• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.49-55
• /
• 2013

To characterize quantitatively the transport of $^{99}Tc$ and the global fallout ($^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$) for soils in Korea, the transport parameters of a convective-dispersion model, apparent migration velocity, and apparent dispersion coefficient were estimated from the vertical depth profiles of the radionuclides in soils. The vertical profiles of $^{99}Tc$ were measured from a pot experiment for paddy soil that had been sampled from a rice-field around the Gyeongju radioactive waste repository in Korea, and the vertical depth distributions of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were measured from the soil samples that were taken from local areas in Korea. The front edge of the $^{99}Tc$ profiles reached a depth of about 12 cm in 138 days, indicating a faster movement than the fallout radionuclides. A weak adsorption of $^{99}Tc$ on the soil particles by the formation of Tc(VII) and a high water infiltration velocity seemed to have controlled the migration of $^{99}Tc$. The apparent migration velocity and dispersion coefficient of $^{99}Tc$ for the disturbed paddy soil were 2.88 cm/y and 6.3 $cm^2/y$, respectively. The majority of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were found in the top 20 cm of the soils even after a transport of about 30 years. The transport parameters for the global fallout radionuclides were 0.01-0.1cm/y ($^{137}Cs$), 0.09-0.13cm/y ($^{90}Sr$), and 0.09-0.18cm/y ($^{239+240}Pu$) for the apparent migration velocity: 0.21-1.09 $cm^2/y$ ($^{137}Cs$), 0.12-0.7$cm^2/y$ ($^{90}Sr$), and 0.09-0.36$cm^2/y$ ($^{239+240}Pu$) for the apparent dispersion coefficient.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.888-892
• /
• 1992

The chemically induced grain-boundary migration has been studied in MgAl2O4 spinel under ZnO atmosphere. MgAl2O4 compacts been prepared by sintering powder mixture of Al2O3 and MgO at 1$600^{\circ}C$ for 60 h in air. The sintered MgAl2O4 has been heat-treated at 150$0^{\circ}C$ in a ZnO atmosphere. During the heat-treatment grain boundaries have become curved or faceted, and the total area of grain boundaries have increased. In the migrated region, the ZnO content is higher by 6 wt% than that in other regions, indicating that the migration was induced by addition of ZnO. In some shrinking grains, the faceted planes of different grain boundaries for the same grain are parallel to each other. This result provide an experimental support for the coherency strain energy in diffusion layer of the shrinking grain as being the major driving force. Calculated coherency strain energy of MgAl2O4 shows the maximum at {111} planes and the minimum at {100} planes. Although the minimum surface energy is at {111} planes, the faceted moving boundaries are expected to be {100} planes because of lowest driving force for the grain-boundary migration.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권1호
• /
• pp.1-13
• /
• 2018

A series of experiments using transparent micromodels with an artificial pore network etched on glass plates was performed to investigate the effects of flow rate on the migration and distribution of resident wetting porewater (deionized water) and injecting non-wetting fluid (n-hexane). Multicolored images transformed from real RGB images were used to distinguish n-hexane from porewater and pore structure. Hexane flooding followed by immiscible displacement with porewater, migration through capillary fingering, preferential flow and bypassing were observed during injection experiments. The areal displacement efficiency increases as the injection of n-hexane continues until the equilibrium reaches. Experimental results showed that the areal displacement efficiency at equilibrium increases as the flow rate increases. Close observation reveals that preferential flowpaths through larger pore bodies and throats and clusters of entrapped porewater were frequently created at lower flow rate. At higher flow rate, randomly oriented forward and lateral flowpaths of n-hexane displaces more porewater at an efficiency close to stable displacement. It may resulted from that the pore pressure of n-hexane, at higher flow rate, increases fast enough to overcome capillary pressure acting on smaller pore throats as well larger ones. Experimental results in this study may provide fundamental information on migration and distribution of immiscible fluids in subsurface porous media.

• 지구물리와물리탐사
• /
• 제14권3호
• /
• pp.191-202
• /
• 2011

역시간 구조보정은 양방향 파동방정식을 이용하여 지하 구조를 영상화하는 정확성이 높은 구조보정 기법으로, 최근까지 주로 지하 매질을 등방성 매질로 가정하고 실시되어 왔다. 그러나 실제 지하매질은 이방성을 띠는 경우가 많으므로 역시간 구조보정 시 이를 고려한다면 영상의 정확도가 향상될 것으로 기대된다. 이에 본 연구에서는 대표적인 이방성매질인 VTI 및 TTI 매질에서의 역시간 구조보정 기술을 개발하였다. 이를 위하여 탄성 파동방정식을 음향 파동방정식으로 근사시킨 유사음향 파동방정식을 고차근사 유한차분법에 기반하여 모델링하였다. 역시간 구조보정 알고리듬으로는 상호상관을 이용한 영상화 기법과 가상 송신원을 이용한 영상화 기법을 모두 사용하였다. 완성된 알고리듬을 벤치마킹 모델인 Hess VTI 및 BP TTI 모델에 적용해본 결과, 본 연구에서 개발한 역시간 구조보정 알고리듬을 통하여 매질의 이방성을 고려해주었을 때 결과단면의 정확도가 크게 향상되는 것을 확인할 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.113-117
• /
• 2007

Sub-salt imaging is an unsolved hot issue in subsurface imaging area. We tested several important properties in imaging sub-salt structures to provide a clue to this problem. Reverse time migration using velocity models obtained by waveform inversion produced better results than that of stacking velocity analysis. Sub-salt imaging results were highly dependent on the size and shape of a salt structure. The results were not clear when the velocity of a salt structure is significantly higher than that of adjacent layers.

• Nuclear Engineering and Technology
• /
• 제21권4호
• /
• pp.267-276
• /
• 1989

중저준위 방사성 폐기물 처분 안전성 평가에 이용될 수 있는 유한 차분법에 의한 수치모델을 개발하였다. 이 모델은 처분장이 암반내에 위치한 경우에 대하여 처분장 주위 지하 암반 매질에서의 핵종의 이동을 기술하는 것으로 암반내의 단일한 균열으로의 지하수에 의한 이동과 균열에 수직한 방향으로의 확산을 고려하여 일차원적으로 해석하였다. 수치모델은 해석해와 병행하여 처분장 안전성 평가에 있어서 유용하게 이용될 수 있는 것으로 보다 실제적인 경계조건을 사용할 수 있게 하고, 불균질한 암반매질에 대해 다중매질 모델링을 제공한다. 수치모델의 검증을 위하여 균열에서의 Sr-90 농도 Profile을 구하여 해석해와 비교하였고, 몇몇 경계 조건에 따른 영향을 비교하고 암반매질을 파라미터 값이 단계적으로 변하는 이중 매질에 대하여 확장하였다.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.977-982
• /
• 2011

Migration and interaction of multi-protons in a zinc-doped barium zirconate (Zn-doped $BaZrO_3$) super cell were investigated using a density functional theory. O ions in the super cell form interconnected octahedrons with Zr or Zn ions positioned in their centers and Ba ions positioned among the eight octahedrons. When one proton was added to the super cell, the energy barrier of 0.80 eV for proton transfer from the first to second nearest O ion sites from the Zn ion reached its highest value. When two protons were added to the super cell, the two protons preferred the first nearest O ions from the Zn ion. The two protons were accommodated by pushing the neighboring Zn ion further away from the center of the octahedron. Energy barriers for proton transfer from the Zn-octahedron to the neighboring Zr-octahedron were spread in the range of 0.36 ~ 1.02 eV.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2879-2888
• /
• 2023

In fusion environments, large scales of helium (He) atoms are produced by a radical transformation along with structural damage in structural materials, resulting in material swelling and degradation of physical properties. To understand its irradiation effects, this paper investigates the stability, electronic structure, energetics, charge density distribution, PDOS and TDOS, and diffusion processes of He impurities in 6HSiC materials. The formation energy indicates that a stable, favorable position for interstitial He is the HR site with the lowest energy of 2.40 eV. In terms of vacancy, the He atom initially prefers to substitute at pre-existing Si vacancy than C vacancy due to lower substitution energy. The minimum energy paths (MEPs) with migration energy barriers are also calculated for He impurity by interstitial and vacancy-mediated diffusion. Based on its calculated energy barriers, the most possible diffusion path includes the exchange of interstitial and vacancy sites with effective migration energies ranging from 0.101 eV to 1.0 eV. Our calculation provides a better understanding of the stabilization and diffusion behaviors of He impurities in 6H-SiC materials.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.439-454
• /
• 2007

In this paper a damage imaging technique using pre-stack migration is developed using Lamb (guided) wave propagation in composite structures for imaging multi damages by both numerical simulations and experimental studies. In particular, the paper focuses on the experimental study using a finite number of sensors for future practical applications. A composite laminate with a surface-mounted linear piezoelectric ceramic (PZT) disk array is illustrated as an example. Two types of damages, one straight-crack damage and two simulated circular-shaped delamination damage, have been studied. First, Mindlin plate theory is used to model Lamb waves propagating in laminates. The group velocities of flexural waves in the composite laminate are also derived from dispersion relations and validated by experiments. Then the pre-stack migration technique is performed by using a two-dimensional explicit finite difference algorithm to back-propagate the scattered energy to the damages and damages are imaged together with the excitation-time imaging conditions. Stacking these images together deduces the resulting image of damages. Both simulations and experimental results show that the pre-stack migration method is a promising method for damage identification in composite structures.

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.113-122
• /
• 2007

본 연구에서는 타당한 지하조건을 모사하기 위한 실험장치를 글로버박스(Glove-box) 내에 설치하고 천연지하수 및 자연균열을 가진 화강암 시추코어를 이용하여 핵종이동 실험을 수행하였다. 암반코어의 균열을 통한 지하수 유동을 해석하기 위하여 비수착성 음이온 핵종인 Br로 지하수 유동실험을 수행하였다. 암반 균열을 통한 우라늄 이동 실험결과에서 유출된 우라늄의 파과곡선이 비수착성 핵종인 Br와 유사한 거동을 보여주었는데, 이는 주어진 지하수 조건에서 우라늄이 주로 탄산염과 결합된 음이온 복합체로 이동하기 때문인 것으로 추정된다. 아울러 균열충전광물에 대한 우라늄의 회분식 수착실험을 수행한 결과, 균열충전광물에 대한 우라늄의 분배계수 $K_d$는 약 2.7 mL/g로 낮게 나타났다. 이러한 우라늄 수착실험 결과는 빠른 유출을 보인 우라늄 이동실험 결과와 일치한다. 균열암반을 통한 우라늄 이동의 지 연 특성을 보다 자세히 분석하기 위하여 회분식 수착실험으로 부터 구한 $K_d$값을 이용해 지연인자 $R_d$값 $({\sim}16.2)$를 구하고 이동실험 결과로부터 구한 $R_d$값 $({\sim}14.3)$과 비교한 결과, 서로 매우 유사한 지연인자 값을 가진다는 것을 알 수 있었다. 이는 화강암 코어의 균열을 통한 우라늄의 이동 지연이 주로 균열충전광물에 의해 이루어지고 있음을 의미하는 것이라고 하겠다.