• Title/Summary/Keyword: End-to-end performance

Search Result 4,065, Processing Time 0.035 seconds

Assessment of the Effect of Dimethyl Ether (DME) Combustion on Lettuce and Chinese Cabbage Growth in Greenhouse (온실에서 상추와 배추를 이용한 DME 원료 난방 효율분석)

  • Basak, Jayanta Kumar;Qasim, Waqas;Khan, Fawad;Okyere, Frank Gyan;Lee, Yongjin;Arulmozhi, Elanchezhian;Park, Jihoon;Cho, Wonjun;Kim, Hyeon Tae
    • Journal of Bio-Environment Control
    • /
    • v.28 no.4
    • /
    • pp.293-301
    • /
    • 2019
  • The experiment was conducted to determine the performance of DME combustion gas when used as a fuel for DME burner for raising temperature and $CO_2$ concentration in greenhouse and also to examine its effects on chlorophyll content, and fresh and dry weight of lettuce and Chinese cabbage. DME-1 and DME-2 treatments consisted of average DME flow quantity in duct were $17.4m^3min^{-1}$ and $10.2m^3min^{-1}$ respectively to greenhouse-1 and greenhouse-2 and no DME gas was supplied to greenhouse-3 which was left as control (DME-3). DME supply times were $0.5hr\;day^{-1}$, $1hr\;day^{-1}$, $1:30hrs\;day^{-1}$ and $2hrs\;day^{-1}$ on week 1, 2, 3, and 4 respectively. Chlorophyll content and fresh and dry weight of lettuce and Chinese cabbage were measured for each treatment and analyzed through analysis of variance with a significance level of P<0.05. The result of the study showed that $CO_2$ concentration increased up to 265% and 174% and the level of temperature elevated $4.8^{\circ}C$ and $3.1^{\circ}C$ in greenhouse-1 and 2, respectively as compared to greenhouse-3 due to application of DME combustion gas. Although, the same crop management practices were provided in greenhouse-1, 2 and 3 at a same rate, the highest change (p<0.05) of chlorophyll content, fresh weight and dry weight were found from the DME-1 treatment, followed by DME-2. As a result, DME combustion gas that raised the level of temperature and $CO_2$ concentration in the greenhouse-1 and greenhouse-2, might have an effect on growth of lettuce and Chinese cabbage. At end of experiment, the highest fresh and dry weight of lettuce and Chinese cabbage were measured in greenhouse-1 and followed by greenhouse-2. Similarly chlorophyll content of greenhouse-1 and greenhouse-2 were more compared to greenhouse-3. In general, DME was not producing any harmful gas during its combustion period, therefore it can be used as an alternative to conventional fuel such as diesel and liquefied petroleum gas (LPG) for both heating and $CO_2$ supply in winter season. Moreover, endorsed quantify of DME combustion gas for a specified crop can be applied to greenhouse to improve the plant growth and enhance yield.

Effects of Dietary Energy, Protein on Growth and Blood Composition in Cross-bred with Korean Native Chicks (사료 단백질 및 에너지 수준이 재래닭의 성장과 혈액의 성상에 미치는 영향)

  • Lee, H.S.;Kang, B.S.;Na, J.C.;Ryu, K.S.
    • Korean Journal of Poultry Science
    • /
    • v.35 no.4
    • /
    • pp.399-405
    • /
    • 2009
  • Two experiments were conducted to establish the basic data of feeding system in cross-bred Korean native chicks. A total of seven hundred twenty chicks were replaced the 36 floor pen for the first five weeks with $3{\times}3$ factorial design in Experiment 1. Four hundred eighty of five weeks old chicks were raised from six to ten weeks of age with $3{\times}2$ factorial design in Experiment 2. Dietary ME and CP were formulated to contain 3,000, 3,050, 3,100 kcal/kg and 21, 22, 23%, respectively in Experiment 1 and 3,050, 3,100, 3,150 kcal/kg and 18, 19% in Experiment 2. Weight gain, feed intake were measured and calculated the feed conversion. Blood were collected and analyzed at the end of experiments. In Experiment 1, weight gain showed significantly higher in 3,050, 3,100 kcal/kg treatments than 3,000 kcal/kg treatment (P<0.05), but was not different in CP treatments. Feed intake was statistically high in 3,000 kcal/kg treatment compared with 3,050 and 3,100 kcal/kg ones (P<0.05), and more increased in 21% CP treatments compared to that of 22 and 23 CP treatment (P<0.05). Feed conversion of birds fed 3,050 and 3,100 kcal/kg diet showed much lower than 3,000 kcal/kg treatments (P<0.05). FCR was signicantly improved (P<0.05) in chicks fed diets containing 21 and 22% CP as compared to that fed 20% CP. Blood protein, glucose, and total cholesterol tended to increase in high energy and diet treatments. Blood HDL was increased as dietary energy increased, whereas LDL increased in low CP treatments. In Experiment 2, weight gain was not consistent between treatments, but more increased in 18% CP treatments compared to that of 19% CP treatment from six to ten weeks old in cross bred chicks (P<0.05). Feed intake was similar to the result of weight gain, but more increased in 19% CP treatment than 18% CP treatment (P<0.05). There were no statistically difference in FCR, but seemed to improve as dietary ME increased. Blood total protein and glucose increased as dietary CP was high, but triglyceride and HDL increased in high versus low ME (P<0.05). The results of these experiments suggested that optimum dietary ME and CP, were 3,050, 3,150kcal/kg and 22, 19% for the first five weeks and second one, respectively.

Science Teachers' Diagnoses of Cooperative Learning in the Field (과학교사들이 진단한 과학과 협동학습의 실태)

  • Kwak, Young-Sun
    • Journal of the Korean earth science society
    • /
    • v.22 no.5
    • /
    • pp.360-376
    • /
    • 2001
  • This qualitative research investigated in-service science teachers' perceptions about cooperative learning and their perceived barriers in implementing cooperative learning in their classrooms. The underlying premise for cooperative learning is founded in constructivist epistemology. Cooperative learning (CL) is presented as an alternative frame to the current educational system which emphasizes content memorization and individual student performance through competition. An in-depth interview was conducted with 18 in-service science teachers who enrolled in the first-class teacher certification program during 2001 summer vacation. These secondary school teachers's interview data were analyzed and categorized into three areas: teachers' definition of cooperative learning, issues with implementing cooperative learning in classrooms, and teachers' and students' responses towards cooperative learning. Each of these areas are further subdivided into 10 themes: teachers' perceived meaning of cooperative learning, the importance of talk in learning, when to use cooperative learning, how to end a cooperative class, how to group students for cooperative learning, obstacles to implementing cooperative learning, students' reactions to cooperative learning, teachers' reasons for choosing (not choosing) student-centered approaches to learning/teaching, characteristics of teachers who use cooperative learning methods, and teachers' reasons for resisting cooperative learning. Detailed descriptions of the teachers' responses and discussion on each category are provided. For the development and implementation of CL in more classrooms, there should be changes and supports in the following five areas: (1) teachers have to examine their pedagogical beliefs toward constructivist perspectives, (2) teacher (re)education programs have to provide teachers with cooperative learning opportunities in methods courses, (3) students' understanding of their changed roles (4) supports in light of curriculum materials and instructional resources, (5) supports in terms of facilities and administrators. It's important to remember that cooperative learning is not a panacea for all instructional problems. It's only one way of teaching and learning, useful for specific kinds of teaching goals and especially relevant for classrooms with a wide mix of student academic skills. Suggestions for further research are also provided.

  • PDF

Southeast Asia and ASEAN in 2016: Disappointing Records and Increasing Uncertainty (동남아와 아세안 2016: 기대와 혼돈 속에 커져가는 불확실성)

  • SHIN, Yoon Hwan
    • The Southeast Asian review
    • /
    • v.27 no.1
    • /
    • pp.95-129
    • /
    • 2017
  • This study surveys and reviews political change, economic performance, and regional cooperation that were carried out in 2016 by Southeast Asian countries and ASEAN. This paper reports that what has followed the inauguration of new governments in Myanmar, the Philippines, Vietnam, and Laos fails to live up to the expectation and optimism that arose in the aftermath of elections and party congresses that took place in the first half of the year. In other countries such as Malaysia, Thailand, and Cambodia, where authoritarian regimes are faced with strong oppositions, the prospects for democratic change worsened to a substantial degree, as schisms and internal strives complicated the opposition camp as a result of instigation and intervention by the authoritarian leaders and their followers. In stable political systems, both democratic and authoritarian, no significant changes that may entail serious political implications were noticed. In 2016, the national economy of almost each and every country continued its slow but steady recovery that had started in 2014 and grew by 5% on the average. For 2017 onward, however, the earlier optimism that it would grow at least as fast dimmed down as uncertainty about the world economy looms larger due to the unexpected win by Donald Trump as U.S. president and the expected 'hard landing' of the Chinese economy around 2018. ASEAN declared the launch of the ASEAN Economic Community (AEC) only one day before the New Year, but its track record looked already bad and unpromising by the end of 2016. ASEAN leaders were tied up by their domestic politics and affairs too tightly to take time off to work seriously to observe the schedule as laid out in the AEC Blueprint 2025. Korea's relationship with Southeast Asian countries and ASEAN was "as good as it gets" in 2016 as ever but could become subject to tough review in the near future, if the Ministry of Foreign Affairs is found out to have been implicated in the ongoing Choi Sun Sil scandal and if the opposition wins the next presidential election to be held by this year.

Nanoscale Pattern Formation of Li2CO3 for Lithium-Ion Battery Anode Material by Pattern Transfer Printing (패턴전사 프린팅을 활용한 리튬이온 배터리 양극 기초소재 Li2CO3의 나노스케일 패턴화 방법)

  • Kang, Young Lim;Park, Tae Wan;Park, Eun-Soo;Lee, Junghoon;Wang, Jei-Pil;Park, Woon Ik
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.27 no.4
    • /
    • pp.83-89
    • /
    • 2020
  • For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

Assessment of water supply reliability in the Geum River Basin using univariate climate response functions: a case study for changing instreamflow managements (단변량 기후반응함수를 이용한 금강수계 이수안전도 평가: 하천유지유량 관리 변화를 고려한 사례연구)

  • Kim, Daeha;Choi, Si Jung;Jang, Su Hyung;Kang, Dae Hu
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.12
    • /
    • pp.993-1003
    • /
    • 2023
  • Due to the increasing greenhouse gas emissions, the global mean temperature has risen by 1.1℃ compared to pre-industrial levels, and significant changes are expected in functioning of water supply systems. In this study, we assessed impacts of climate change and instreamflow management on water supply reliability in the Geum River basin, Korea. We proposed univariate climate response functions, where mean precipitation and potential evaporation were coupled as an explanatory variable, to assess impacts of climate stress on multiple water supply reliabilities. To this end, natural streamflows were generated in the 19 sub-basins with the conceptual GR6J model. Then, the simulated streamflows were input into the Water Evaluation And Planning (WEAP) model. The dynamic optimization by WEAP allowed us to assess water supply reliability against the 2020 water demand projections. Results showed that when minimizing the water shortage of the entire river basin under the 1991-2020 climate, water supply reliability was lowest in the Bocheongcheon among the sub-basins. In a scenario where the priority of instreamflow maintenance is adjusted to be the same as municipal and industrial water use, water supply reliability in the Bocheongcheon, Chogang, and Nonsancheon sub-basins significantly decreased. The stress tests with 325 sets of climate perturbations showed that water supply reliability in the three sub-basins considerably decreased under all the climate stresses, while the sub-basins connected to large infrastructures did not change significantly. When using the 2021-2050 climate projections with the stress test results, water supply reliability in the Geum River basin was expected to generally improve, but if the priority of instreamflow maintenance is increased, water shortage is expected to worsen in geographically isolated sub-basins. Here, we suggest that the climate response function can be established by a single explanatory variable to assess climate change impacts of many sub-basin's performance simultaneously.

Effects of a Chelated Copper as Growth Promoter on Performance and Carcass Traits in Pigs

  • Zhao, J.;Allee, G.;Gerlemann, G.;Ma, L.;Gracia, M.I.;Parker, D.;Vazquez-Anon, M.;Harrel, R.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.27 no.7
    • /
    • pp.965-973
    • /
    • 2014
  • Three studies were conducted to investigate whether a chelated Cu can replace $CuSO_4$ as a growth promoter in pigs. In Exp. 1, a total of 240 piglets (Large White${\times}$Landrace, $7.36{\pm}0.10kg$) were randomly allocated to 1 of 3 treatments with 8 replicates and 10 piglets per pen. Treatments included a NRC control ($CuSO_4$, 6 mg/kg), two Cu supplementations from either $CuSO_4$ or $Cu(HMTBa)_2$ at 170 mg/kg. Pigs fed $Cu(HMTBa)_2$ were 6.0% heavier than pigs fed either the NRC control or 170 mg/kg $CuSO_4$ (p = 0.03) at the end of the experiment. During the 42 days of experimental period, pigs fed $Cu(HMTBa)_2$ gained 9.0% more (p = 0.01), tended to eat more feed (p = 0.09), and had better feed efficiency (p = 0.06) than those fed $CuSO_4$. Compared with the 6 mg/kg $CuSO_4$ NRC control, liver Cu was increased 2.7 times with 170 mg/kg $CuSO_4$ supplementation, and was further increased with $Cu(HMTBa)_2$ (4.5 times, p<0.05). In Exp. 2, a total of 616 crossbred piglets (PIC, $5.01{\pm}0.25kg$) were randomly allocated to 1 of 4 treatments with 7 replicates and 22 piglets per pen. Treatments included a NRC control (from $CuSO_4$), and three pharmaceutical levels of Cu (150 mg/kg) supplemented either from C$CuSO_4$, tri-basic copper chloride ($Cu_2[OH]_3C1$), or $Cu(HMTBa)_2$. Pigs fed $CuSO_4$ or $Cu(HMTBa)_2$ had better feed efficiency (p = 0.01) and tended to gain more (p = 0.08) compared with those fed the NRC control. Pigs fed $Cu_2[OH]_2C1$ were intermediate. Pigs fed $Cu(HMTBa)_2$ had the highest liver Cu, which was significantly higher than those fed ($Cu_2[OH]_3C1$) or the negative control (p = 0.01). In Exp. 3, a total of 1,048 pigs (PIC, $32.36{\pm}0.29kg$) were allotted to 6 treatments with 8 replicates per treatment and 20 to 22 pigs per pen. The treatments included a NRC control with 4 mg/kg Cu from $CuSO_4$, a positive control with 160 mg/kg Cu from $CuSO_4$, and incremental levels of $Cu(HMTBa)_2$ at 20, 40, 80, and 160 mg/kg. During the overall experimental period of 100 days, no benefit from 160 mg/kg $CuSO_4$ was observed. Pigs fed $Cu(HMTBa)_2$ had increased ADG (linear and quadratic, $p{\leq}0.05$) and feed efficiency (linear and quadratic, $p{\leq}0.05$) up to 80 mg/kg and no further improvement was observed at 160 mg/kg for the whole experimental period. Pigs fed 80 mg/kg $Cu(HMTBa)_2$ weighed 1.8 kg more (p = 0.07) and were 2.3 kg heavier in carcass (p<0.01) compared with pigs fed 160 mg/kg $CuSO_4$. In addition, loin depth was increased with increased $Cu(HMTBa)_2$ supplementation with pigs fed 80 mg/kg $Cu(HMTBa)_2$ had the greatest loin depth (p<0.05). In summary, $Cu(HMTBa)_2$ can be used to replace high $CuSO_4$ as a growth promoter in nursery and grower-finisher pigs.

A Comparison of the Overall Satisfaction of the Tourist Attractions at the Terelj Tourist Area in Mongolia by Mongolian and Korean Travelers (몽골 테렐지 관광지 관광자원 매력에 관한 몽·한 관광객 만족도 비교 분석)

  • Kim, Dong-Chan;Byambajamts, Nasanjargal
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.41 no.6
    • /
    • pp.96-106
    • /
    • 2013
  • The aim of this study was to reveal the advantages and disadvantages of Terelj Mongolian National Park based on the impressions of foreign and domestic travelers, and subsequently suggest supporting ideas to make this tourist attraction more enjoyable for travelers. A statistical program(SPSS 20.0) and an IPA matrix method were used to reveal the impressions of travelers and the results showed the following ideas. First, we made the technical analyses to demonstrate the characteristics of the current natural scenery which travelers want to see and the results indicated that both Korean and Mongolian travelers overall were not satisfied and the Park was not as they had imagined. The second part of the research highlighted the differences between the impressions held by Mongolian and Korean travelers, which showed dissimilarities in cultural resources, food, variety of events, cultural functions and parking, all of which were shown as important criteria in sightseeing. The variations were found in scenes of nature, variety of programs, and food, areas which revealed and were very important in the overall satisfaction of travelers. Third, the IPA method was used for analyze the advantages and disadvantages of Terelj National Park. The Mongolian travelers nominated the width of the road, cleanliness, variety of events and parking are the most essential things to feel satisfied, but Koreans selected safety of travel, accommodation, the width of the road and cleanliness. Finally, we analyzed the feelings of the travelers at the end of their trip. The Mongolian travelers preferred the area resource and environment convenience to feel satisfaction. For Korean travelers, the area resource is the most important when choosing travelling sights. Based on these results, if we take responsibility to protect the beauty of nature, and create a sightseeing place using natural sources, while also making more comfortable accommodations and improving the services, it can be a more unique place than others and lead to greater overall satisfaction for travelers.

The Optimal TDN Levels of Concentrates and Slaughter Age in Hanwoo Steers (거세한우에 있어서 배합사료의 적정 TDN 수준과 도축 월령)

  • Kim, K.H.;Lee, J.H.;Oh, Y.G.;Kang, S.W.;Lee, S.C.;Park, W.Y.;Ko, Y.D.
    • Journal of Animal Science and Technology
    • /
    • v.47 no.5
    • /
    • pp.731-744
    • /
    • 2005
  • Ninety Hanwoo steers(initial BW=167.2$\pm$13.4kg) were used to determine the effect of energy concentrations in concentrates and slaughter age on performance, carcass characteristics. Steers were allotted by BW to one of eighteen pens. Eighteen pens were randomly allotted to a low(70-70-71-72% for the growing, the early, the middle or the late fattening periods), medium(70-71-72-73%) or high(70-72- 73-74%) TDN level of concentrates. Five steers for each treatment of energy level were slaughtered every one month from 26 month of age to 31 month of age. Concentrates was fed restrictedly to achieve a predicted gain of 0.7-0.9kg from growing stage to middle fattening stage. All steers were fed orchard grass(Dactylis glomerata L.) hay as roughage during the growing period, fed rice straw gradually substituted for orchard grass hay during the early fattening period, and fed rice straw only thereafter. Overall body weight and feed intake were not affected by TDN levels of concentrates. Average daily gain for all treatments was higher than 0.9kg/d during the 19-21 month of age and decrease thereafter, but sustained above 0.7kg/d. Mean concentrates intake for all treatments was 1.0-1.3% of live BW during the growing period and 1.5% during the early fattening. Thereafter, it decreased up to 1.4% during the middle fattening and 1.0% during late fattening period. Delay of slaughter end point resulted in a gradual increase of rib-eye area, back fat thickness and marbling score, especially after slaughter age of 29 month there was significant increases(P<0.05). The appearance rate of 1+ and 1 grade related to the slaughter ages was 100% at 29, 30 and 31 months of age, whereas those at 26, 27 and 28 months were 93, 86 and 80%, respectively. Dressing rate was significantly(P<0.05) increased and rate of retailed cut weight significantly(P<0.05) decreased when slaughter age increased. In economic analysis, there was pronounced increase in net income up to 32-46% after slaughter age of 29 months. Under the conditions of this study, high TDN intake is not necessarily required for high quality Hanwoo meat production and slaughter age of 29 month might be the optimum for Hanwoo steers.

A Qualitative Study on the Cause of Low Science Affective Achievement of Elementary, Middle, and High School Students in Korea (초·중·고등학생들의 과학 정의적 성취가 낮은 원인에 대한 질적 연구)

  • Jeong, Eunyoung;Park, Jisun;Lee, Sunghee;Yoon, Hye-Gyoung;Kim, Hyunjung;Kang, Hunsik;Lee, Jaewon;Kim, Yool;Jeong, Jihyeon
    • Journal of The Korean Association For Science Education
    • /
    • v.42 no.3
    • /
    • pp.325-340
    • /
    • 2022
  • This study attempts to analyze the causes of low affective achievement of elementary, middle, and high school students in Korea in science. To this end, a total of 27 students, three to four students per grade, were interviewed by grade from the fourth grade of elementary school to the first grade of high school, and a total of nine teachers were interviewed by school level. In the interview, related questions were asked in five sub-areas of the 'Indicators of Positive Experiences about Science': 'Science Academic Emotion', 'Science-Related Self-Concept', 'Science Learning Motivation', 'Science-Related Career Aspiration', and 'Science-Related Attitude'. Interview contents were recorded, transcribed, and categorized. As a result of examining the causes of low science academic emotion, it was found that students experienced negative emotions when experiments are not carried out properly, scientific theories and terms are difficult, and recording the inquiry results is burdensome. In addition, students responded that science-related self-concept changed negatively due to poor science grades, difficult scientific terms, and a large amount of learning. The reasons for the decline in science learning motivation were the lack of awareness of relationship between science class content and daily life, difficulty in science class content, poor science grades, and lack of relevance to one's interest or career path. The main reason for the decline in science-related career aspirations was that they feel their career path was not related to science, and due to poor science performance. Science-related attitudes changed negatively due to difficulties in science classes or negative feelings about science classes, and high school students recognized the ambivalence of science on society. Based on the results of the interview, support for experiments and basic science education, improvement of elementary school supplementary textbook 'experiment & observation', development of teaching and learning materials, and provision of science-related career information were proposed.