• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.678-682
• /
• 1996

Acoustic emission(AE) is monitored during end milling with a sensor attached to the cutting fluid discharge nozzle. Cutting forces are also measured and compared with the AE signals to examine the reliability of the AE signals. It is demonstrated that the AE signals provide reliable informations about the cutting processes and tool states. Moreover, edge chipping and fracture of tools can be successfully detected using both the AE signals and cutting forces.

• 한국지반공학회지:지반
• /
• 제7권3호
• /
• pp.21-32
• /
• 1991

본 연구에서는 복합 zone을 가진 rockfill dam성토 재료의 강도정수들과 core zone에서의 간극 수압의 불확정성을 고려할 수 있도록, 성토 재료의 공간적인 변화의 불확실성, 시료수의 제한에 의 한 불확정성에 실험실 결과와 현장 결과와의 차이에 따른 model 오차의 영향을 고려한 종합적인 설계변수들의 불확정성을 규명하였으며 core zone의 간극수압과 rockfill zone의 내부 마찰각을 bayeg 이론을 이용하여 불확정성을 Updating할 수 있는 방법을 제시하였다. 사면 안정 해석에서 시공직후 상, 하류, 만수위 상, 하류 수위, 급강하 시의 2차원 사면안정해석 과 end effect 영향을 고려한 3차원사면 안정해석을 하였다. 본 목적을 위하여 복합 zone을 가진 rockfill dam의 사면 안정해석에서 end effect의 영향을 고려한 3차원 사면안정해석 Program인 "ESTABL"을 개발하였으며, 파괴 사면의 강도정수와 간극수압의 변동계수를 구하는 프로그램 "COV", 복합 zone사면 안전율의 변동계수를 구하는 프로그램 "PCOV"을 개발하였다. 사면안정해석 결과 3차원안전율이 2차원안전율보다 약 200A정도 크게 나타나므로 end restraint 효과가 상당히 큼을 알 수 있다. 3차원사면안정은 근본적으로 system reliability 문제이 므로 안전율의 평균간보다 그 불확정성이 더 큰 영향을 미침을 보여준다. 또한 기초설계 치로 설계 를 마친후 시공중 혹은 추가로 각종 계측치가 있을 때 updating 이론을 이용하여 신뢰도를 증가시 킬 수 있음을 보여주며 강도계수의 변화에 의한 파괴확률의 변화는 점착력의 불확정성이 내부마찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.229-239
• /
• 2013

This paper reports a manner to use a Bayesian approach to derive the optimal replacement policy. In order to produce a system with minimal repair warranty, a replacement model with the extended warranty is considered. Within the warranty period, the failed system is minimally repaired by the manufacturer at no cost to the end-user. The failure time is assumed to follow a Weibull distribution with unknown parameters. The expected cost rate per unit time, from the end-user's viewpoints, is induced by the Bayesian approach, and the optimal replacement policy to minimize the cost rate is proposed. Finally, a numerical example illustrating to derive the optimal replacement policy based on the Bayesian approach is described.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.71-76
• /
• 2008

Micro end-milling is one of effective technology that is able to do ultra-precision machining while increasing the productivity and has wide application field. But selection of machining condition is very difficult because of complicated machining mechanism. Therefore this study was carried out to select working factors to get the optimum surface roughness. Machining condition are depth of cut, feed rate and spindle revolution. The result of this study showed that Surface roughness was affected, in the other of depth of cut, spindle revolution, feed rate. And this study provided an regression equation relating surface roughness to working factors through Regression Analysis and determination coefficient of regression equation had a satisfactory reliability of 79%.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.189-200
• /
• 2023

Silicate glass is usually a brittle and plate-like material, and it is difficult to measure the elastic modulus by the traditional method. This paper develops a test method for the glass elastic modulus based on the fundamental frequency of the cantilever beam with an elastic support and a free end. The method installs the beam-type specimen on a semi-rigid support to form an elastic support-free end beam. The analytic solution of the stiffness coefficients of the elastic support is developed by the fundamental frequency of the two specimens with known elastic modulus. Then, the glass elastic modulus is measured by the fundamental frequency of the specimens. The method significantly improves the measurement accuracy and is suitable for the elastic modulus with the beam-type specimen whether the glass is homogeneous or not. Several tests on the elastic modulus measurement are conducted to demonstrate the reliability and validity of the test method.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.51-55
• /
• 2008

High영상, High품질, 양방향성을 요구하는 BcN은 음성전화, 방송, 데이터 인터넷서비스가 모두 가능해지며 고유한 통신서비스 영역을 허물어 버렸다. 또한, 새로운 비즈니스와 ISP에게 안정적으로 품질이 보장되는 정보통신과 High품질 멀티미디어 서비스를 위해 신뢰성 있는 멀티캐스팅 품질보장 메커니즘이 요구 되어진다. 이와 같은 서비스 제공을 위해서는 End-to-End QoS가 보장되는 멀티캐스트 메커니즘이 제공 되어야 하며 사용자가 요구하는 패킷 손실률이나 전송지연 요구사항을 보장과 신뢰성 있는 멀티캐스트 Path망이 제공되어야 한다. 이를 위해 본 논문에서는 IP기반 멀티캐스트 신규 조인시 연결 수락을 효과적으로 할수 있는 Probing 패킷 기반의 멀티캐스트 메커니즘을 제시하고 ns-2를 이용한 성능분석를 제시 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권2호
• /
• pp.271-287
• /
• 2013

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1675-1689
• /
• 2000

We present CReMeS a CORBA-compliant design and implementation of a new real-time communication service. It provides for efficient predictable and scalable communication between information producers and consumers. The CReMeS architecture is based on MidART's Real-Time Channel-based Reflective Memory (RT-CRM) abstraction. This architecture supports the separation of QoS specification between producer and consumer of data and employs a user-level scheduling scheme for communicating real-time tasks. These help us achieve end-to-end predictability and allows our service to scale. The CReMeS architecture provides a CORBA interface to applications and demands no changes to the ORB layer and the language mapping layer. Thus it can run on non real-time Off-The-Shelf ORBs enables applications on these ORBs to have scalable and end-to-end predictable asynchronous communication facility. In addition an application designer can select whether to use an out-of-band channel or the ORB GIOP/IIOP for data communication. This permits a trade-off between performance predictability and reliability. Experimental results demonstrate that our architecture can achieve better performance and predictability than a real-time implementation of the CORBA Even Service when the out-of-band channel is employed for data communication it delivers better predictability with comparable performance when the ORB GIOP/IIOP is used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권12호
• /
• pp.3081-3099
• /
• 2012

We propose a new multipath-based reliable routing protocol on MANETs, Multipath-based Reliable routing protocol with Fast-Recovery of failures (MRFR). For reliable message transmission, MRFR tries to find the most reliable path between a source and a destination considering the end-to-end packet reception reliability of the routes. The established path consists of a primary path that is used to transmit messages, and the secondary paths that are used to recover the path when detecting failures on the primary path. After establishing the path, the source transmits messages through the primary path. If a node detects a link failure during message transmission, it can recover the path locally by switching from the primary to the secondary path. By allowing the intermediate nodes to locally recover the route failure, the proposed protocol can handle the dynamic topological change of the MANETs efficiently. The simulation result using the QualNet simulator shows that the MRFR protocol performs better than other protocols in terms of the end-to-end message delivery ratio and fault-tolerance capability.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.151-160
• /
• 2009

While portable and wireless devices are pouring, a new network technology is needed as a breakthrough. The new network technology features large delays, intermittent connectivity, and absence of an end-to-end path from sources to destinations. A network which has one of those characteristics is called DTNs(Delay Tolerant Networks). The main 4 routing methods have been researched so far in extream environment. In this paper, we look into the reliability of DTMNs(Delay Tolerant Mobile Networks) in several different situations, and propose an algorithm that selects a positive routine by sending the only information of its position when making a connection to a detected node. We simulate the proposed algorithm here in DTN using ONE simulator. As a result, it shows that the algorithm reduces the number of message transmission each node.