• Animal Bioscience
• /
• v.34 no.5
• /
• pp.914-921
• /
• 2021

Objective: The objective of this study was to compare growth performance, carcass traits and meat quality in young bulls, steers and heifers produced by crossing Limousin bulls with Holstein-Friesian cows, fattened semi-intensively and slaughtered at 18 months of age. Methods: Thirty-one young calves were reared in a conventional production system, and were fed milk replacer, hay and concentrate. At 6 months of age, the animals were divided into groups based on gender, and were fed a total mixed ration composed of grass silage, concentrates I and II in a semi-intensive production system. At the end of the fattening period (18 months), the animals were slaughtered, carcass quality was evaluated, and samples of musculus longissimus thoracis were collected to determine the proximate composition and quality of meat. Results: Bulls were characterized by the highest percentage share of the most valuable cuts in the carcass, and three-rib sections from bull carcasses had the highest lean meat content with low intramuscular fat content (0.93%). No significant differences in carcass conformation, dressing percentage or the percentage share of round in the right half-carcass were found between bulls vs. steers and heifers. Heifers and steers had higher carcass fat content than bulls, which had a positive influence on the sensory properties of beef. In comparison with the meat of bulls, the meat of steers and heifers was characterized by more desirable physical properties and sensory attributes (water-holding capacity, shear force, color lightness, aroma, juiciness, tenderness, flavor). Conclusion: Under the semi-intensive production system, heifers and steers had higher carcass fat content than bulls, which had a positive effect on the sensory properties of beef. Bulls are better suited for intensive systems, which contribute to improving the quality of their meat. The results of this study may encourage producers to breed steers and heifers for beef.

• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.513-521
• /
• 2020

In this paper, due to the need for cutting cement-soil group pile composite foundation under the 7-story masonry structure of Zhenghe District and the shield tunnel of Zhengzhou Metro Line 5, a field test was conducted to directly cut cement-soil single pile composite foundation with diameter Ф=500 mm. Research results showed that the load transfer mechanism of composite foundation was not changed before and after shield tunnel cut the pile, and pile body and the soil between piles was still responsible for overburden load. The construction disturbance of shield cutting pile is a complicated mechanical process. The load carried by the original pile body was affected by the disturbance effect of pile cutting construction. Also, the fraction of the load carried by the original pile body was transferred to the soil between the piles and therefore, the bearing capacity of composite foundation was not decreased. Only the fractions of the load carried by pile and the soil between piles were distributed. On-site monitoring results showed that the settlement of pressure-bearing plates produced during shield cutting stage accounted for about 7% of total settlement. After the completion of pile cutting, the settlements of bearing plates generated by shield machine during residual pile composite foundation stage and shield machine tail were far away from residual pile composite foundation stage which accounted for about 15% and 74% of total settlement, respectively. In order to reduce the impact of shield cutting pile construction on the settlement of upper composite foundation, it was recommended to take measures such as optimization of shield construction parameters, radial grouting reinforcement and "clay shock" grouting within the disturbance range of shield cutting pile construction. Before pile cutting, the pile-soil stress ratio n of composite foundation was 2.437. After the shield cut pile is completed, the soil around the lining structure is gradually consolidated and reshaped, and residual pile composite foundation reaches a new state of force balance. This was because the condensation of grouting layer could increase the resistance of remaining pile end and friction resistance of the side of the pile.

• Computers and Concrete
• /
• v.27 no.3
• /
• pp.199-210
• /
• 2021

The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical method and FEM. The FG layer is made of non-homogeneous material with an isotropic stress-strain law with exponentially varying properties. It is assumed that the contact at the FG layer-half plane interface is frictionless, and only the normal tractions can be transmitted along the contacted regions. The body force of the FG layer is considered in the study. The FG layer was positioned on the homogeneous half plane without any bonds. Thus, if the external load was smaller than a certain critical value, the contact between the FG layer and half plane would be continuous. However, when the external load exceeded the critical value, there was a separation between the FG layer and half plane on the finite region, as discontinuous contact. Therefore, there have been some steps taken in this study. Firstly, an analytical solution for continuous and discontinuous contact cases of the problem has been realized using the theory of elasticity and Fourier integral transform techniques. Then, the problem modeled and two-dimensional analysis was carried out by using ANSYS package program based on FEM. Numerical results for initial separation distance and contact stress distributions between the FG layer and homogeneous half plane for continuous contact case; the start and end points of separation and contact stress distributions between the FG layer and homogeneous half plane for discontinuous contact case were provided for various dimensionless quantities including material inhomogeneity, distributed load width, the shear module ratio and load factor for both methods. The results obtained using FEM were compared with the results found using analytical formulation. It was found that the results obtained from analytical formulation were in perfect agreement with the FEM study.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.215-219
• /
• 2021

The flow analyses around the wing of airplane installed with winglet or sharkelt were carried out in this study. At the model without winglet, it can be seen that the air flows beside the wing and the flow is concentrated at the end of wing. At the model of winglet or sharklet, the pressure on the bottom of the wing happens to be lower in the wide area than for model without winglet. At the analysis result, the air flowing next to the wing can be seen to go over and rotates over the main wing. The model with the sharklet shows that the flow rate is the fastest. In case of model with sharklet, it is thought that the maximum total pressure of flow is distributed at the bottom of the wing, which can further improve the lift force of the wing. It is thought that the analysis results in this study on the air flow due to the configuration of aircraft edge wing can be helped at its convergent research.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.4
• /
• pp.23-54
• /
• 2021

The purpose of this article is to discuss about the service functions and strategies that Korean libraries should develop and practice for the aged baby-boomers, who are going to become an central force among the Korean Elderly. To the end, the first discussion is about the usual problems that Korean baby-boomers are facing with in their daily life. Secondly investigated are the universal characteristics in their information needs and seeking behavior. And the third discussion is on identifying both various cases and structural causes of information poverty that Korean baby-boomers have been troubled with. And finally suggested are strategic guidelines for the librarians who are willing to develop and practice library services specialized for baby-boomers.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.1-9
• /
• 2022

Most factories deal with toxic or flammable chemicals in their industrial processes. These hazardous substances pose a risk of leakage due to accidents, such as fire and explosion. In the event of chemical release, massive casualties and property damage can result; hence, quantitative risk prediction and assessment are necessary. Several methods are available for evaluating chemical dispersion in the atmosphere, and most analyses are considered neutral in dispersion models and under far-field wind condition. The foregoing assumption renders a model valid only after a considerable time has elapsed from the moment chemicals are released or dispersed from a source. Hence, an initial dispersion model is required to assess risk quantitatively and predict the extent of damage because the most dangerous locations are those near a leak source. In this study, the dispersion model for initial consequence analysis was developed with three-dimensional unsteady advective diffusion equation. In this expression, instantaneous leakage is assumed as a puff, and wind velocity is considered as a coordinate transform in the solution. To minimize the buoyant force, ethane is used as leaked fuel, and two different diffusion coefficients are introduced. The calculated concentration field with a molecular diffusion coefficient shows a moving circular iso-line in the horizontal plane. The maximum concentration decreases as time progresses and distance increases. In the case of using a coefficient for turbulent diffusion, the dispersion along the wind velocity direction is enhanced, and an elliptic iso-contour line is found. The result yielded by a widely used commercial program, ALOHA, was compared with the end point of the lower explosion limit. In the future, we plan to build a more accurate and general initial risk assessment model by considering the turbulence diffusion and buoyancy effect on dispersion.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.6
• /
• pp.434-445
• /
• 2021

This paper proposes an optimal design method for an unmanned underwater vehicle (UUV) platform to overcome strong current. First, to minimize the hydrodynamic drag components in water, the vehicle is designed to have a streamlined disc shape, which help maintaining horizontal motion (zero roll and pitch angles posture) while overcoming external current. To this end, four vertical thrusters are symmetrically mounted outside of the platform to stabilize the vehicle's horizontal motion. In the horizontal plane, four horizontal thrusters are symmetrically mounted outside of the disc, and each of them has the same forward and reverse thrust performances. With these four thrusters, a specific thrust vector control (TVC) method is proposed, and for external current in any direction, four horizontal thrusters are controlled to generate a vectored thrust force to encounter the current while minimizing the vehicle's rotation and maintaining its heading. However, for the numerical simulations, the vehicle's hydrodynamic coefficients related to the horizontal plane are derived based on both theoretical and empirically derived formulas. In addition to the simulation, experimental studies in both the water tank and circulating water channel are performed to verify the vehicle's various final performances, including its ability to overcome strong current.

• Food Science of Animal Resources
• /
• v.42 no.4
• /
• pp.566-579
• /
• 2022

Deterioration of jerky during storage is a major concern; this is usually combated with natural or synthetic antioxidants. This study aimed to evaluate the quality characteristics of semi-dried restructured jerky with and without loquat leaf extract (LE) powder and ascorbic acid (AA) during storage for 180 days. The jerkies were formulated with 0%, 0.15%, and 0.3% LE and/or 0.05% AA (Control, no antioxidant; AA, 0.05% AA; LE 0.15, 0.15% loquat LE; LE 0.15-AA, 0.15% loquat LE+0.05% AA; LE 0.3, 0.3% loquat LE; LE0.3-AA, 0.3% loquat LE+0.05% AA). LE is a phenolic compound, whose 1,1-diphenyl-2-picrylhydarzyl radical scavenging activity and metal chelating activity were found to be higher than AA. All antioxidant combinations having higher LE concentration and containing AA were effective in delaying protein and lipid oxidation compared to the control or AA. At the end of storage period, LE 0.15-AA and AA had higher CIE a^* and lower shear force than the control. Therefore, the combination of 0.15% LE and 0.05% AA can result in reduced protein and lipid oxidation without any negative effect on the quality characteristics of semi-dried restructured jerky.

• Coupled systems mechanics
• /
• v.10 no.6
• /
• pp.509-520
• /
• 2021

Fiber-reinforced concrete (FRC) is a composite material where small fibers made from steel or polypropylene or similar material are embedded into concrete matrix. In a material model each constituent should be adequately described, especially the interface between the matrix and fibers that is determined with the 'bond-slip' law. 'Bond-slip' law describes relation between the force in a fiber and its displacement. Bond-slip relation is usually obtained from tension laboratory experiments where a fiber is pulled out from a matrix (concrete) block. However, theoretically bond-slip relation could be determined from bending experiments since in bending the fibers in FRC get pulled-out from the concrete matrix. We have performed specially designed laboratory experiments of three-point beam bending with an intention of using experimental data for determination of material parameters. In addition, we have formulated simple layered model for description of the behavior of beams in the three-point bending test. It is not possible to use this 'forward' beam model for extraction of material parameters so an inverse model has been devised. This model is a basis for formulation of an inverse model that could be used for parameter extraction from laboratory tests. The key assumption in the developed inverse solution procedure is that some values in the formulation are known and comprised in the experimental data. The procedure includes measured data and its derivative, the formulation is nonlinear and solution is obtained from an iterative procedure. The proposed method is numerically validated in the example at the end of the paper and it is demonstrated that material parameters could be successfully recovered from measured data.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.657-679
• /
• 2021

This study aimed to explore the experience and nature of emotional care for elderly parent living alone for middle-aged adult who formed initial insecure attachment with his or her parent. To this end, 12 middle-aged people aged 45 to 60 (3 males and 9 females) were recruited as subjects of the study, interviewed in-depth, and analyzed using Colaizzi's phenomenological research method. As a result of the study, 60 constitutive meanings, 18 themes, and 4 thematic groups were derived for the experience of middle-aged adult who experienced insecure attachment to his or her parent and caring for the emotional needs of elderly parent living alone. Thematic groups included "negative experiences that caused emotional exhaustion," "emotional driving force in emotional care," "the role of helper in parental care," and "economic and physical content in emotional care". This study is meaningful in that it revealed the phenomenon of experiences of emotional care for parent living alone by middle-aged adult who had an initial unstable attachment with his or her parent to understand them and contributed to the provision of counseling data.