• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.681-688
• /
• 2016

This study assess their quality of radiation on analysis of the spectrum of resolution suggesting IEC 61267 in radiation quality that RQA3, RQA5, RQA7, RQA9 and combination of clinical condition using several quality of radiation. In experiments edge method first, the spatial resolution assessment used image of the additional filter and SID is obtained the IEC 62220-1, spatial resolution and sharpness of the obtained image was evaluated in the MTF value 10%(0.1), MTF value 50%(0.5) using a Matlab program. Second, MCNPX simulation used spatial resolution analysis was radiation quality particle fluence and spectrum analysis in energy. As a result, make use of additional filter, image quality evaluation of SID that RQA3 radiation quality combination qualification is higher spatial resolution and sharpness make unused of additional filter and SID 100cm. RQA7 radiation quality combination qualification is higher that spatial resolution make unused of additional filter and SID 150cm. RQA9 radiation quality combination qualification is higher that spatial resolution and sharpness make used of additional filter and SID 180cm. spectrum analysis of radiation quality by reducing consequent errors occurring in the experiment that error due to the reproducibility of the X-ray tube, occur in an error of correction the detector suggest ideal conditions from spectrum analysis through MCNPX simulation. In conclusion, by suggesting spatial resolution and sharpness of result for various radiation quality, It provide basic data that radiation quality condition and quantitative assessment method for laboratory in clinical using detector evaluation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.1
• /
• pp.117-117
• /
• 1992

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.649-655
• /
• 2020

This study determined effective educational strategies by investigating and analyzing the related educational demands for SMEs (small and medium-sized enterprises) in the 4th Industrial Revolution based area of smart farms. In order to derive the approprate educational strategies, Importance-Performance Analysis (IPA) and Borich's Needs Assessment Model were conducted based on the smart farm technological field. As a result, the education demand survey showed high demand for production systems and intelligent farm machinery. In detail, Borich's analysis showed the need for pest prevention and diagnosis technology (8.03), network and analysis SW linkage technology (7.83), and intelligent farm worker-agricultural power system-electric energy hybrid technology (7.43). In contrast, smart plant factories (4.09), lighting technology for growth control (4.46) and structure construction technology (4.62) showed low demands. Based on this, the IPA portfolio shows that the network and analysis SW linkage technology and the CAN-based complex center are urgently needed. However, the technology that has already been developed, such as smart factory platform development, growth control lighting technology and structure construction technology, was oversized. Based on these results, it is possible to strategically suggest the customized training programs for industrial sectors of SMEs that reflect the needs for efficiently operating smart farms. This study also provides effective ways to operate the relevant training programs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.117-124
• /
• 2017

A Smart Grid is a system that can efficiently use energy by exchanging real-time information in both directions between a consumer and a power supplier using ICT technology on an existing power network. DR(Demand response) is an arrangement in which electricity users can sell the electricity they save to the electricity market when the price of electricity is high or the power system is crisis. In this study, we developed a power meter data transmission device and power IT system that measure the demand information in real-time using a smart meter and transmit it to a cloud server. The power meter data transmission device developed in this study uses alight sensor connected to a Raspberry Pi 3 to measure the number of blinking lamps on the KEPCO meter per unit of power, in order to provide reliable data without any measurement errors with respect to the KEPCO power data. The power measurement data transmission device uses the standard communication protocol, OpenADR 2.0b. The measured data is transmitted to the power IT system, which consists of the VEN, VTN, and calculation program, via the LTE WiFi communication network and stored in its MySQL DB. The developed power measurement data transmission device issues a power supply instruction and performs a peak reduction DR when a power system crisis occurs. The developed power meter data transmission device has the advantage of allowing the user to adjust it every 1 minute, where as the existing smart metering time is fixed at once every 15 minutes.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.357-365
• /
• 1989

The positional parameters of framework atoms, cations, and water molecules in hydrated and dehydrated $Mg_4Na_4-A$, $Ca_6-A$, $Zn_5Na_2-A$ and $Co_4Na_4-A$ were determined by the optimization technique using some potential energy functions and VAIOA optimization program. Upon dehydration, cations in hydrated states move toward the framework oxygens of 6 rings. Frameworks of fully dehydrated zeolite A are more stable than those of fully dehydrated divalent cation exchanged Zeolite A. There are three different kinds of water molecules in divalent cation exchanged Zeolite A; W(III) (water molecules having hydrogen bonds), W(II) (water molecules associated with $Na^+$ ions), and W(I) (water molecules associated with divalent cations). Three different DTA endothermic peaks were observed corresponding to the dehydration of three different kinds of water molecules in divalent cation exchanged Zeolite A.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1525-1530
• /
• 2005

The purpose of this study is to investigate anti-tumor activities, general composition, elemental composition and mineral contents of fermented liquid stem, root and fruit of Opuntia humifusa. In the general composition, the energy, crude protein, crude lipid and crude carbohydrate contents of fermented liquid stem were 86.21 Kcal, 0.92$\%$, 0.12$\%$, and 20.34$\%$, respectively. Fermented liquid fruit showed 65.32 Kcal, 1.04$\%$, 0.08$\%$, and 15.15$\%$. In mineral analysis, fermented liquid stem and fruit showed 1,800 and 388 mg of calcium per 100g. The ferrous concentrations of fermented liquid stem and fruit were 21 and 10 mg per 100 g, respectively. Methanol, ethanol and water extracts of nonfermented liquid stem and fruit did not inhibit the proliferation in human cervical cancer cells (Caski, SiHa and HaCaT), but the fermented liquid fruit showed the inhibition of Proliferation with dose-response manner in Caski and SiHa cells, but not HaCaT. Therefore, it suggests that fermented cactus may be used as one of potential adjuvant for the treatment of cervical carcinomas.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.431-440
• /
• 2011

The thermal expansion coefficient of epoxy/inorganic additives composites was controlled by changing the amount of the inorganic additives such as talc and fused silica. The epoxy resin comprises hydrogenated bisphenol A (HBA)-based epoxide, difunctional polyglycidyl epoxide (DPE) as a diluent and isophorone-diamine (IPDA) as a crosslinking agent, which was subsequently mixed with inorganic additives (talc and fused silica). The thermal expansion coefficient was decreased by increasing amount of inorganic additives, nearly to fresh granite. Fused silica was more effective than talc in lowering the thermal expansion coefficient. Additionally, lexural and tensile strengths of the composites were getting lower and higher with the amount of the inorganic fillers, respectively. It was thus concluded that an epoxy composite containing inorganic fillers was developed to show much lower thermal expansion coefficient, similar to fresh granite, than the neat epoxy resin, and also proper mechanical strengths for applications.

• Journal of Nutrition and Health
• /
• v.50 no.4
• /
• pp.376-382
• /
• 2017

Purpose: The consistent rise in the number of foreign students in Korea demands an accurate and detailed investigation into their dietary practices and nutritional status. For these international students, assimilation into new cultures can be stressful. The influence this process may have on dietary behaviors as well as overall health cannot be overlooked. Methods: The researchers in this study sought to investigate the nutritional status and dietary practices of Ghanaian students studying in Korea. A total of 81 Ghanaian male students with an average age of $29.4{\pm}4.0years$ were sampled between May and June 2016. Investigations were carried out on the general characteristics of the participants, their daily food and nutrient intakes using a 24-h dietary recall method, meal skipping practices, and the nutritional quality of their diets based on their meal skipping habits. Results: The study revealed that the daily nutrient intake of subjects did not fully meet the daily recommended nutrient intake (RNI) established by Ghanaian Ministry of Health and the World Health Organization (WHO) and Food and Agriculture Organization (FAO), particularly for energy, calcium, iron, zinc, and vitamin B2 requirements. The Nutrient Adequacy Ratio (NAR) for calcium was very low, posing a deficiency risk to the participants. Meal skipping practices among participants changed significantly after arriving in Korea. The study also compared the diet quality indicators (Nutrient Adequacy Ratio and Mean Adequacy Ratio) of those who skipped meals ${\geq}7times/week$ with those who skipped meals < 7 times/week. Participants who skipped meals ${\geq}7times/week$ were shown to have lower dietary intakes of vitamins B1 and B2 than those who skipped meals < 7 times/week. Conclusion: Ultimately, the study found that meal skipping among Ghanaian students was common, and their daily nutrient intakes did not meet the set dietary standards. Those who skipped meals ${\geq}7times/week$ had lower dietary intakes of vitamins B1 and B2 than those who skipped meals < 7 times/week. Based on our study findings, we recommend that nutrition education should be organized for the Ghanaian student community in Korea using our results as a template to draw up a nutrition program that is culturally appropriate.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.217-229
• /
• 2017

This study focuses on the improvement of the working environment in domestic collieries where temperature is increasing due to heat of the earth that is caused by the long-term mining. In order to improve the working environment of the mine, a ventilation evaluation was carried out for Hwasoon Mining Industry. In order to increase the ventilation efficiency of the mine, numerical analysis of the effect on temperature was carried out by using climsim, a temperature prediction program. The analysis shows that A coal mine needs $6,152m^3/min$ for in-flow ventilation rate but the total input air flowrate is $4,710m^3/min$, $1,442m^3/min$ of in-flow ventilation rate shortage. The 93 m hypothetical ventilation shaft from -395 ML to -488 ML could result about $3^{\circ}C$ temperature drop in the coal mine of -488 ML far. As a result of predicting the $CO_2$ concentration at -523 ML development using artificial neural network, the emission of $CO_2$ increased as the amount of coal and coal bed thickness increased. The factors that have the greatest effect on the amount of $CO_2$ emissions were coal layer thickness and coal mining. And, as the air quantity increases, it has a great effect on the decrease of carbon dioxide concentration.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.595-600
• /
• 2016

The diagnostic multileaf collimator(MLC) was designed for patient dose reduction in diagnostic radiography We used monte carlo simulation code (MCNPX, LANL, USA) to evaluate efficiency of shielding material for making diagnostic MLC as preliminary study. The diagnostic radiography unit was designed using SRS-78 program according to tube voltage (80,100,120 kVp) and acquired energy spectrums. The shielding material was SKD11 alloy tool steel that is composed of 1.6% carbon(C), 0.4% silicon(Si), 0.6% manganese (Mn), 5% chromium (Cr), 1% molybdenum(Mo) and vanadium(V). The density of it was $7.89g/cm^3$.Using tally card 6, we calculated the shielding efficiency of MLC according to tube voltage. The results was that 98.3% (80 kVp), 95.7 %(100 kVp), 93.6% (120 kVp). We certified efficiency of diagnostic MLC fabricated from SKD11 alloy steel by monte calro simulation. Based on the results, we designed the diagnostic MLC and will develop the diagnostic MLC for reduction of patient dose in diagnostic radiography.