• Genomics & Informatics
• /
• v.1 no.2
• /
• pp.75-79
• /
• 2003

Every protein can be characterized by either a distinct motif or a combination of motifs. Nevertheless, little is known about the relationships among (more than two) the motifs. Some of the proteins in the world are share motifs for evolutional or other biological benefits - they can save energy, time and resource for controlling and managing a variety of proteins. In some cases of motifs, the tendency is quite common and they can act the 'hub' motif of a network of the motif associations. The hubs are structurally and functionally important in themselves and also important in disease-related mutations. They will be highly resistant mutation to conserve their functions. But, in case of the a rare mutation, mutations on the position of hub can more easily cause fatal diseases.

• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.33-42
• /
• 2012

In the present study, CFD is employed to investigate phenomena occurring during a process of thermal stratification in U-bent pipes at transitional Reynolds number. URANS evaluation had been chosen for its low computational costs during transient analysis and for the evaluation of modeling performance in these conditions. Application of CFD at transitional Reynolds number and buoyancy driven flows indeed contains deeper uncertainties in relation to the range of applicability for hydrodynamic and thermal models. The methodology applied in the work points out, through validations with the basic problems constituting the complex stratified phenomenon, the applicability of the current turbulence modeling. Accurate predictions have been found in relation to transitional Reynolds number in bent pipes and region of stability induced by the gravitational field. On the other hand the defects introduced in the unstable region of the U bent pipe, are discussed in relation to the adopted modeling.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.809-815
• /
• 1998

This study has been performed to investigate MRR(metal removal rate) surface roughness with various pulse-on duration using the copper and graphite electrode according to the electrode size on the heat treated STD 11 which is extensively used for metallic molding steel in the EDM. The results obtained are as follow ;a)MRR increases a lot when pulse-on duration is 100 $\mu{s}$ or less but MRR has little difference with pulse-on duration of 100 $\mu{s}$ or more b) According to the increase of Pulse-on duration the large the electrode size the more MRR c) Safe discharge is needed to make maximum of MRR and the metallic organization must be complicated for discharge induction. d) Actual machining time is longer than theoretical machining time at the short pulse-on duration because of skin effect of current. e) Graphite electrode needs the larger electric discharge energy than copper electrode to remove remained chips completely.

• Journal of Korea Multimedia Society
• /
• v.20 no.7
• /
• pp.1046-1053
• /
• 2017

We propose a design method of high accuracy power measuring device and the method of securing the reliability of the measured data. As a design method for the development of the high accuracy power measuring device, the circuit was made by reflecting the high accuracy power measuring ICs and the CT (Current Transformer). To ensure the reliability of the power meter, we requested to the watt-hour meter certified testing organization to measure the error rate, and the error rate of active power based on the "Wattmeter Technical Standard(Revision notify 2014-283)" was measure, and the error rate was confirmed to be less than 0.1%.

• Journal of Nutrition and Health
• /
• v.1 no.1
• /
• pp.49-51
• /
• 1968

The Calorie allowances for a reference man (25 years, 60kg, moderate work) and a reference woman (25 years, 52kg, moderate work) were given by the formulae which were recommended by the Food and Agricultural Organization(FAO). E=152 W 0.73 3,000 Calories(man) E=123.4 W 0.73 2,200 Calories (woman) The appropriate adjustments were made for age, body weight (Table 1) and activity (Table 2) of adults other than a 'reference man' and 'reference woman' based on our report of 'Studies of Basal Metabolism and Energy Expenditure of Koreans in Daily Life' supported partly by the U.S. Department of Agriculture. The recommendation of FAO for the calorie requirements for children, the additional allowances for pregnancy, lactation and environmental temperature were adopted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.933-937
• /
• 2007

대형 무선 센서 네트워크(WSNs)는 일반적으로 수백에서 수천 개의 센서 노드들로 구성되어 있다. 이러한 대형 WSNs에서는 네트워크의 수명연장을 위해서 비용 및 에너지를 고려한 에너지 효율성뿐만 아니라 네트워크의 유지 및 관리가 요구된다. 사용자는 효율적인 시스템을 통해서 사용자 수준의 센싱 서비스 품질이 제공받을 수 있어야 한다. 이 네트워크에서 사용자에게 제공되는 결과 데이터의 품질은 이벤트 검출에 관련된 센서들의 개수가 결정적인 역할을 한다. 그러므로 사용자 요구품질에 적합한 QoS를 제공할 수 있는 네트워크 프로토콜은 일부 센서 노드들에서 고장이 발생하더라고 전체 시스템 성능에 영향을 주지 않으면서, 동시에 에너지 소비가 최소화되도록 설계되어야 한다. 본 논문에서 제안된 프로토콜은 LEACH(Low Energy Adaptive Clustering Hierarchy) 프로토콜을 기반으로 하며, 지속적인 감시가 요구되는 대형 네트워크에 적합한 역할 기반의 자가 구성 프로토콜을 제안하였다.

• Journal of Sensor Science and Technology
• /
• v.11 no.4
• /
• pp.191-199
• /
• 2002

This paper presents the design concept, theoretical investigation, and fabrication of a six-degree of freedom (6-DOF) turbulent flow micro sensor utilizing the piezoresistive effect in silicon. Unlike other flow sensors, which typically measure just one component of wall shear stress, the proposed sensor can independently detect six components of force and moment on a test particle in a turbulent flow. By combining conventional and four-terminal piezoresistors in Si (111), and arranging them suitably on the sensing area, the total number of piezoresistors used in this sensing chip is only eighteen, much fewer than the forty eight piezoresistors of the prior art piezoresistive 6-DOF force sensor.

• Electrical & Electronic Materials
• /
• v.11 no.11
• /
• pp.37-45
• /
• 1998

In this paper, present status of super high-efficiency tandem solar cells has been reviewed and key issues for realizing super high-efficiency have also been discussed. In addition, the terretrial R&D activities of tandem cells, in the New Sunshine Program of MITI(Ministry of International Trade and Industry) and NEDO(New Energy and Industrial Technology Development Organization) in Japan are reviewed briefly. The mechanical stacked 3-junction cells of monolithically grown InGaP/GaAs 2-junction cells and InGaAs cells have reached the highest efficiency achieved in Japan of 33.3% at 1-sun AM1.5. This paper also reports high-efficiency InGaP/GaAs 2-junction solar cells with a world-record efficiency of 26.9% at AM0, 28$^{\circ}C$ and radiation damage recovery phenomena of the tandem cell performance due to minority-carrier injection under light illumination or forward bias, which causes defect annealing in InGaP top cells. Future prospects for realizing super-high efficiency and low-cost tandem solar cells are also described.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1297-1302
• /
• 2008

Environmental conferences in international society have held on Rio de Janeiro from UNCED in 1992 upward (United Nations Conference on Environment and Development) for countermeasure of environmental matters. Developed countries like United States, Japan, Canada and British are to take effect building performance certification criteria what is certification system of environment for promotion in aspects of eco-friendly buildings. Purposes of this study are research in standards and status of certification systems which are LEED in USGBC since 1993 in United States, GBCC of KGBC in state-run organization since 2002 and 'Environmental-friendly Building Guidelines' of Seoul to be recently driven. And then, offer proposals of promotion aims for revitalization in GBCC.

• Nuclear Engineering and Technology
• /
• v.42 no.3
• /
• pp.237-248
• /
• 2010

The safety of metal cask and concrete cask storage technology has been verified by CRIEPI through several research programs on demonstrative testing for the interim storage of spent fuel. The results have been reflected in the safety requirements for dry casks issued by NISA/METI (Nuclear and Industrial Safety Agency, Ministry of Economy, Trade and Industry) of the Japanese government. On top of that, spent fuel integrity has been studied by the Japan Nuclear Energy Safety Organization (JNES). This paper reviews these research programs. Future issues include the long-term integrity of cask components and high burn-up spent fuel.