• Journal of Acupuncture Research
• /
• 제25권2호
• /
• pp.139-149
• /
• 2008

Objectives : The 7-zone-diagnostic system is a diagnostic device to predetermine bodily locations by measuring the energy of body. This study was to investigate the relation between the different patterns of Zone 2, 6 of Factor AA in VEGA DFM 722(VEGA, Germany), 7-zone-diagnostic system and clinical parameters. The purpose of this study was relation Korean traditional medicine and western medicine with the data from 7-zone-diagnostic system and the clinical parameters. Methods : This study was carried out with the data from some clinical parameters. We made two groups according to the Factor AA patterns of VEGA DFM 722. The Factor AA pattern of Group A is that the red bar graph of zone 2 was higher than the normal range and the red bar graph of zone 6 was lower than the normal range. The Factor AA pattern of Group B was that the red bar graph of zone 2 was lower than the normal range and the red bar graph of zone 6 was higher than the normal range. After the data from clinical parameters to correspond with conditions of each group were selected, the data from clinical parameters between each gropus analyzed statistically. Results and Conclusions : The values of Direct Bilirubin, GOT, BUN and BUN/Creatinine ratio of Group A were higher than them of Group B. The values of Sodium and Tyroxine of Group A were lower than them of Group B. These results mean that Group A has low energy but has increading tendency. To conclude, it is thought that the red bar graph of zone 2 is higher, the group is the more increasing and the red bar graph of zone 6 is lower, the group has the lower energy.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.529-540
• /
• 2014

In this research, a drop impact analysis of a fuel assembly in a research reactor is carried out to determine whether the fuel plate integrity is maintained in a drop accident. A fuel assembly drop accident is classified based on where the accident occurs, i.e., inside or outside the reactor, since each occasion results in a different impact load on the fuel assembly. An analysis procedure suitable for each drop situation is systematically established. For an accident occurring outside the reactor, the direct impact of a fuel assembly on the pool bottom is analyzed using implicit and explicit approaches. The effects of the key parameters, such as the impact velocity and structural damping ratios, are also studied. For an accident occurring inside the reactor, the falling fuel assembly may first hit the fixing bar at the upper part of the standing fuel assembly. To confirm the fuel plate integrity, a fracture of the fixing bar should be investigated, since the fixing bar plays a role in protecting the fuel plate from the external impact force. Through such an analysis, the suitability of an impact analysis procedure associated with the drop situation in the research reactor is shown.

• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.459-469
• /
• 2020

An external prestressed steel-bar truss unit was developed as a new strengthening technology to enhance the seismic performance of an in-plane masonry wall structure while taking advantage of the benefits of a prestressed system. The presented method consists of six steel bars: two prestressed vertical bars to introduce a prestressing force on the masonry wall, two diagonal bars to resist shear deformation, and two horizontal bars to maintain the configuration. To evaluate the effects of this new technique, four full-scale specimens, including a control specimen, were tested under combined loadings that included constant-gravity axial loads and cyclic lateral loads. The experimental results were analyzed in terms of the shear strength, initial stiffness, dissipated energy, and strain history. The efficiency of the external prestressed steel-bar truss unit was validated. In particular, a retrofitted specimen with an axial load level of 0.024 exhibited a more stable post behavior and higher energy dissipation than a control specimen with an observed complete sliding failure. The four vertical bars of the adjacent retrofitting units created a virtual column, and their strain values did not change until they reached the peak shear strength. The shear capacity of the masonry wall structure with external prestressed steel-bar truss units could be predicted using the model suggested by Yang et al.

• 산업식품공학
• /
• 제14권2호
• /
• pp.127-134
• /
• 2010

압출성형의 이점을 활용하여 영양적으로 단백질과 식이섬유가 풍부하며 조직감과 항산화 활성이 우수한 에너지바를 제조하기 위해서 탈지 삼종실 압출성형물의 팽화율, 밀도, 파괴력, 겉보기탄성계수, 수분흡착지수와 수분용해지수, 페이스트 점도를 측정하였다. 또한 압출성형물의 항산화활성을 측정하기 위해 DPPH에 의한 전자공여능을 측정하여 비교 분석하였다. 탈지 삼종실 에너지바 제조 후 품질특성 조사를 위해 수분함량, 색도, 관능검사를 측정하였다. 압출성형 공정변수는 수분함량(20, 25%), 배럴온도(110, 130$^{\circ}C$)이였으며 수분함량 20%, 배럴온도 130$^{\circ}C$에서 팽화율이 가장 높았으며 밀도, 파괴력, 탄성계수가 낮았다. 수분함량이 증가할수록 수분흡착지수가 증가하였으며 수분용해지수는 배럴온도 130$^{\circ}C$에서 높은 경향을 나타내었다. 압출성형 탈지 삼종실은 페이스트 점도 값이 낮게 나타났으며 DPPH에 의한 전자공여능 값은 수분함량 20%, 배럴온도 130$^{\circ}C$ 에서 항산화활성이 높게 나타났다. 탈지 삼종실 에너지바 제조 30일 후에 수분함량은 0.60-1.13% 상승하였으며 백색도와 황색도는 감소, 적색도는 증가하는 경향을 보였다. 관능평가 결과 압출성형 변수가 수분함량 20%, 배럴온도 130$^{\circ}C$이며 탈지 삼종실이 첨가된 에너지바가 가장 좋게 평가되었다. 결론적으로 압출성형을 이용하여 삼종실을 첨가한 에너지바를 제조할 수 있었으며 중간소재인 압출성형물의 공정 변수는 수분함량 20%, 배럴온도 130$^{\circ}C$에서 가장 좋은 조건으로 판단되었다.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.943-956
• /
• 2017

Purpose: This paper proposes a VSS(Variable Sample Size) ${\bar{X}}$ control chart using surrogate variable and shows its effectiveness compared with FSS(Fixed Sample Size) ${\bar{X}}$ control chart using either performance variable or surrogate variable. Methods: The expected cost function of VSS ${\bar{X}}$ control chart is derived. The optimal designs are then found for numerical examples using a GA(genetic algorithm) and compared to those of the FSS ${\bar{X}}$ control charts. Results: Computational results show that VSS ${\bar{X}}$ control chart using surrogate variables is superior to FSS ${\bar{X}}$ control chart using either performance variable or surrogate variable from the economic view points. Conclusion: The proposed VSS ${\bar{X}}$ control chart will be useful in industry fields where a performance variable is not avaliable or too costly.

• 한국주조공학회지
• /
• 제33권4호
• /
• pp.157-161
• /
• 2013

A ribbon-type polycrystalline silicon wafer was directly fabricated from liquid silicon via a novel technique for both a fast growth rate and large grain size by exploiting gas pressure. Effects of processing parameters such as moving speed of a dummy bar and the length of the solidification zone on continuous casting of the silicon wafer were investigated. Silicon melt extruded from the growth region in the case of a solidification zone with a length of 1cm due to incomplete solidification. In case of a solidification zone wieh a length of 2 cm, on the other hand, continuous casting of the wafer was impossible due to the volume expansion of silicon derived from the liquid-solid transformation in solidification zone. Consequently, the optimal length of the solidification zone was 1.5 cm for maintaining the position of the solid-liquid interface in the solidification zone. The silicon wafer could be continuously casted when the moving speed of the dummy bar was 6 cm/min, but liquid silicon extruded from the growth region without solidification when the moving speed of the dummy bar was ${\geq}$ 9 cm/min. This was due to a shift of the position of the solid-liquid interface from the solidification zone to the moving area. The present study reports experimental findings on a new direct growth system for obtaining silicon wafers with both high quality and productivity, as a candidate for an alternate route for the fabrication of ribbon-type silicon wafers.

• 상하수도학회지
• /
• 제34권3호
• /
• pp.221-230
• /
• 2020

In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3 bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/㎥ of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.

• 대한지역사회영양학회지
• /
• 제24권6호
• /
• pp.485-496
• /
• 2019

Objectives: This study was conducted to investigate the effect of a 6-week low-calorie diet (LCD) program including high protein-low carbohydrate protein bar on weight loss, blood pressure, and blood lipid profile in 40 overweight women according to dietary compliance. Methods: Subjects were 62 healthy overweight women (BMI ≥ 23.0 or body fat percentage ≥ 28%), aged 20~59 yrs who were provided a high protein-low carbohydrate protein bar (each 35 g, 154 kcal, protein energy %: 28.6%, carbohydrate energy %: 38.7%) as part of dinner for 6 weeks. Forty subjects who completed the whole diet program were categorized into high compliance (HC) group (days of eating protein bar ≥ 5 weeks) or low compliance (LC) group (days < 5 weeks). Results: Energy intake significantly decreased from 1,867.5 kcal at baseline to 1,137.4 kcal at 6 weeks for the HC group and from 1,971.7 kcal to 1,362.2 kcal for the LC group, respectively. On the other hand, a significant increase in protein energy percentage was observed in each group (HC group: 3.5%, LC group: 2.2%). Both groups showed significant decreases in weight (HC group: 1.8 kg, LC group: 1.1 kg), BMI, fat mass, systolic blood pressure, total cholesterol, and LDL-cholesterol. Reduction of body fat percentage and diastolic blood pressure were only observed in the HC group. Conclusions: The inclusion of a high protein-low carbohydrate protein bar as part of a low-calorie diet for a short period can be effective to achieve weight loss and concomitantly improve blood cholesterol level without serious physiological side effects. More evident results can be achieved by eating a diet with low calorie diet including high protein-low carbohydrate protein bar for more than 5 weeks.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.209-217
• /
• 1994

The present study is concerned with the characteristics of the high speed precision bar cropping. This process is a practical application of High Energy Rate Forming in which the impact energy source is given by internal combustion engine. To enhance the added value of product, the recent forging fields trend toward the near net shape processes through the cold and closed die forging. For the purpose of these processes the precedent process is to obtain the precision billet which has little weight deviation and defect. The accuracy of initial billet by bar cropping depends upon the process parameters and die design technology. Therefore, in order to investigate the effect of process parameters upon product quality, the cropping experiments are carried out according to the various parameters such as billet clearence, billet length, billet material, cropping speed and so on. From these results some criteria of the optimal die design for the product of good quality are suggested.

• Advances in Energy Research
• /
• 제8권4호
• /
• pp.265-273
• /
• 2022

In this study, a product gas yield and carbon conversion were measured during the coal pyrolysis. The pyrolysis process occurred under two different atmospheres such as subcritical (45 bar, 10℃) and supercritical CO₂ condition (80 bar, 35℃). Under the same pressure (80 bar), the atmosphere temperature increased from 35℃ to 45℃ to further examine temperature effect on the pyrolysis at supercritical CO₂ condition. For all three cases, a power input supplied to heating wire placed below coal bed was controlled to make coal bed temperature constant. The phase change of CO₂ atmosphere and subsequent pyrolysis behaviors of coal bed were observed using high-resolution camcorder. The pressure and temperature in the reactor were controlled by a CO₂ pump and heater. Then, the coal bed was heated by wire heater to proceed the pyrolysis under supercritical CO₂ condition.