• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.255-262
• /
• 2016

Effects of $SiO_x$ or C shells on electrochemical properties of Si nanoparticles were investigated. $SiO_x$ shells with thickness of 10~15 nm were formed on homogeneously crystalline Si nanoparticles. Incase of Si-C nanoparticles, there were 30~40 layers of C with a number of defects. Li-ion batteries were fabricated with the above-mentioned nanoparticles, and their electrochemical properties were measured. Pristine Si shows a high IRC (initial reversible capacity) of 2,517 mAh/g and ICE (initial columbic efficiency) of 87%, but low capacity retention of 22%, respectively. $SiO_x$ shells decreased IRC (1,534 mAh/g) and ICE (54%), while the retention increased up to 65%, which can be explained by irreversible phases such as $LiO_2$ and $Li_2SiO_3$. C shells exhibited no differences in IRC and ICE compared to the pristine Si but an enhanced retention of 54%, which might be from proper defect structures.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.66-73
• /
• 2015

Background: A numerical simulation was carried out to investigate the difference between internal and external heat-flux distributions at the reactor vessel wall under in-vessel retention through external reactor vessel cooling (IVR-ERVC). Methods: Total loss of feed water, station blackout, and large break loss of coolant accidents were selected as the severe accident scenarios, and a transient analysis using the element-birth-and-death technique was conducted to reflect the vessel erosion (vessel wall thickness change) effect. Results: It was found that the maximum heat flux at the focusing region was decreased at least 10% when considering the two-dimensional heat conduction at the reactor vessel wall. Conclusion: The results show that a higher thermal margin for the IVR-ERVC strategy can be achieved in the focusing region. In addition, sensitivity studies revealed that the heat flux and reactor vessel thickness are dominantly affected by the molten corium pool formation according to the accident scenario.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.2
• /
• pp.49-55
• /
• 2017

Recently climate change and urbananization have been increased surface runoff, resulting in flooding. Retention basins have been constructed to control urban flooding by reducing peak flow rate. Recently, the retention basin plays a role in controlling combined sewer overflows (CSOs) as well as urban flooding. In this study, the retention basin with a rotatable bucket was suggested and scale down experiments was performed for the optimum design of the retention basin. Scaled down model was produced using a 3D printer after it was designed as law of similarity. Two times for operating a rotary bucket is required to sweep out the sediments deposited on the bottom of the basin. Optimized dimensions for the retention basin were width of 5 m, height of 5 m, bucket radius of 0.5 m, and bottom slope of 5.0 %. It can be concluded that the results obtained from this study can be used to design the retention basin with a rotatable bucket which does not require energy to operate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.5
• /
• pp.720-726
• /
• 2006

In an attempt to develop an artificial diet for growing olive flounder (Paralichthys olivaceus), weight gain, feed utilization and nutrient retention were investigated in fish fed moist (MP), semi-moist (SMP) and extruded pellets (EP). Excretion of nitrogen and phosphorus was also estimated based on their whole body gain and intake. EP and MP composed of raw fish and SMP made of formulated powder feed with water were prepared to have the same energy contents on a dry matter basis. A total of 240 fish with an average initial weight of 120 g were randomly distributed to each (20 fish/tank) of 12 circular plastic tanks (4 tanks/treatment) and fed experimental diets for 8 weeks. Fish groups fed EP (209 g) or SMP (209 g) recorded higher final weight than those fed MP (176 g), while dry feed consumption was highest in SMP groups (106 g), followed by MP (71 g) and EP groups (62 g). As a consequence, fish groups fed EP showed much lower feed conversion ratio than the other two groups. Protein efficiency ratio was also significantly higher in fish groups fed EP (2.55) than in those fed MP (1.44) and SMP (1.31). Fish groups fed EP, which showed the highest nitrogen retention of 43.9%, resulted in the lowest excretion of nitrogen of 35.5 g per kg gain. Also, the lowest phosphorus excretion of 6.0 g per kg gain was found in the EP groups with the highest P retention (37.0%) among treatments. Although the EP groups had the lowest dietary energy intake, they retained the highest energy in the whole body among treatments. The present results showed that EP could be more advantageous than MP or SMP in terms of growth, feed utilization and excretion of nitrogen and phosphorus for olive flounder.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1787-1793
• /
• 2018

The power conversion efficiency of perovskite solar cells has reached 23.3%. Although significant developments have been made through intensive studies, the stability issue is still challenging. Passivation of perovskite solar cells with a transparent polymer provides better stability; however, there are a few disadvantages of organic polymer such as low thermal stability, weak adhesion and the lack of water retention ability. In this work, we prepared a dual Parylene-F/C layer with 3-methacryloxypropyltrimethoxysilane, A-174, to combine the advantages of organic and inorganic materials. As a result, A-174 treated dual Parylene-F/C layer demonstrated improved passivation effects compared to a single Parylene layer due to the strong binding of Parylene and the water retention ability by $SiO_2$ formed from A-174. This synergetic effects can be expanded to the combination of other organic materials and organosilane compounds.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1265-1268
• /
• 2003

The estimation of retention factors by correlation equations with physico-chmical properties maybe helpful in chromatographic work. The physico-chemical properties were water solubility (S), hydrophobicity (P), total energy ($E_t$), connectivity index 1 ($^1{\chi}$), hydrophilic-lipophlic balance (x) and hydrophilic surface area (h) of isoflavones. The retention factors were experimentally measured by RP-HPLC. Especially, the empirical regulations of water solubility and hydrophobicity were expressed in a linear form. The equation between retention factors and various physico-chemical properties of isoflavones was suggested as $k = a_0 + a_1\;log S + a_2log\;P^Q + a_3(E_t) + a_4(^1{\chi}) + a_5(x) + a_6(h)$, and the correlation coefficients estimated were relatively higher than 0.95. The empirical equations might be successfully used for a prediction of the various chromatographic characteristics of substances, with a similar chemical structure.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.134-137
• /
• 2019

In this paper, the data retention characteristics were analyzed to find out the thickness effect on the trap energy distribution of silicon nitride in the silicon-oxide-nitride-oxide-silicon (SONOS) flash memory devices. The nitride films were prepared by low pressure chemical vapor deposition (LPCVD). The flat band voltage shift in the programmed device was measured at the elevated temperatures to observe the thermal excitation of electrons from the nitride traps in the retention mode. The trap energy distribution was extracted using the charge decay rates and the experimental results show that the portion of the shallow interface trap in the total nitride trap amount including interface and bulk trap increases as the nitride thickness decreases.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.12 no.1
• /
• pp.2-11
• /
• 1983

The solar energy retention rate of a flat plate collector can be increased by increasing water flow rate through the collector which also increases the pumping energy incurred in obtaining that solar energy. The problem of optimal flow rate is formulated to fit within the framework of pontryagin's maximum principle and with a few simplifying assumptions, an optimal solution that can be easily implemented is obtaincd, The optimal solution is used in the simulation of a solar heating system using actual climatological data and the results are compared with that of on-off control. The result that not only the object function but, In some cases, also the solar energy retention rate the collector is increased. In is also found that the optimal control gets more advantageous as the solar insolation level gets lower, and also as tile cost of auxiliary heating fuel gets higher.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.468-473
• /
• 2010

The purpose of this study is to derive the correlation between the Specific Phosphorus Release Rate (SPRR), Specific Phosphorus Uptake Rate (SPUR) and Specific Oxygen Uptake Rate (SOUR) at various Sludge Retention Time (SRT) condition in the A/O process. The laboratory scale reactor was operated on various SRT (10 day, 20 day, 30 day, 40 day). In this study, the SPRR, SPUR and SOUR tended to decrease with the SRT increase. Empirical equations was be obtained $y=4.54E-006x^2+0.0007x-0.0315$, $R^2=0.925$ (SOUR vs. SPRR) and $y=3.22E-006x^2+0.0004x-0.0173$, $R^2=0.928$ (SOUR vs. SPUR) from the relationship between SRT, SPRR and SPUR and SOUR. Therefore, the anaerobic tank design based on the research result such as SPRR, SPUR of a phosphorus design and SOUR would be possible.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.125-131
• /
• 2014

In order to increase landfill gas (LFG) production with food waste leachate, this study was confirmed to be acidogenetic conditions for landfill site injection. Thereby, it was conducted for acidogenetic treatments to determine the decrease in viscosity and VFA production. After acidogenesis treatments, solubility of food waste leachate increased approximately 15%, and as a result, UASB and CSTR were similar by reactor type using the change of retention time. Based on the result of the change in viscosity by reactor type, efficiency of UASB showed approximately 11.38% of higher decrease in viscosity as $76.95{\pm}3.27%$ vs. CSTR. Also, VFA production showed the higher increase of 2.01 times (UASB) and 1.76 times (CSTR) respectively at the point of increasing retention time from 3 to 5 days. From the above results, efficiency of UASB in a reactor was relatively higher because large molecular lead to longer retention time than small molecular due to having screen effect in the fixed media.