters situated in the ion box gap and were also found in the beam lines of two ion implanters. The intensity of these X-rays did not show a clear pattern relative to the devices' age and electric properties, and notably, it decreased as the distance from the device increased. Conclusions: In conclusion, every gap, in which three components of the ion implanter devices were divided, was found to be insufficiently shielded against X-ray emissions, even though the exposure levels were not estimated to be higher than the threshold.
본 연구에서는 연안오염총량관리가 시행되고 있는 시화호 유역에서 비점오염 형태로 유입되는 중금속 유출 특성, 오염도 및 위해성을 평가하기 위하여 반월 스마트 허브(산업단지)에 위치한 강우유출수 내 용존성과 입자성 중금속(Co, Ni, Cu, Zn, Cd 및 Pb)을 조사하였다. 용존성 Co와 Ni은 강우초반에 농도가 높고 이후 감소하는 경향을 보였으나, 나머지 용존성 중금속과 입자성 중금속은 강우량 증가에 따라 농도가 큰 폭으로 증가하는 경향을 보였다. 총 중금속 중 입자성 중금속이 차지하는 상대적인 비율은 Pb이 97.2%로 가장 높고 Cu>Cd>Co>Zn>Ni순이었으며, 입자-용존 분배계수($K_d$) 결과는 강우유출수 내 존재하는 Pb는 다른 중금속에 비해 빠르게 입자형태로 제거되는 것으로 나타났다. 본 연구를 통해 1일의 강우 이벤트 동안 2개의 토구를 통해 유출되는 총 중금속의 유출량은 Co 2.21 kg, Ni 30.5 kg, Cu 278.3 kg, Zn 398.3 kg, Cd 0.39 kg 및 Pb 40.0 kg로 나타났다. 연안오염총량관리제도가 시행되고 있는 시화호의 유역면적, 연간 강우량 등을 고려할 때 막대한 양의 중금속이 비점오염의 형태로 시화호로 유입되고 있음을 알 수 있었다. 무엇보다 강우유출수 내 용존성 Ni, Cu 및 Zn의 평균농도는 급성 독성을 나타내는 수질기준(급성 단기기준)를 초과하고 있으며, 입자성 중금속 역시 모든 원소가 배경농도에 비해 농축도(오염도)가 매우 높고, 국내 퇴적물 관리기준(PEL)을 큰 폭으로 초과하고 있어, 주변 해역 환경 및 생태계에 악영향을 미칠 것으로 판단된다.
본 연구에서는 시화호 외측 해역 주상 퇴적물 내 미량금속의 수직분포 특성과 오염도를 평가하였다. LNG 기지 인근에서 상대적으로 높은 미량금속 농도를 보였으며, 퇴적물 주상퇴적물 내 미량금속의 평균농도는 Cr 58.8 mg/kg, Co 10.3 mg/kg, Ni 22.8 mg/kg, Cu 18.1 mg/kg, Zn 74.0 mg/kg, As 6.75 mg/kg, Cd 0.14 mg/kg, Pb 27.4 mg/kg, Hg 0.026 mg/kg 이었다. 시화호 외측 퇴적물 내 Cu, Zn, As, Cd의 평균 농축계수는 1.5를 초과하여 인위적인 오염이 있었음을 시사하고 있었다. 농집지수를 이용한 결과, 대부분의 미량금속 원소가 오염되지 않은 것으로 나타났으나 LNG 기지 인근인 정점 C, D, E에서 Cu 및 Hg의 농집지수가 1을 초과하고 있어 약간 오염된 결과를 보였다. LNG 기지 인근지역에서 일부 미량금속이 약간 오염된 결과를 보였으나, 측정된 모든 미량금속이 입도 보정이 가능한 Al과 매우 양호한 양의 상관성을 나타내고 있어 시화호 외측 퇴적물 내에서 미량금속 농도는 오염원의 영향보다는 퇴적물의 입도에 큰 영향을 받고 있는 것을 알 수 있었다. 국내 퇴적물 기준인 주의기준과 관리기준과의 비교를 통하여 시화호 외측에서의 퇴적물 내 미량금속 농도는 대부분 저서생물에 영향을 주지 않는 안전한 농도임을 알 수 있었다. 그러나 Cr과 Cu는 외국의 주의기준(TEL) 기준을 초과하고 있어 주의가 필요할 것으로 생각된다.
본 연구에서는 artificial mussel(AM)을 우리나라 해양환경에 처음으로 활용하여 수환경 내 중금속 오염도를 모니터링 하였다. 조사지역으로는 특별관리해역인 시화호 내측 5개 정점을 선정하였으며, AM과 홍합(Mytilus edulis)을 총 12주간 이식실험을 진행함으로써, AM과 홍합 내 지역 및 시간에 따른 중금속(Cd, Cr, Cu, Pb 및 Zn)의 오염도 및 농축특성에 대하여 조사하였다. AM과 홍합 모두 시간에 따라 농도가 증가하였으며, Zn의 축적이 다른 중금속 원소에 비해 높았다. Cd, Cu 및 Pb는 AM과 홍합간 유의한 상관성을 보였으나, Cr과 Zn는 상관성이 없는 것으로 나타났다. 해수 중 용존 중금속과 AM 및 홍합 내 중금속 간의 상관분석결과, Cd, Cu 및 Zn는 홍합보다 AM과 상대적으로 좋은 상관성을 보이고 있는 것으로 나타났다. 12주의 이실실험 후 AM이 홍합에 비해 뚜렷한 지역적 차이를 보이고 있어 해수 중 용존 중금속 농도를 직접적으로 반영하고 있음을 알 수 있었다. 따라서 AM은 우리나라 해양환경의 시 공간적인 중금속 오염도 연구에 모니터링 도구로 사용가능하며, 물리, 화학적인 요인에 적은 영향을 받으므로, 담수를 포함한 다양한 수 환경 중금속 오염 연구에 활동도가 매우 높을 것으로 기대된다.
익산지역의 지하수 유동계를 평가하기 위한 수리지질학적 모델링이 수행되었다. 연구지역의 범위는 $790km^2$이다. 본 지역의 지질은 쥬라기의 대보화강암과 편마상화강암 그리고 선캠브리아기의 변성암으로 구성되어 있다. 채수량은 편마상화강암지역에서 가장 높으며 이는 10km내지 25m두께의 비교적 두껍게 발달된 풍화대 때문이다. 본 모델 시뮬레이션에는 콜로라도 주립대학의 유한차분법모델이 사용되었다. 본 모델은 불균일한 격자간격을 가지며, 28행과 31열로 이루어져 있다. 본 모델은 정류상태와 부정류상태에서 보정되었다.. 정류상태 시뮬레이션의 결과를1985년 9월의 수위등고선과 비교하여 투수율과 우기의 순충전률을 결정하였다. 부정류상태 시뮬레이션은 지하수 채수에 따른 대수층의 반응을 알기 위한 것이다. 부정류상태를 보정에서는 1986년5월의 수위등고선과 맞춤으로서 비산출율의 크기와 분포 그리고 건기의 채수량과 충전량을 결정하였다. 보정된 모델을 이용하여 1985년 10월부터 1995년 9월까지의 지하수채수 및 자연적인 충전에 의한 지하수위변동을 예측하여 보았다. 보정된 모델은 광역적인 지하수개발계획에 이용될 수 있다. 그러나 국부적인 지하수위변동을 예측하는데는 이용될 수 없다.
본 연구는 초당 2개의 속도로 이송되는 사과를 대상으로 측정된 투과 에너지 스팩트럼 데이터를 이용하여 사과의 당도예측 모델을 개발하기 위해 각종 전처리가 당도 예측 모델의 정밀도에 미치는 영향을 구명하고, 신뢰성이 높은 당도 예측 회귀 모델을 개발하기 위해 수행되었다. 스펙트럼의 산란 보정, 노이즈 감소 등을 위해 1차미분, MSC, SNV, OSC 및 이들 조합으로 구성된 전처리 알고리즘을 프로그래밍하고, 이들 전처리를 스펙트럼데이터에 적용한 결과 특히 MSC SNV에 의해 각 파장에서의 투과에너지와 당도와의 상관관계가 전처리를 하지 않은 경우에 비해 현저히 증가하였다. 각종 전처리를 수행한 후 당도 예측 회귀 모델을 개발하고, 검정한 결과, 전처리 방법에 따라 예측모델의 SEP가 최대 1.265%brix 에서 최소 0.507%brix로 큰 차이를 나타내었다. 이는 SEP를 최소화하기 위해 주어진 스펙트럼 데이터의 특성에 알맞는 전처리 방법이 개발 또는 선택되어야 함을 의미한다. MSC 와 SNV는 예측 정밀도와 밀접한 관계가 있으며, OSC는 PLS의 factor 수와 관계되는 것으로 판단되었다. 1차미분은 오히려 모델의 예측 성능을 저하시키는 것으로 나타났다. 이는 실시간으로 측정된 투과스펙트럼에 상대적으로 노이즈 성분이 많이 포함되어 이들 성분이 미분에 의해 강조된 것으로 판단되었다. 본 연구에 사용된 스펙트럼 데이터의 경우 MSC와 OSC 전처리를 수행한 당도예측모델이 $R^2=0.8823$, SEP=0.5071%brix, bias=0.0327로 가장 우수하였다.
고도로 산업화가 진행됨에 따라 회전기계는 더욱 중요시되고 있으며 이의 성능 향상에 부단한 노력이 경주되고 있다. 특히 우주 시대의 개막과 더불어 우주선 및 인공위성에 사용하기 위해 초소형이며 초고속의 고성능회전모타 를 개발하기에 이르렀다. 한 예로서 미국립항공우주국(NASA)의 스페이스셔 틀에 사용되는 주엔진 터보펌프를 들 수 있는데 이 터보펌프는 접시만한 크 기로써 71000마력을 생성해 낸다. 이러한 가공할 만한 에너지 밀도와 유량을 감당해 내려면 종래의 회전기계보다는 훨씬 더 높은 회전속도를 가져야 한 다. 이러한 회전체는 큰 관성부하와 진 동 및 동안정성의 문제등을 내포하고 있다. 고성능 회전기계의 또다른 예로서 초정밀 가공용 공작기계를 들 수 있 다. 선반 혹은 밀링머신으로 초정밀가공을 행하기 위해서는 회전축의 진동이 극히 작아야 한다. 이와 같이 오늘날 갈수록 초고성능 초정밀도를 추구함에 있어서 회전축의 진동을 현장에서 모니터링하고 이 진동데이터를 분석하여 회전축을 제어하는 것이 강력히 요구되어진다. 따라서 in-situ 측정이 중요성 을 띠게 되었는데 이는 제어기술의 바탕이 되는 자료를 현장에서 제공할 수 있기 때문이다. 회전축 진동측정의 대상이 되는 것들은 모타, 발전기, 엔진 및 터빈등을 대표적으로 들 수가 있다. 여기서 소형회전기계의 축표면과 같 이 비교적 곡면을 이루고 있는 부분의 진동변위 측정에 신중한 고려가 요구 되어 진다. 이는 축의 곡면도에 따라 감도가 변화하기 때문이다. 따라서 평 판에 대한 calibration 챠트를 회전기계축진동 변위환상에 이용하면 곡률에 따라서 오차가 생기게 된다. 본 연구에서는 비접촉 축진동측정시 발생되는 오차에 대하여 검토하고자 한다. from the studies, the origin of ${\alpha}$$_1$peak was attributed to the detrapping process form trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of carriers from the shallow trap with 0.
Purpose : The aim of this study is to conform the possibility of the liquid type EPID as a QC tools to clinical indication and of replacement of the film dosimetry. Aditional aim is to describe a procedure for the use of a EPID as a physics calibration tool in the measurements of radiation beam parameters which are typically carried out with film. Method & Materials : In this study we used the Clinac 2100c/d with EPID. This system contains 65536 liquid-filled ion chambers arranged in a $256{\times}256$ matrix and the imaging area is $32.5{\times}32.5cm$ with liquid layer thickness of 1mm. The EPID was tested for different field sizes under typical clinical conditions and pixel values were calibrated against dose by producing images using various thickness of lead attenuators(lead step wedge) using 6 & 10MV x-ray. We placed various thickness of lead on the table of linear accelerator and set the portal vision an SDD of 100cm. To acquire portal image we change the field size and energy, and we recorded the average pixel value in a $3{\times}3$ pixel region of interest(ROI) at field center was recorded. The pixel values were also measured for different field sizes in order to evaluate the dependence of pixel value on x-ray energy spectrum and various scatter components. Result : The EPID, as a whole, was useful as a QA tool and dosimetry device. In mechanical check, cross-hair centering was well matched and the error was less than ?2mm and light/radiation field coincidence was less than 1mm also. In portal dosimetry the wider the field size the the higher the pixel value and as the lead thickness increase, the pixel value was exponentially decreased. Conclusions : The EPID was very suitable for QA tools and it can be used to measure exit dose during patients treatment with reasonable accuracy. But when indicate the EPID to clincal study deep consideration required
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.