• International Journal of Oral Biology
• /
• 제43권1호
• /
• pp.37-42
• /
• 2018

It is noted that Streptococcus mutans (S. mutans) triggers dental caries establishment by two major factors: the synthesis of organic acids, which demineralize dental enamel, and the synthesis of glucans, which mediate the attachment of bacteria to the tooth surface. Therefore, it is noted that the development of a more effective, substantial and safe preventive agent that works against dental caries and periodontal disease is required at this time. For this reason, the present study was designed to investigate the effect of croton seed ethanol extracts on the growth, acid production, adhesion, and insoluble glucan synthesis of S. mutans. In this case, the ethanol extract of croton seed showed concentration dependent inhibitory activity against the growth, acid production and adhesion of S. mutans. Especially, it is important to note that it has produced significant inhibition at the concentration of 0.1 and 0.2 mg/ml as compared to the control group. Moreover, these results suggest that the application of croton seed extract may be considered to be a useful method for the prevention of dental caries.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.288-295
• /
• 1998

The microleakage of direct-access Class 2 restorations was evaluated. Cavities were prepared at mesial and distal proximal enamel surfaces of 20 extracted human molars through buccal window. Prepared cavities were filled with Ketac-Fil, Ketac-Silver, and Fuji II LC, following manufacturer's instructions. 4 specimens of each restorations were made through sectioning 1/4 of bucco-lingual length mesio-distally after thermocycling between $5^{\circ}C$ and $60^{\circ}C$ and imerging 0.5% basic-fuchsin dye solution. Leakage at both occlusal and gingival margin of each specimen was scored 0 to 3 with stereomicroscope. The results were as follows: 1. At occlusal margin, leakage in Ketac-Fil group was more than Ketac-Silver and Fuji II LC group (ANOVA p<0.05) and there was no significant difference between Ketac-Silver and Fuji II LC group(p>0.05), and at gingival margin, there was no significant difference amang materials (p>0.05). 2. Occlusal margin leaked more than gingival margin in Ketac-Silver and Fuji II LC group (t-test p<0.05). 3. Leakage was different according to bucco-lingual location in Ketac-Fil and Fuji II LC group, and lingaul specimen exhibited more leakage(ANOVA p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.269-277
• /
• 1998

This in vitro study compared the microleakage of 4 lining conditions when used with Gallium alloy GF II and Valiant PhD. Class V cavity was prepared on both buccal and lingual surface of 80 extracted human premolar & molar teeth with one margin in enamel and another in dentin. Before restoration, prepared cavities were applied to no-liner, cavity varnish, Scotchbond multipurpose, and Superbond D-liner II plus according to manufacture's instructions. The restored teeth were stored in saline for 1 week, then thermocycled for 100 times, stained with 0.5% basic fuchsin dye for 1 day, sectioned, and observed using a light microscope. Following results were obtained. 1. The leakage value of Superbond-lined group showed significantly lower than that of nolined group on both margins of Valiant PhD(p<0.05). 2; There was no significant difference between the 4 lining conditions in Gallium alloy GF II (p>0.05). 3. When We make a comparison between Gallium alloy GF II and Valiant PhD under same lining conditions, the microleakage value of Gallium alloy GF II showed lower than that of Valiant PhD on occlusal & gingival margin(p<0.05) except for Superbond-lined group(p>0.05).

• 치위생과학회지
• /
• 제23권1호
• /
• pp.60-67
• /
• 2023

Background: In our study, a silver diamine fluoride (SDF) compound for the treatment of dental caries was synthesized to characterize its remineralization activity upon direct application to deciduous teeth. This study aimed to use microscopic computed tomography (microCT) and nanoindentation to evaluate whether SDF composite application could effectively arrest dental caries in five exfoliated primary molars. Methods: Carious teeth were extracted and visually examined using quantitative photofluorescence devices (Qraycam and QraypenTM). After performing microCT, the SDF composite was applied to the teeth according to the manufacturer's instructions. The researchers exchanged and precipitated the irritant saliva once daily for 1 week. The teeth were sectioned longitudinally through the centers of the mesial and distal surfaces, embedded, polished, and measured using nanoindentation. Thereafter, microCT was repeated. Statistical analyses were performed using GraphPad Prism software. Results: Following SDF composite application, a remineralized layer was observed on microCT images, and the hardness increased when measured using nanoindentation. We found that demineralized enamel presented with an increased number of irregular crystals in the deep carious lesion group compared with those in the shallow carious lesion group, resulting in a rougher surface. Conclusion: The SDF composite may be used for remineralization of early caries and cessation of advanced caries in primary molars.

• 한국치위생학회지
• /
• 제17권6호
• /
• pp.969-981
• /
• 2017

Objectives: The present study aimed to evaluate the preventive effects of exposure to liquid fermented milk containing various concentrations of added calcium on dental erosion, and to investigate the optimal concentration of calcium effective in reducing dental erosion. Methods: The present study consisted of a total of 6 experimental groups: a mineral water group, a fermented milk with no added calcium (0%) group, and four fermented milk with various concentrations of added calcium (0.1%, 0.5%, 1%, and 2%) groups. Twelve specimens were immersed for 1, 3, 5 and 10 minutes in each experimental drink and the change in surface microhardness was measured. Additionally, the surface was observed using a scanning electron microscope. Results: The difference in surface microhardness before and after 10 minutes of immersion in the experimental drink was the highest in the Ca 0% group, followed by the Ca 0.1%, 0.5%, 1%, 2% group and the mineral water group, in that order. The groups with a calcium concentration of more than 0.5% showed statistically significant differences in surface microhardness compared to the Ca 0% group. In addition, when the surface morphology of enamel was observed under a scanning electron microscope, the results showed that the highest level of surface damage was observed in the Ca 0% group, followed by the Ca 0.1%, 0.5%, 1%, 2% group, in that order. Conclusions:The present study confirms that a higher calcium concentration in fermented milk is associated with a higher possibility of preventing dental erosion. The addition of 0.5% calcium, which is a relatively low concentration, did not completely prevent dental erosion, but significantly inhibited dental erosion compared to fermented milk without any added calcium. Therefore, it is suggested that consumers should be educated and provided with guidance to consider the calcium content when choosing fermented milk.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.7-15
• /
• 2019

PURPOSE. The aim of this study was to identify the effects of three aesthetic restorative materials on the wear between tooth and restoration by a pin-on-disk manner. MATERIALS AND METHODS. Six aesthetic restorative materials were used to prepare disk specimens for wear test, which were Lava Zirconia as zirconia group, Vintage MP and Cerabien ZR as veneering porcelain group, Gradia Direct microhybrid composite containing prepolymerized fillers, Filtek Z250 microhybrid composite containing zirconia glass and colloidal silica particles, and Filtek Z350 nanocomposite as composite resin group. Vertical loss of the worn cusp, change of the surface roughness of the restoration materials, and the surface topography were investigated after wear test under 9.8-N contact load. RESULTS. The porcelain groups (Vintage MP and Cerabien ZR) caused the largest vertical loss of teeth when compared with those of the composite resin and zirconia groups, and Filtek Z250 microhybrid composite results in the second-largest vertical loss of teeth. The surface of Filtek Z350 nanocomposite was deeply worn out, but visible wear on the surface of the zirconia and Gradia Direct microhybrid composite was not observed. When the zirconia surface was roughened by sand-blasting, vertical loss of teeth considerably increased when compared with that in the case of fine polished zirconia. CONCLUSION. It was identified that microhybrid composite resin containing a prepolymerized filler and zirconia with reduced surface roughness by polishing were the most desirable restorative materials among the tested materials to prevent the two-body wear between aesthetic restorative material and tooth.

• 대한치과교정학회지
• /
• 제27권2호
• /
• pp.315-326
• /
• 1997

여러 세라믹 브라켓과 접착제에 따른 전단 결합 강도를 비교하기 위하여, 영구 소구치 48개를 대상으로 베이스의 유지 형태가 다른 3종의 세라믹 브라켓을 광중합과 화학 중합을 포함한 3종의 교정용 접착제를 사용하여 접착하고 전단 결합 강도와 파절 양상을 관찰한 결과, 화학 중합형 레진으로 접착한 경우 광중합형으로 접착한 경우보다 결합강도가 높았으며, 화학적 결합을 하는 Starfire 브라켓이, 기계적 결합을 하는 Transcend나, 복합형 결합인 Fascination 보다 전단 결합 강도가 낮았다. Trascend는 주로 법랑질과 레진(E/R)에서, Fascination은 법랑질, 레진, 브라켓 베이스에 혼합(COMB)되어 파절되며, Starfire는 레진과 브라켓 베이스(R/B)에서 파절이 나타났다.

• 치과방사선
• /
• 제17권1호
• /
• pp.271-278
• /
• 1987

The purpose of the present study was to investigate associations between periapical and bitewing techniques by assessing the crestal alveolar bone. This article also reports the ability of these two techniques to correctly detect evidence of interproximal dental caries, and comparison between the interproximal overlapping of teeth. Bitewing and periapical radiographs were used from posterior quardants of 243 dental students in Seoul National University. The distance from cemento-enamel junction to the alveolar crest (CEJ-AC) was measured for each proximal surface from the distal of cuspid to the distal of second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired tests. The obtained results were as follows: 1. In maxilla, a significant t ratio with a P value of 0.05 or less reached for 100% and in mandible, reached for 94%. 2. The anatomic limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentuated by the anatomical restrictions of the hard palate. 3. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used. 4. The number of the interproximal overlapping was the largest medial side of the maxillary second molar, while the smallest at the distal side of the mandibular second premolar. And the overall number of the interproximal overlapping was more (538) in the periapical technique than in the bitewing technique (372). 5. The interproximal dental carious lesions were detected more (74) on the bitewing films than on the periapical ones (23). The fact was resulted from the small number of interproximal overlapping and relative easi- ness of obtaining horizontal angulation in taking the bitewing radiographs.

• 한국치위생학회지
• /
• 제12권1호
• /
• pp.113-122
• /
• 2012

Objectives : This study was carried out to investigate the caries resistant effect of fluoride by dental polishing prior to fluoride application in vitro. Methods : Artificial caries lesion was made on the surface of specimen enamel taken from cow's permanent cuspid on the part of labial surface after resin embedding and polishing. Artificial dental plaque was formed on the 72 dental specimen 25~45 VHN(Vickers Hardness Number) which were divided into three groups(fluoride varnish, APF gel, control) with dental polishing and without polishing respectively. Fluoride varnish and APF gel group with 20 second polishing or without polishing were immersed in the artificial saliva respectively. Control group with or without polishing were immersed in the artificial saliva. Results : 1. Significant difference was not found by fluoride varnish between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of Vickers Hardness Number(VHN) were $14.49{\pm}13.73$. 2) non-polishing group. The changes of VHN were $11.67{\pm}5.39$. 2. Significant difference was not found by APF gel between polishing group and non polishing group (p>0.01). 1) polishing group. The changes of VHN were $8.48{\pm}8.37$. 2) non-polishing group. The changes of VHN were $5.32{\pm}2.59$. Conclusions : Showed no significant difference between polishing group and non-polishing group regardless of fluoride materials (fluoride varnish, APF gel).