• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.289-292
• /
• 2010

In this paper we proposed web-based educational multimedia contents development method using Web 3D technology and implemented web 3D contents for use at the education field. A implementation of contents is composed of modeling to specific entity in 3D shape, convert modeling data to enable data at web and include in webpage. A practical use of contents on this research can provide more advanced user experience and immersion.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.377-381
• /
• 1999

This paper presents a implementation of digital motion control system for induction motor vector drives using the 16bit DSP TMS320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are speed and current sensing, sine look-up table and generated SVPWM by fully integrated control software. The developed system in a implementation are shown a good speed response characteristic results and high performance features. The system can be adapted variform motor drive system.

• Proceedings of the KIPE Conference
• /
• 1998.11a
• /
• pp.55-59
• /
• 1998

By this time, Diode Rectifier or SCR has been used to gain DC Voltage for Electrolysis Power. Generally DC Voltage is produced from rectifier shall be transformed before rectifier using step-down transformer to obtain adaptable DC Voltage, rectifier output. In the same way, rectifier using SCR shall obtain output voltage after step-down voltage through transformer and control of the SCR firing angle. Transformer shall be used for this two methods to adjust the voltage. But the size and weight of the transformer are increased in accordance with the increase of capacity, and the hardships are accompanied in workspace or transportation. Besides, only the value of input voltage is possible to be regulated, and the expectation of current control is almost impossible during Electrolysis. This study has conducted Design and Simulation to reduce the size and weight of transformer and to be enable voltage and current control of Electrolysis power through high-speed switching using Inverter, Electronics device.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.14-17
• /
• 1999

This paper describes the controller for the improving speed control the AC servo motor. The microprocessor provides an output to the difference in command. The servo system improves the characteristics of speed control. When the motor is running at the same speed as set by the reference signal, the speed encoder also provides a signal the same frequency. Thus, the microprocessor controlled digital techniques enable to realize the flexible performance and control which was possible with time constant. We can know that PI control using neural networks by 80196 can control efficiently speed of AC Servo motor. Finally experimental results prove excellent performance of this control system. The system can be adaptable to CNC machine.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.245-250
• /
• 2010

Input-series-output-parallel (ISOP) converters consisting of multiple modular DC/DC converters can enable low voltage rating switches to be used under high voltage input applications. This paper presents a digital control strategy, which can achieve equal sharing of input voltage for a modular ISOP system consisting of two-transistor forward DC/DC converters by forcing the input voltages of neighboring modules to be equal. The proposed scheme is analyzed using small signals analysis based on the state space average method. The performance of the proposed control strategy is verified with an experimental prototype of an ISOP converter made up of three two-switch forward converters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.931-938
• /
• 2006

Using high resolution stereoscopic imaging system three digital elevation model of tunnel face is acquired. The images oriented within a given tunnel coordinate system are brought into a stereoscopic vision system enabling three dimensional inspection and evaluation. The possibilities for the prediction ahead and outside of tunnel face have been improved by the digital vision system with 3D model. Interpolated image structures of rock mass between subsequent stereo images will enable to model the rock mass surrounding the opening within a short time at site. The models shall be used as input to numerical simulations on site, comparison of expected and encountered geological conditions, and for the interpretation of geotechnical monitoring results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1692-1696
• /
• 2006

Dopant and host molecules for charge transport layer in OLED have been developed. They enable implementation of the PIN OLED technology in mass production. We review the status of PIN OLED with main focus on top-emission structures and operation stability at elevated temperatures. A green phosphorescent top-emission device with 2.5 V operating voltage and 90 lm/W at 1000 $cd/m^2$ is presented. For a red top-emission device, lifetime exceeding 100,000 h at 500 $cd/m^2$ initial brightness is reported. Operational stability at $80^{\circ}C$ has been investigated. A lifetime of 17,000 h at 500 $cd/m^2$ has been achieved. Finally, we comment on further reduction of the operating voltage in OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1539-1543
• /
• 2006

We have developed self-aligned imprint lithography (SAIL) technology, an innovative method for roll-to-roll (R2R) fabrication of electronic devices on flexible plastic substrates. In this paper, we present the first R2R-produced ${\alpha}$-Si TFTs built on a polyimide substrate using the SAIL process, and prove the feasibility of this technology to enable R2R fabrication of flexible display active matrix (AM) backplanes with high precision and throughput.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1123-1126
• /
• 2005

For creation of low temperature polycrystallinesilicon (LTPS) the line beam excimer laser annealing (ELA) is a well known and established technique in mass production. With introduction of Sequential Lateral Solidification (SLS) some aspects such as crystalline quality, throughput and flexibility regarding the substrate size could be improved, but for OLED manufacturing still further process development is necessary. This paper discusses line beam ELA and SLS techniques that might enable process engineers to make polycrystalline-silicon (poly-Si) films with a high degree of uniformity and quality as required for system on glass (SOG) and active matrix organic light emitting displays (AMOLED). Equipment requirements are discussed and compared to previous standards. SEM images of process examples are shown in order to demonstrate the viability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1332-1344
• /
• 1996

This paper presents a pipelined floating point multiplier(FMUL) for superscalar microprocessors that conbines radix-16 recoding scheme based on signed-digit(SD) number system and new rouding and normalization scheme. The new rounding and normalization scheme enable the FMUL to compute sticky bit in parallel with multiple operation and elminate timing delay due to post-normalization. By expoliting SD radix-16 recoding scheme, we can achieves further reduction of silicon area and computation time. The FMUL can execute signle-precision or double-precision floating-point multiply operation through three-stage pipelined datapath and support IEEE standard 754. The algorithm andstructure of the designed multiplier have been successfully verified through Verilog HOL modeling and simulation.