• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1645-1654
• /
• 2003

When vortex shedding is locked-on to a single frequency oscillatory flow, the variations of vortex dynamics are investigated using a time-resolved PIV system. Wake regions of recirculation and vortex formation, dynamic behavior of the shed vortices and the Reynolds stress fields are measured in the wake-transition regime at the Reynolds number 360. In the lock-on state, reduction of the wake region occurs and flow energy distributed downstream moves upstream being concentrated near the cylinder base. To observe the dynamic behavior of the shed vortices, the trajectory of the vortex center extended to the inside of the wake bubble is considered, which describes well the formation and evolution processes. The Reynolds stresses and their contributions to overall force balance on the wake bubble manifest the increase of the drag force by the lock-on.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.141-144
• /
• 2006

The tidal pi lot plant is being built in the Uldolmok waterway using Its strong tidal current with maximum current of about 12knots, which is revealed from the first direct observation using ADCP, on February, 2002. a serious of field observations (for example, ADCP observation was tarried out both at February 2002 and September, 2003), along with numerical modeling, have been carried out over the last several years, in order to understand the tidal dynamics and to examine the related variables according to the tidal current power plant (TCPP) operation.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.39-46
• /
• 2000

The imploded open $\pi$-rays comprise of the space and their diameters are distributed from nearly zero to infinite. The change of the potential energy in the open $\pi$-ray produces an attraction force between them and it is sensible to the geometric shape factor and its frequency. The equivalent principle of general relativity means that in the wave equation its velocity of the force wave is infinite. The change of the state in a open $\pi$-ray(or any force wave) can be transferred to any sensible open $\pi$-ray via space at a finite velocity. Many properties of the light wave can be deduce from the motions of open $\pi$-rays.The nonsteady and steady Schr dinger equations include the dynamics of open $\pi$-rays and closed $\pi$-rays.$\prod$-ray is a tool of entity for constructing physics and metaphysics at the same time.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.91-95
• /
• 2009

나노튜브를 기반으로 한 용량성 나노 가속도계에 대한 특성을 고전적인 분자동역학 시뮬레이션을 이용하여 연구하였다 외부에서 공급된 힘을 이용하여 나노튜브의 위치를 제어할 수 있었고, 해당하는 위치에 의한 커패시턴스의 변화를 통하여 피드백 센싱을 할 수 있었다. 에너지 소모 측면을 고려하면, 나노 가속도계의 진동 특성은 초기 변위와는 무관하였으며, 이러한 측정 시스템은 진동하는 커패시턴스를 추적하여 가속도를 결정하고, 이것은 또한 공급된 힘과 용량성 힘, 반데르발스 힘, 결합력, 반발력과 같은 힘들이 균형을 이루는 위치를 결정할 수 있다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.112-112
• /
• 2006

Detailed surface characteristics of polymer films have been investigated by atomistic molecular dynamics simulations and NEXAFS spectroscopy experiments. The geometric confinement of the surfaces and the necessity to minimize the surface energy lead to the significant molecular organization and orientation in polymer surfaces, with their properties strongly depending upon the atomistic monomer structures. As compared with polymers, oligomeric electronic materials are much more readily aligned by employing various surface anchoring forces, rendering them highly attractive as polarized-light emitting materials and active semiconducting materials in thin film transistors.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.11-18
• /
• 2004

In this paper, an efficient model reduction scheme is presented for large scale dynamic systems. The method is founded on a modal analysis in which optimal eigenvalue is extracted from time samples of the given system response. The techniques we discuss are based on classical theory such as the Karhunen-Loeve expansion. Only recently has it been applied to structural dynamics problems. It consists in obtaining a set of orthogonal eigenfunctions where the dynamics is to be projected. Practically, one constructs a spatial autocorrelation tensor and then performs its spectral decomposition. The resulting eigenfunctions will provide the required proper orthogonal modes(POMs) or empirical eigenmodes and the correspondent empirical eigenvalues (or proper orthogonal values, POVs) represent the mean energy contained in that projection. The purpose of this paper is to compare the reduced order model using Karhunen-Loeve expansion with the full model analysis. A cantilever beam and a simply supported plate subjected to sinusoidal force demonstrated the validity and efficiency of the reduced order technique by K-L method.

• 한국주거학회논문집
• /
• 제11권2호
• /
• pp.13-23
• /
• 2000

Lived space, i.e. space as we experience it in our mundane life, does not exist independently of material objects: it is defined, delimited and made sensible by them. Concrete spaces so manifest are not sterile and neutral homogeneous voids. Not only do they interact with material objects but also influence our feelings and behaviour, constituting emotionally charged fields. This field dynamics of space is readily observed in the phenomenon of place as well as in the etymology and usage of the word 'place'. Each space is pervaded by a particular mood or atmosphere in accordance with its size and shape as well as with the perceptual properties of its constituent objects. Moreover, within each space the atmosphere also changes depending on the location. Space then can be thought of as a nonhomogeneous field of emotional energy. The fact that one is attracted to some places and repulsed by others may be described as one's being subject to invisible forces of pulls and pushes, attractions and repulsions. Out spatial environment is therefore a field of forces of varying directions and magnitudes.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.99-108
• /
• 2013

The standard drag force and virtual mass force, which exert to the primary flow direction, are generally considered in two-phase analysis computational codes. In this paper, the lift force, wall lubrication force, and turbulent dispersion force including turbulence models, which are essential for a computational multi-fluid dynamics model and play an important role in motion perpendicular to the primary flow direction, were introduced and verified with conceptual problems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.554-562
• /
• 2015

This paper describes an analysis of an architecture and control system of a firefighting cannon manipulator (FCM) composed of two joint axes and one water-shooting actuator. Because the orienting FCM motion is disturbed by the reaction force from water shooting, the water shooting force has been modeled for robust control. The dynamics model of the manipulator has been set up including the external force of water-shooting reaction on the manipulator. A PD Controller and Sliding Mode Controller have been designed and their performance been tested through simulation to track a desired trajectory under the disturbance of a water-shooting reaction. The simulation shows that the performance of the Sliding Mode Controller is better than that of the PD controller.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.473-478
• /
• 2012

In this paper, the air bubble formation mechanism in the rectangular and triangular line-and-space pattern during dispensing UV Nanoimprint Lithography (UV-NIL) at an atmospheric condition is studied. To investigate the air bubble formation, an analytic model based on geometric approach and a numerical model based on CFD(computational fluid dynamics) were used in the analysis. It was found in the numerical analysis that every time the flow front passed through a corner of the pattern, it proceeded with a newly formed shape, occurring due to interface reconfiguration, since the flow fronts were formed such that they minimized the surface energy. Moreover, the conditions for the air bubble formation were investigated by applying the analytic analysis based on geometric approach and the numerical analysis. Good overall agreement was found between the analytic and numerical analysis.