• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.185-194
• /
• 2020

Designing of a hierarchical clustering algorithm is one of the numerous approaches to minimize the energy consumption of the Wireless Sensor Networks (WSNs). In this paper, a homogeneous and randomly deployed sensor nodes is considered. These sensors are energy constrained elements. The nominal selection of the Cluster Head (CH) which falls under the clustering part of the network protocol is studied and compared to Low Energy Adaptive Clustering Hierarchy (LEACH) protocol. CHs in this proposed process is the function of total remaining energy of each node as well as total average energy of the whole arrangement. The algorithm considers initial energy, optimum value of cluster heads to elect the next group of cluster heads for the network as well as residual energy. Total remaining energy of each node is compared to total average energy of the system and if the result is positive, these nodes are eligible to become CH in the very next round. Analysis and numerical simulations quantify the efficiency and Average Energy Ratio (AER) of the proposed system.

• 태양에너지
• /
• 제1권1호
• /
• pp.1-11
• /
• 1981

The electric generation system by solar energy was built which is composed of $10m^2$ reflector, parabolic mirror and the absorbers. The absorber(I) is a single iron pipe and the absorber (II) contains seven small iron pipes. The ratio of the area of the reflectors to that of the absorber is around 99.4-440. The absorber(II) is more efficient in power than (II) by 5.6 percent. The steam power efficiency of the absorber (II) is 25 percent in this experiments and 20 percent efficiency would be expected for 80.000 Kilowatts.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1629-1634
• /
• 2008

A trial was conducted to determine the effect of low crude protein (CP) diets with constant metabolizable energy to crude protein (ME:CP) ratio on growth, body composition and nutrient utilization of broiler chicks from 1 to 26 days of age. Four dietary treatments having four levels of CP and ME as 23, 22, 21 and 20% and 3,036, 2,904, 2,772 and 2,640 kcal/kg, respectively, were formulated and a ME:CP ratio of 132 was maintained in all the diets. Digestible lysine was maintained at 1.10 of the diet. A total of 1,760 day-old Hubbard broiler chicks were randomly divided into 16 experimental units and each diet was offered to four experimental units at random. Feed intake was increased (p<0.05) while weight gain and feed conversion ratio were adversely affected (p<0.05) when the diets with low CP and ME were fed to broilers. Total protein intake and total ME intake were linearly decreased (p<0.05) and protein efficiency ratio and energy efficiency ratio were lower (p<0.05) than in the chicks fed dietary regimen with 22% CP and 2,904 kcal/kg ME. The whole body analysis of the birds revealed that chicks fed the lowest dietary regimens retained less (p<0.05) nitrogen and more ether extract than chicks fed the control diet, however, body dry matter, total body ash and fat free body protein were not affected. Similarly, protein and energy utilization were also unaffected by the dietary treatments. In summary, chicks fed low CP diets with constant ME:CP ratio grew slower, used feed less efficiently and retained less protein and more body fat than chicks fed the control diet.

• 한국식품과학회지
• /
• 제24권5호
• /
• pp.428-439
• /
• 1992

고추건조에 대한 에너지사용의 효율성을 표현할 수 있는 건조효율 지표를 유도하고 정의하였으며 건조효율에 미치는 공정변수의 영향을 분석하고 carotenoids 보존의 제한조건하에서 건조효율을 최대화시키는 최적건조조건을 찾았다. 전체 사용에너지에 대한 증발에너지의 비로 단순화시켜서 열풍의 건구 및 습구온도의 함수로 표현된 건조효율이 건조공정중 실제의 에너지 사용의 효율성을 표현할 수 있는 것으로 확인되었고, 이를 이용하여 주어진 조건에서의 최적화가 가능하였다. 최적화 결과 1단계 건조에 비해서 2단계 건조가 같은 품질제한 조건하에서 건조효율을 증가시킬 수 있었다. 한편 배기공기 온도를 포함하는 간단한 변환변수와 건조되는 고추의 수분함량 사이의 관계에 의하여 건조시간 종료를 제어할 수 있는 가능성도 검토되었다. 전체적으로 본 연구에서 고추 건조시 좋은 품질을 유지하면서 건조효율을 향상시키고 에너지소비를 절감할 수 있는 건조기 운전의 방향을 제시하였다.

• Current Photovoltaic Research
• /
• 제11권3호
• /
• pp.67-74
• /
• 2023

The earth-abundant element-based Cu₂ZnSn(S,Se)₄ (CZTSSe) thin film solar cells (TFSCs) have attracted greater attention in the photovoltaic (PV) community due to their rapid development in device power conversion efficiency (PCE) >13%. In the present work, we demonstrated the fine-tuning of the bandgap in the CZTSSe TFSCs by altering the sulfur (S) to the selenium (Se) chalcogenide ratio. To achieve this, the CZTSSe absorber layers are fabricated with different S/(S+Se) ratios from 0.02 to 0.08 of their weight percentage. Further compositional, morphological, and optoelectronic properties are studied using various characterization techniques. It is observed that the change in the S/(S+Se) ratios has minimal impact on the overall Cu/(Zn+Sn) composition ratio. In contrast, the S and Se content within the CZTSSe absorber layer gets altered with a change in the S/(S+Se) ratio. It also influences the overall absorber quality and gets worse at higher S/(S+Se). Furthermore, the device performance evaluated for similar CZTSSe TFSCs showed a linear increase and decrease in the open circuit voltage (V_oc) and short circuit current density (J_sc) of the device with an increasing S/(S+Se) ratio. The external quantum efficiency (EQE) measured also exhibited a linear blue shift in absorption edge, increasing the bandgap from 1.056 eV to 1.228 eV, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.71-78
• /
• 2002

The N-value from the standard penetration test(SPT) is affected by the magnitude of the rod penetration energy transmitted from the falling hammer as well as the geotechnical characteristics of the ground. Understanding of the striking energy efficiency in the SPT equipment is getting important for that reason. The energy efficiencies of the various type of equipment were investigated through field tests using the instrumented rod and wave-signal acquisition systems including the pile driving analyzer(PDA). The rod energy ratio, ERr was defined as the ratio of the energy delivered to the drilling rod to the potential free-fall energy of the hammer. It appears that the type of the hammer and lift/drop system had a strong influence on the energy transfer mechanism and ERr also varies according to the energy instrumentation system and the analysis methods.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.12-25
• /
• 2007

Numerical simulation of the natural gas steam reforming process for on-site hydrogen production in a $H_2$ fueling station was conducted on the basis of process material and heat balances. The effects of reforming parameters on the process efficiency of hydrogen production were investigated, and set-point values of each of the parameters to minimize the sizes of unit process equipments and to secure a stable operability of the reforming process were suggested. S/C ratio of the reforming reactants was found to be a crucial parameter in the reforming process mostly governing both the hydrogen production efficiency and the stable operability of the process. The operation of the process was regarded to be stable if the feed water(WR) as a reforming reactant could evaporate completely to dry steam through HRSG. The optimum S/C ratio was 3.0 where the process efficiency of hydrogen production was maximized and the stable operability of the process was secured. The optimum feed rates of natural gas(NGR) and WR as reforming reactants and natural gas(NGB) as a burner fuel were also determined for the hydrogen production rate of $27\;Nm^3/h$.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.91-97
• /
• 2013

Recently a novel cycle named organic flash cycle (OFC) has been proposed which has improved potential for power generation from low-temperature heat sources. This study carries out thermodynamic performance analysis of OFC using various working fluids for recovery of low-grade heat sources in the form of sensible energy. Special attention is focused on the optimum flash temperature at which the exergy efficiency has the maximum value. Under the optimal conditions with respect to the flash temperature, the thermodynamic performances of important system variables including mass flow ratio, separation ratio, heat addition, specific volume flow rate at turbine exit, and exergy efficiency are thoroughly investigated. Results show that the exergy efficiency has a peak value with respect to the flash temperature and the optimum working fluid which shows the best exergy efficiency varies with the operating conditions.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.573-584
• /
• 2021

Hydrogen is evaluated as one of the new energy sources that can overcome the limitations and pollution problems of conventional fossil fuels. Although hydrogen is CO₂-free, attention is required in NO_x emission and flame stability in order to use hydrogen in existing gas fuel system. However, use of electric grids is an unrealistic strategy for decarbonization for residential and commercial heating. Instead, use of H₂ that utilizes city gas grid is suggested as a reasonable alternative in terms of compatibility with existing systems, economic feasibility, and accessibility. In this study, the thermal efficiency and NO_x performance of the boiler according to the H₂ mixture ratio and vapor humidified ratio are reviewed for a humidified NG-H₂ boiler that vapor humidity to combustion air. Mixed fuel with H₂ (20%) is almost similar to NG in terms of efficiency, flame temperature, and pollution performance. Thus, it is expected to be directly compatible with the existing NG system. If the exhaust temperature of the H₂ boiler is lowered to around 60℃ at a humidified ratio of 15-20%, the NO_x emission concentration can be suppressed to about 5-10 ppm. The level of efficiency reaches 87% of the rated load efficiency, which is equivalent to the highest grade achievable.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.34-40
• /
• 2012

In this paper, voltage clamped tapped-inductor boost converter with high voltage conversion ratio is proposed. The conventional tapped-inductor boost converter has a serious drawback such as high voltage stresses across all power semiconductors due to the high resonant voltage caused by the leakage inductor of tapped inductor. Therefore, the dissipative snubber is essential for absorbing this resonant voltage, which could degrade the overall power conversion efficiency. To overcome these drawbacks, the proposed converter employs a voltage clamping capacitor instead of the dissipative snubber. Therefore, the voltage stresses of all power semiconductors are not only clamped as the output voltage but the power conversion efficiency can also be considerably improved. Moreover, since the energy stored in the clamp capacitor is transferred to the output side together with the input energy, the proposed converter can achieve the higher voltage conversion ratio than the conventional tapped-inductor boost converter. Therefore, the proposed converter is expected to be well suited to various applications demanding the high efficiency and high voltage conversion ratio. To confirm the validity of the proposed circuit, the theoretical analysis and experimental results of the proposed converter are presented.