• Steel and Composite Structures
• /
• v.11 no.4
• /
• pp.307-324
• /
• 2011

With the increasing use of concrete-filled steel tubes (CFST) as structural members, there is a growing need to provide suitable measures for possible strengthening or repair of these kinds of structural elements. Fibre reinforced polymer (FRP) jacketing is a recent method and is particularly attractive in which it does not significantly increase the section size, and is relatively easy to install. Thus, it can be used to enhance strength and/or ductility of CFST members. Very little information is available on the performance of FRP-strengthened CFST members under fire conditions. This paper is an attempt to study the fire performance of CFST columns strengthened by FRP. The results of fire endurance tests on FRP-strengthened circular CFST columns are presented. Failure modes of the specimens after exposure to fire, temperatures in the cross section, axial deformation and fire resistance of the composite columns are analysed. It is demonstrated that the required fire endurance can be achieved if the strengthened composite columns are appropriately designed.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.318-331
• /
• 2021

This study was conducted on the assumption that bone age would be more effective when it comes to physique and physical fitness assessment for adolescents, and the purpose of this study was to identify the differences in physique and physical fitness for students in their adolescence through bone age and chronological age in order to contribute to the well-balanced physique and physical fitness development in adolescents and the health improvement in students. Total 874 adolescents(483 males, 391 females) aged 11~16 were selected as subjects out of the total population of 1100 adolescents aged 6~16 based on the PAPS(Physical Activity Promotion System) and age standards of the TW3 method; and skeletal maturation, which symbolize the indicators of biological maturation, were evaluated by using the TW3(Tanner-Whitehouse 3) method after hand-wrist radiographs, and birth date was used for chronological age. A stadiometer and InBody 270 (Biospace, Korea) were used to measure 2 components in physique. A total of 7 components in physical fitness, which included muscular strength, muscular endurance, flexibility, power, cardiovascular endurance, balance, agility, were measured as well. A independent samples t-test was conducted for data processing using SPSS 25.0, and the significance level was set at p< .05. The study results are as follows. First, bone age and chronological age used for physique comparison in males aged 11 and 12, height and weight showed significant difference; in males aged 13, weight showed signicant difference. Weight and height in females aged 11, and height in females aged 12 showed significant difference. Second, bone age and chronological age used for physical fitness comparison in males aged 11, muscular strength, power, flexibility, cardiovascular endurance showed significant difference; in males aged 12, muscular strength. power, cardiovascular endurance; in males aged 13, flexibility showed significant difference. Muscular strength, power, flexibility, muscular endurance, cardiovascular endurance in females aged 11, and flexibility in females aged 14 showed significant difference. As a result, this study concluded that in a period of rapid skeletal growth, evaluating physique and physical fitness based on bone age is more accurate than evaluating based on chronological age.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1627-1642
• /
• 2021

This study aims to evaluate physical fitness according to the bone age of youth, and ultimately provide basic data for balanced development of youth through physical fitness standard indicators according to the bone age. A total of 730 youth aged 11 to 13 years in bone age and 11 to 13 years in chronological age were selected as subjects; and after taking X-ray films to calculate the bone age, they were evaluated by using the TW3 method. A total of 2 components in physique, which were stature and weight, were measured using a stadiometer(Hanebio, Korea, 2021) and Inbody 270(Biospace, Korea, 2019). A total of 7 components in physical fitness were measured as well, which included muscular strength (Hand Grip Strength), balance (Bass Stick Test), agility (Plate Tapping), power (Standing Long Jump), flexibility (Sit&Reach), muscular endurance (Sit-Up), and cardiovascular endurance (Shuttle Run). Descriptive statistics and independent t-test were conducted for data processing using the SPSS PC/Program(Version 26.0), and it was considered significant at the level of p< .05. The results of this study may be summarized as follow. First, the result of comparing the bone age and the chronological age of 11 to 13 years old in physical fitness, males showed significant difference in muscular strength, power, muscular endurance, and cardiovasular endurance. In females, muscular strength, balance, agility, power, flexibility, muscular endurance, and cardiovascular endurance showed significant difference. Second, physical fitness standard indicators were presented for each gender and age (11-13 years old) of youth according to the bone age; and based on this, physical fitness standard indicators, which are basic data for physical fitness evaluation according to the bone age of youth, were presented.

• The Journal of Korean Physical Therapy
• /
• v.10 no.1
• /
• pp.67-74
• /
• 1998

To determine the effects of exercise program which is developed to advanced the physical fitness of the old aged, mountain climbing exercise for 12 weeks was performed to the agee 60's. Studied subjects consisted with 50 na: and 50 women, aged 60's, who resided in Taejon city and had not done regular exercise. Body fat, muscle strength, body flexibility and cardiovascular endurance of them were calculated and compared before and after mountain climbing exercise for 12 weeks from September 1, 1996. Following results were obtained therefrom; Body fat reduced $2.57\%$ in made, and $2.68\%$ in female, but muscle strength was improved 3.07kg in made and 2.43kg in female. Body flexibility, tested by bend forward, was improved 2.17cm in made, and 2.32cm in female. Cardiovascular endurance, tested by 1,200m running time, was reduced 18.2 seconds in made and 15.5seconds in female. For the conclusion, there showed advancement of physical fitness after the 12 weeks mountain climbing exercise.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.64-70
• /
• 2013

In this study, the effect of soxhlet extraction on dewaxing of the aged beeswax-treated paper was examined. To do this, soxhlet extraction of the aged beeswax-treated paper performed with different reflux conditions and then measured the dewaxing efficiency and change in the various properties such as tensile strength, folding endurance, color and brightness. Also, an artificial aging test was executed in order to investigate the effect of soxhlet extraction on the preservability of the dewaxed paper. As the result of FT-IR analysis, a peak area of CH and COOH group, which are main band of beeswax, was decreased or removed after soxhlet extraction. The decreasing rate of each peaks were increased depending on reflux time. After dewaxing, the physical property such as MIT type folding endurance and tensile strength was decreased. And $L^*$ value and brightness were increased while $a^*$ and $b^*$ value were decreased due to the remove of color compounds in beeswax. The more color deviation (${\Delta}E$) is expected with higher reflux times. As the result of artificial aging, preservability of two dewaxed papers except of DP_SE(C) sample was higher than that of untreated paper i.e. beeswax-treated paper.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.334-341
• /
• 2020

Through a investigation of the physical activity status of 1794 undergraduates who were non-sports majors from freshman to senior in Jiangxi Normal University, to analyze physical fitness status of college students with different physical activity levels. The results showed that in physical activity, high-intensity physical activity of male was higher than female, while medium-intensity and low-intensity (insufficient) physical activity of female was higher than male. College students' high-intensity physical activity group's physical test scores were better than the medium-intensity physical activity group, and the medium-intensity physical activity group was superior to the low physical activity group. In terms of physical fitness, among the test indicators of body shape and physiological function, the vital capacity and body mass index of male and female were ranked at a pass level. In the physical fitness test indicators, the performance of college students' endurance qualities was better while the overall performance of strength qualities was lower. The overall fitness of college students was ranked at a pass level, and the physical test scores of female were better than male.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.17 no.2
• /
• pp.33-39
• /
• 2011

Background: The purpose of this study was to verify the most effective spinal stabilization exercise program by comparing the activities of muscles contributing to spinal stabilization during 2 types of exercises using 3-D NEWTON and a Gym-ball. Methods: We divided sixteen healthy students to two groups in D city were recruited and each subjects performed two type of exercise. Exercise 1 was performed 3-D NEWTON spinal stabilization training during 4 weeks (n=8). Exercise 2 was performed special training program that use a Gym-ball during 4 weeks (n=8). Results: The group of 3-D NEWTON applying lumbar stabilization kinetic program was increased 18.8s after training. Conclusions: It was revealed the statically significant difference between 3-D NEWTON and Gym-ball lumbar stabilization exercise groups. Therefore it has been turned out that 3-D NEWTON and Gym-ball lumbar stabilization exercise has an effect on the abdominis and trunk muscle strengthening and balance.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.132-136
• /
• 2009

The importance and interests for saving of energy and cost in industry has been steadily grown up. Therefore, process optimization to reduce the processing step and energy is one of the most important things. The micro-alloyed steel of which post-heat-treatment is not necessary, has attractive points for high strength materials. However, for the application of non-heat-treated steel to structural parts, it is necessary to confirm the reliability of mechanical properties. In order to estimate mechanical properties. The microstructure, hardness, tensile strength, compressive strength and tensile fatigue strength of micro-alloyed steel having 900MPa tensile strength has been investigated.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.433-438
• /
• 2005

Seven commercial lining fabrics normally used in a market were selected: plain-weave fabrics with polyester, nylon, rayon and acetate fiber, and polyester textured yarn, in addition, polyester fabrics with plain, twill and satin weave. Then seam strength, seam efficiency, resistance to slippage of yarns and type of seam destruction were examined related to endurance by textiles in sewing capability of the lining fabrics. In results, as tensile strength was greater, seam strength got greater, which shows tensile strength and seam strength have close relationship. Tensile and seam strength of acetate fabric were the least, but seam efficiency was the greatest. It presents that strong tensile and seam strengths do not show high seam efficiency at the same time. Various types of seam destruction have been shown. When tensile strength of the sewing thread was greater than tensile strength of fabric, fabric destruction was occurred before the sewing thread destruction. When tensile strength of the fabric was greater than seam strength, the sewing thread destruction was occurred. Resistance to slippage of yarns got greater as tensile strength of the fabric got greater. The plain-weave fabric, which tensile strength of fabric was smaller, showed the greater resistance to slippage of yarns than twill and satin weave fabrics. The stretch fabric revealed the optimal lining fabric with the greatest resistance to slippage of yarns.