• Advances in aircraft and spacecraft science
• /
• v.8 no.1
• /
• pp.69-85
• /
• 2021

A modified fuzzy mechanical control of large-scale multiple time delayed dynamic systems in states is considered in this paper. To do this, at the first level, a two-step strategy is proposed to divide a large system into several interconnected subsystems. As a modified fuzzy control command, the next was received as feedback theory based on the energetic function and the LMI optimal stability criteria which allow researchers to solve this problem and have the whole system in asymptotically stability. Modeling the Fisher equation and the temperature gauge for high-speed aircraft and spacecraft shows that the calculation method is efficient.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2031-2036
• /
• 2022

Energetic particle strikes the device and induces data corruption in the configuration memory (CRAM), causing errors and even malfunctions in a system on chip (SoC). Software-based fault injection is a convenient way to assess device performance. In this paper, dynamic partial reconfiguration (DPR) is adopted to make fault injection on a Xilinx 16 nm FinFET Ultrascale+ MPSoC. And the reconfiguration module implements the Sobel and Gaussian image filtering, respectively. Fault injections are executed on the static and reconfiguration modules' bitstreams, respectively. Another contribution is that the failure modes and effects analysis (FMEA) method is applied to evaluate the system reliability, according to the obtained injection results. This paper proposes a software-based solution to estimate programmable device vulnerability.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.145-153
• /
• 2015

$Cr_2O_3/AP$ (ammonium perchlorate) energetic composites were prepared by a method of solvent/anti-solvent. XRD analysis revealed that the crystalline structure of AP in $Cr_2O_3/AP$ composites is the same as that of pure AP. SEM photomicrograph shows that an average size of cuboid $Cr_2O_3/AP$ composites is approximately $2.5{\mu}m$. TGA analysis shows that the addition of submicron $Cr_2O_3$ particles into AP lowers the HTD (high-temperature decomposition) compared to that of neat AP and the activation energy of the $Cr_2O_3/AP$ composites was calculated by the isoconversional Starlink method. Considering changes in the activation energy, the decomposition reaction mechanism of AP was suggested as follows; the decomposition with the formation of nucleation sites renders formation of porous structure in the composites up to conversion of about 0.25 and after further conversion of over 0.3, it seems that decomposition reaction vigorously takes place rather than sublimation of AP.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.87-90
• /
• 2006

In case of preparation of ITO thin film for using top electrode of Top-emitting Organic Light Emitting Diodes(TOLEDs), the ITO thin film should be prepared at room temperature and low oxygen gas flow condition in order to reduced the damage of organic layer due to the bombardment of highly energetic particles such as negative oxygen ions which accrued from the plasma. In this study, the ITO thin film with high optical transmittance and low resistivity prepared as a function of oxygen gas (0 ${\~}$ 0.8 sccm) and Ar gas was fixed at 20 sccm by the Facing Targets Sputtering (FTS) method. The electrical and optical properties of ITO thin films were measured by Hall effect measurement, UV/VIS spectrometer, respectively In the results, we obtained the ITO thin film with lowest resistivity($3{\times}10^{-4} {\Omega}{\cdot} cm$) at oxygen gas flow 0.2 sccm and optical transmittance over $80\%$ at oxygen gas flow over 0.2 sccm.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.673-680
• /
• 2011

The compound 3-(2-Mercaptopyridine)phthalonitrile has been synthesized and characterized by IR, UV-vis, and X-ray single-crystal determination. The molecular geometry from X-ray determination of the title compound in the ground state has been compared using the Hartree-Fock (HF) and density functional theory (DFT) with the 6-31G(d) basis set. The calculated results show that the DFT and HF can well reproduce the structure of the title compound. The energetic behavior of the title compound in solvent media was examined using the B3LYP method with the 6-31G(d) basis set by applying the Onsager and polarizable continuum model. Using the TD-DFT and TD-HF methods, electronic absorption spectra of the title compound have been predicted and good agreement with the TD-DFT method and the experimental determination was found. The predicted nonlinear optical properties of the title compound are much greater than those of urea. Besides, molecular electrostatic potential of the title compound were investigated by theoretical calculations. The thermodynamic properties of the compound at different temperatures have been calculated and corresponding relations between the properties and temperature have also been obtained.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.45.2-45.2
• /
• 2010

We analyzed onset times of the largest six solar proton events during 1997-2006 of solar cycle 23, as observed at 1AU by two satellites of GOES/SEM (Geostationary Operational Environmental Satellites/the Space Environment Monitor) and SOHO/ERNE (Solar and Heliospheric Observatory/the Energetic and Relativistic Nuclei and Electron). We adopted the time shifted method suggested by Leon Kocharov and determined the path length by Sam Krucker's fitting method. We found some problems of those methods and tried to improve those. In this presentation, we will give details of the energy spectra of the 6 SPE events from the ERNE/HED, and onset time comparison among the SPE, flare, type II burst, and CME.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.55-60
• /
• 2018

The thermal property is one of the most important characteristics in the field of energetic materials. Because energy materials release decomposition heat, differential scanning calorimetry (DSC) is frequently used for thermal analysis. However, thermodynamic events, such as melting can interfere with DSC kinetic analysis. In this study, we use isothermal mode for DSC measurement to avoid thermodynamic issues. We also merge accelerating rate calorimetry(ARC) data with DSC data to obtain a robust prediction results for small scale samples and for large scale samples as well. For the thermal property prediction, advanced kinetics and technology solutions(AKTS) programs are used.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.2
• /
• pp.35-43
• /
• 2019

The effect of pan frying method was evaluated for proximate composition of selected fish species Pampus argenteus, Lethrinus nebulosus and Acanthopagarus arabicus which were determined by standard procedures. Proximate compositions found in the frying fillets were different to the raw fish samples. The moisture content seems to decrease in all fried samples. The reason of moisture loss at the time of frying produced is excessive protein amount in fried fish as compare to raw fish. Protein content seemed to increase in Pampus argentus > Lethrinus nebulosus and >Acanthopagrus arabicus in their particular fried form. The outcomes shown that protein content was in the ranges of 14.83-25.07 g/100g in fried samples, while the fat content was between 3.76-9.77 g/100 g. The energy content was the highest in the fried fish Lethrinus nebulosus (236 kcal/100 g), Pampus argentus (161 kcal/100 g) and Acanthopagrus arabicus (135 kcal/100 g). The information achieved in this study would be very important to fish consumers, processors and nutritionists to academically increase their awareness regarding the nutrients contents in selected fish species.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.172-178
• /
• 2017

Thermal property is one of the important characteristic in the field of energetic materials. As the energy material is released during decomposition, DSC(Differential Scanning Calorimetry) is frequently used for the thermal analysis. In case of the dynamic DSC measurements, thermal dynamic change like melting is prevented from the thermal property measurements. And due to the predicting kg scale, the conditions of the heat exchange with the environment significantly is changed. In this study, As the method to resolve the problem, we predict the thermal aging property using the AKTS thermokinetic program from DSC measurements which performed isothermal method. Predicting the thermal aging properties from ARC(Accelerating Rate Calorimetry) measurement, we compare two results.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.6
• /
• pp.1261-1266
• /
• 2009

The wrinkle is a typical sign showing aging. These days lots of people want to have a young and healthy appearance and many medical doctors are studying about wrinkle cure. In fact a young face without wrinkle looks more healthy and energetic. Therefore the wrinkle cure is important at the point of medical view. This research is an investigation of several studies about wrinkle cure using acupuncture needle. We have to consider the problem of the whole body which is related 12 meridians and meridian muscles as well as topical skin and tissues. There are three parts affecting wrinkle formation and cure. The first is a meridian and meridian muscle, the second is a local muscle and fascia on the head and neck, the third is a local skin structure. There are three kinds of method to cure the wrinkle locally. The first one is the perpendicular treatment of acupuncture, called the microneedle therapy, the process of this method is that lots of microneedles stab in the skin to dermis. The second one is the transverse treatment of acupuncture. The process of this method is that an acupuncture needle inserts just under the wrinkle skin. The third one is the incision treatment of acupuncture, called subcision, the process of this method is to cut the fibrous band which connect from the facial muscle to SMS(superficial musculoaponeurotic system) using cuttable needle. The hematoma after treatment let a collagen increase.