• 제목/요약/키워드: Enclosure System

검색결과 170건 처리시간 0.023초

불규칙한 3차원 형상에 응용된 구분종좌표보간법 (Discrete Ordinates Interpolation Method Applied to Irregular Three-Dimensional Geometries)

  • 차호진;송태호
    • 대한기계학회논문집B
    • /
    • 제24권6호
    • /
    • pp.814-821
    • /
    • 2000
  • The Discrete Ordinates Interpolation Method (DOIM) is tested in three-dimensional enclosures. The radiative transfer equation (RTE) is solved for a linear source term and the DOIM is formulated for a gray medium. Several interpolation methods can be applied to the DOIM scheme. Among them, the interpolation method applicable to an unstructured grid system is discussed. In a regular hexahedron enclosure, radiative wall heat fluxes are calculated and compared with exact solutions. The enclosure has an absorbing, emitting and nonscattering medium and a constant temperature distribution. These results are obtained with varying optical depths (xD = 0.1, 1.0, 10.0). Also, the same calculations are performed in an irregular hexahedron enclosure. The DOIM is applied to an unstructured grid system as well as a structured grid system for the same regular hexahedron enclosure. They are compared with the exact solutions and the computational efficiencies are discussed. When compared with the analytic solutions, results of the DOIM are in good agreement for three-dimensional enclosures. Furthermore, the DOIM can be easily applied to the unstructured grid system, which proves the reliability and versatility of the DOIM.

밀폐공간 내에서 압전세라믹 냉각홴의 열성능에 대한 실험적 연구 (Experimental Study on the Thermal Performance of Piezoelectric Fan in an Enclosure)

  • 박상희;최문철
    • 대한기계학회논문집B
    • /
    • 제30권12호
    • /
    • pp.1173-1180
    • /
    • 2006
  • This study deals with fluid flow and heat transfer around a module cooled by forced air flow generated by a piezoelectric(PZT) fan in an enclosure. The fluid flows were generated by a flexible PZT fan which deflects inside a fluid transport system of comparatively simple structure mounted on a PCB in an enclosure($270\times260\times90mm^3$). Input voltages of 30V and 40V, and a resonance frequency of 28Hz were used to vibrate the cooling fan. Input power to the module was 4W. The height in an enclosure was changed 23$\sim$43mm. The fluid flow around the module was visualized by using PIV system. The temperature distributions around a heated module were visualized by using liquid crystal film. As the height in an enclosure and the input voltage of PZT fan increased, the cooling effect of module using a PZT fan increased. We found that the flow type was T- or Y-shape and the cooling effect was increased by the wake generated by a PZT fan.

Development of a Novel Sampling Technique for Natureal VOC Emissions

  • Kim, Jo-Chun
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제17권E2호
    • /
    • pp.61-70
    • /
    • 2001
  • In recent years there have been growing interests in the potential environmental effects of global climate change. Of specific interests is the role that climate change may play in altering natural volatile organic compound.(NVOC) emissions from trees and the subsequent impact of this perturbation on air quality and ozone formation. A novel vegetation enclosure chamber method was designed and constructed of Tedlar in order to estimate more accurate and precise NVOC emission rates of either small whole plants or the branches of large trees. The enclosure chamber was initially tested in the laboratory and also successfully evaluated in the field. Overall precision for this enclosure was estimated as RSD<10%(n=9). The overall errors associated with the enclosure method in a laboratory system might be relatively small (say<$\pm$15%); however, they might be rather large(say$\pm$40%) in a field-based system. Two consecutive samples were collected on each sampling day from the two pine species during the test period. Slash pine studies showed that the absolute percentage difference between the first and second samples varied from 0.33 to 29%. The percent differences between consecutive emission for loblolly pines varied from 0.74 to 24.2%.

  • PDF

밀폐공간내의 피가열체 존재시 복합열전달에 관한 연구 (A Study on Combined Heat Transfer in a Enclosure with a Block)

  • 홍성국;유홍선;홍기배;채수
    • 한국안전학회지
    • /
    • 제15권1호
    • /
    • pp.19-27
    • /
    • 2000
  • This paper numerically deals with combined heat transfer in a enclosure with a block. The block affected by hot wall is located centrally in the enclosure with a radiating gray gas. The discrete ordinate method(DOM) was used for solving the radiative transfer equation. Both laminar and turbulent cases were investigated for various Rayleigh number and standard k-$\varepsilon$ model was adopted to turbulent case. The effects of optical thickness, wall emissivity and fluid-solid thermal conductivity ratio are investigated on the flow and temperature fields. This study shows that as the wall emissivity decreases, the temperature distribution gradually becomes uniform and the heat transfer is reduced in enclosure. It is expected that this study can help to design the energy system related to the combined heat transfer and operate it safely.

  • PDF

Thermocline 축열조 측벽에서의 열전도 해석 (Analytical Solution of Two -dimensional Conduction in the Side Wall of a Thermocline System Enclosure)

  • 이준식
    • 대한설비공학회지:설비저널
    • /
    • 제16권1호
    • /
    • pp.103-108
    • /
    • 1987
  • The heat transfer processes taking place in the side wall of a thermocline enclosure have been analyzed for idealized conditions based on the assumption that, at any instant time, side wall heat transfer processses are independent of the thermocline bulk motion. However, the axial tempera-ture distribution in the thermocline core provides the means for specifying the liquid medium-side boundary condition to the enclosure side wall. A picture is drawn which reflects the side wan response to thermocline bulk motion within the frame work of a quasi-steady analytic approach. For valves of the parameters typical of systems of engineering interest, the analysis shows that a significant amount of heat transfer short - circuiting can take place along the side wall enclosure. This phenomenon is favored by high values of $H_l$ and low values of P and $H_g$ respec-tively. The location of the point of zero normal heat flux on the side wan can be expected to mark, approximately, the region of confluence of two sidewall boundary flows respectively driven by the buoyant effects.

  • PDF

밀폐공간 및 강제환기공간에의 천연가스 고압분출 시 농도 확산분포 거동해석 (I) (The Diffusion Behavier Analysis Caused by High Pressure Natural Gas Leak in Enclosure with and without Ventilation System (I))

  • 하태웅;하종만;김은자
    • 한국가스학회지
    • /
    • 제16권4호
    • /
    • pp.23-31
    • /
    • 2012
  • 밀폐 공간 내의 천연가스 공급 시스템에서 가스 누설에 따른 재난을 방지하고 보다 안전한 설계를 하기 위해서는 누출된 천연가스의 확산거동을 이해하고 예측할 수 있는 기술이 필요하다. 본 연구에서는 CFD를 사용한 해석법을 제시하고, 기 수행된 British Gas Technology Co.의 실험결과와 비교하여 타당성을 제시하였다. 노즐에서의 분출유량 2D 해석 결과는 실험결과와 2.6% 이내로 잘 일치함을 보였다. 또한, 다양한 강제 환기 조건에 따른 가스 확산 특성을 비정상상태 3차원 CFD 해석을 수행한 결과 실험결과와 정성적인 경향이 잘 일치됨을 보였다.

개구부를 가지는 실내의 능동소음제어시스템의 최적 트랜스듀서 위치 (Optimal Transducer Positions of an Active Noise Control System with an Opening in an Enclosure)

  • 백광현
    • 한국소음진동공학회논문집
    • /
    • 제14권2호
    • /
    • pp.157-163
    • /
    • 2004
  • Optimal transducer positions are important as much as the control algorithms and hardware performance in the active noise control system. This study is similar to the past researches on the optimal transducer locations but with a far field noise source having a plane wave characteristic and the noise coming through an opening such as a window in an enclosure. Optimization techniques are used to find sets of optimal loudspeaker positions from a larger possible loudspeaker positions. Loudspeakers are placed on the surface of opening at the wall and inside of the enclosure. Using the measured acoustic transfer impedances and numerical simulations with the optimization technique, optimal positions are identified and compared. When a small number of loudspeakers are used. loudspeaker positions on the opening near the center seems to be the best place, but when a larger number of loudspeakers are used it was difficult to find simple patterns in the optimal positions. With the optimally positioned loudspeakers, optimal microphone positions are also studied.

산업용 질소발생기에 대한 청정소화설비로의 적용가능성에 관한 연구 (A Study on the Possibility of Application as a Natural Extinguishing System for $N_2$ Generator)

  • 서병택;장영근
    • 한국화재소방학회논문지
    • /
    • 제24권2호
    • /
    • pp.139-144
    • /
    • 2010
  • 본 연구에서는 산업용으로 일반적으로 사용하고 있는 질소발생기를 사용하여 할론 계열의 소화약제를 대체할 청정소화설비로 적용할 수 있는지에 대한 소화성능 실험을 간단히 수행하였다. 산업용 질소발생기의 소화성능을 분석하기 위하여 간단한 방호구역을 제작하여 실제 질소발생기에서 발생하는 질소가스를방사하면서 방호구역 내의 산소농도 변화를 실험적으로 파악하였다. 실험결과, 현재 많이 사용하고 있는 질소발생기로 방호구역 $100m^3$에 대하여 질소가스를 $5m^3$/min로 방사하면 3분 이내에 방호구역 내의 산소 농도를 15% 이내로 낮추어 질식소화가 충분히 가능하다.

밀폐된 용기 안에서 동시에 회전하는 디스크의 진동과 안정성에 관한 연구 (Vibrations and Stability of Flexible Corotating Disks in an Enclosure)

  • 강남철
    • 한국소음진동공학회논문집
    • /
    • 제19권1호
    • /
    • pp.76-84
    • /
    • 2009
  • The vibration and stability of thin, flexible corotating disks in an enclosed compressible fluid is investigated analytically and compared with the results of a single rotating disk. The discretized dynamical system of the corotating disks is derived in the compact form of a classical gyroscopic system similar with a single disk. For the undamped system, coupled structure-acoustic traveling waves destabilize through mode coalescence leading to flutter instability. However, it is found that the flutter regions of the corotating disks are wider than those of a single disk. A detailed investigation of the effects of dissipation arising from acoustic or disk damping is also performed. Finally, in the presence of both acoustic and disk dampings, the instability regions are found and compared with those of a single disk. Although this study does not allow a radial clearance between the disk and the enclosure, the computational frame work of the problem can be expanded to the system having the radial clearance in an enclosure.

밀폐공간에서의 화재에 의한 연기의 유동 이론 (The Theory of Smoke Movement by a Fire in an Enclosure)

  • 노재성;유홍선
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 1996년도 학술발표회
    • /
    • pp.5-9
    • /
    • 1996
  • In foreign country such as U.S.A and Japan, considerable research has been done regarding the spread of smoke in room of fire involvement by using computer. But, in our country it has not been. So, this paper presents a detailed qualitative description of phenomena which occures during typical fire scenarios through numerical analysis. This research, in the view of field model, is focused on finding out the smoke movement and temperature distribution. And it is planned to analyze governing equation including smoke diffusion equation by numerical analysis with finite volume method and non-staggered grid system. The SIMPLE method for pressure-velocity couple and power-law scheme for convection terms are used. It shows that a plume is formed, hot plume is formed, hot plume gases impinge on the ceiling and they spread across it. then, it eventually reaches the bounding walls of the enclosure. It takes 60s for smoke to fill the enclosure.

  • PDF