• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.604-609
• /
• 2009

The antioxidative activities of the water solution of crude extract from edible mushroom enokitake Flammulina velutipes were compared with those of ascorbic acid and ascorbic acid 6-palmitate in oil-in-water (O/W) emulsions of cod liver oil. Oxidation of the emulsions was carried out at 40 and $50^{\circ}C$ in the dark. The antioxidant activities were measured by in vitro assay against oxygen uptake, 2-thiobarbituric acid value, hydroperoxide formation of the oils. Also, residual docosahexaenoic acid content was measured as indices of lipid oxidation. The cod liver oil in O/W emulsions with added enokitake crude extract (ECE) was significantly more stable against lipid oxidation than the control emulsions without the extract in terms of any oxidation indices used. Moreover, ECE provided remarkable antioxidative properties to eicosapentaenoic acid ethyl ester in emulsion system. These observations demonstrate that F. velutipes can be used as a natural antioxidant, which effectively prevents oxidation of polyunsaturated oils in emulsion system.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.733-737
• /
• 2012

본 연구는 미세유체의 수력학적 조절을 통한 단분산성 다중 액적 형성방법을 기술한다. 다중 액적을 형성하기 위해 별도의 표면 개질이 필요 없는 co-flowing stream 시스템과 유리 모세관을 이용하여 미세유체 칩을 제작하였다. 유리모세관 미세유체 칩 내부로 0.5 wt% Tween 20이 함유된 증류수, n-hexadecane (5 wt% Span 80), 그리고 10 wt% poly(vinyl alcohol) (PVA) 수용액을 흘려줌으로써 단분산성 다중 액적(W/O/W)을 성공적으로 형성하였다. 더불어, 내부 액적의 개수를 제어하기 위해 수력학적 변수로 작용하는 중간 유체와 최외각 유체의 부피유속을 고정시키고 내부 유체의 부피유속을 조절하는 방법을 사용하여 다양한 내부 액적을 지니는 다중 유화 액적을 성공적으로 완성하였다. 이와 같은 미세유체 시스템을 통해 형성된 다중 액적은 내부물질의 종류에 따라 다양한 화학반응을 위한 하나의 독립된 마이크로 반응기로 사용될 수 있을 것으로 기대한다.

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.866-877
• /
• 2018

Cheese emulsion is an intermediate product for the production of cheese powder and needs to be stable, homogeneous and pumpable characteristics to convey to the spray drier. This study was conducted to evaluate the effects of fat reduction and emulsifying salt (ES) amount in cheese emulsion systems on the physicochemical characteristics. Reduced-fat (RF) and full-fat (FF) white-brined cheese emulsions were produced with different dry matters (DM; 15%-25% excluding ES) and ES concentrations (0%-3% based on cheese weight). Stable cheese emulsion was obtained at lower DM in RF cheese emulsion than that of FF cheese emulsion. Reduction in the amount of ES resulted in instability of both emulsions. Apparent viscosity with pseudoplastic flow behavior significantly increased with the decrease of fat content in stable cheese emulsions. Microstructure of emulsions appeared to be related to the fat content, stability and degree of emulsification. Reduction of fat content caused to get less lightness and more greenness in color, whereas yellowness was significantly decreased by increase in the amount of ES. In conclusion, fat reduction resulted in higher viscosities of cheese emulsion due to inducing the increment of protein, and the addition amount of ES considered as very important factor to produce stable cheese emulsion without protein precipitation or cream separation. Therefore, for preparation of RF cheese emulsion using a variety of white-brined cheese, lower amounts of DM would be suggested in this study to obtain homogenous droplets in the atomizing process of spray drying.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.89-98
• /
• 2015

PURPOSES : The objective of this study is to evaluate the performance properties of chip seals and fog seals with polymer-modified emulsions. METHODS : The performance of chip seals and fog seals was evaluated on the basis of common issues in surface treatments. Granite aggregate and four types of asphalt emulsions (one of the unmodified and three of the modified emulsions) were used considering the usage in field. A Vialit test was performed to determine the aggregate retention, and the MMLS3 (Third Scale Model Mobile Load Simulator) test was conducted to determine the aggregate retention, bleeding, and rutting. In addition, the fog seal specimens were tested by the BPT (British Pendulum Test) to evaluate skid resistance. RESULTS AND CONCLUSIONS : Overall, the polymer-modified emulsions (PMEs) showed better aggregate retention and bleeding resistance for both chip seals and fog seals. When comparing the performance of the PMEs, the difference was not considerable. In addition, PMEs present significantly better rutting resistance than unmodified emulsions. For skid resistance, if the recommended mix design is applied, the specimens do not cause issues with skid resistance. Although all of the fog seal specimens were over the criteria for skid resistance, the specimen fabricated by the high emulsion application rate (EAR) of the unmodified emulsion was nearly equivalent to the skid value criteria. Therefore, the use of an unmodified emulsion with a high EAR should be carefully applied in the field.

• 대한화학회지
• /
• 제12권1호
• /
• pp.4-11
• /
• 1968

With the selected emulsifiers for the emulsion polymerization of methyl methacrylate, the HLB of the emulsifier in the reaction system has been studied on the effect of the ratio of tetra sodium-N-(1,2-dicarboxy ethyl)-N-octadecyl sulfosuccinamate(Aerosol 22) to polyethylene glycol nonyl phenyl ether (Noigen EA 160), and also sodium lauryl sulfate(Quolac EX-UB), Disodium-N-octadecyl sulfosuccinamate (Aerosol 18) and Aerosol 22 as emulsifiers having various hydrophilic groups in the molecules have been studied. Results are as follows; 1) The viscosity of the emulsions and the molecular weight of the polymers have maximum values at a constant HLB value of emulsifiers, but their stabilities show minimum point at the value with the titration with the three kinds of mono, bi, tri-valent electrolytes. These results are agreed on the theory of Greth & Wilson in which the properties of polymer emulsions depend upon the HLB system of emulsifiers. 2) The viscosity of the emulsions and the molecular weights of the produced polymers increase more in the case of blending of Aerosol 22 to Noigen EA-160 than of the separate using. 3) The coagulation effects of the divalent electrolytes($ex,\;Ca^{++},\;Zn^{++}$) are contrast to the effects of monovalent($ex,\;Na^+$) and trivalent($ex,\;Al^{+++}$) in the emulsions with Aerosol 18 or Aerosol 22 which have more than two hydrophilic groups. It seems that the stability of the O/W emulsions by electrolytes is directly related to the parameters of surface physical chemistry such as surface geometry of surface chemical constitution of polymer particles.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.623-627
• /
• 2014

에멀젼은 섞이지 않은 두 물질을 분산시스템으로 혼합시켜 놓은 것이다. 에멀젼의 점도에 영향을 미치는 인자는 유화입자 크기, 연속상 및 분산상 종류, 연속상과 분산상의 비, 유화제 종류 및 유화기기 등 다양한 요소들이 있다. 본 연구에서는 오일 극성도에 따라 에멀젼의 점도 변화를 관찰하였고 이를 유기개념도를 이용하여 해석하였다. 탄화수소계, 에스테르계 및 실리콘계 오일을 사용하여 에멀젼을 제조하여 점도를 측정하였다. 오일 극성도가 높을수록 계면에 위치하는 유화제 및 유화안정제의 양이 적어지기 때문에 점도는 감소하였다. 극성 오일간 극성도를 수치적으로 비교하기 위해 유기개념도 이용하였으며 유기개념도상의 해석과 에멀젼의 점도 측정 결과가 실리콘 오일을 제외하고는 모두 일치하였다.

• 대한화장품학회지
• /
• 제40권3호
• /
• pp.237-246
• /
• 2014

다중 에멀젼은 다층 구조를 갖는 에멀젼으로 W/O/W형과 O/W/O형으로 구분된다. 화장품 분야에서 다중 에멀젼은 불안정한 유효성분의 안정화를 위해 이용되지만, 제조의 어려움과 안정성 등의 문제로 잘 이용되지 않는다. 본 연구에서는 다중 에멀젼의 제조에 있어 2 단계(two-step) 유화법을 이용하여 W/O/W형 다중 에멀젼을 제조하였고, 다중 에멀젼의 형성에 영향을 주는 요소 중 유화제의 계열에 초점을 두어 유화 안정성 및 에멀젼 형성정도를 측정하였다. 결과를 통해 다중 에멀젼은 오일의 특성에 따라 polyglyceryl-10 stearate 유화제에 의해 다중 에멀젼의 형성이 달라지는 것을 확인하였고, 이를 통해 주 유화제로써 polyglyceryl-10 stearate 유화제의 적용이 다중 에멀젼 형성 및 안정화의 가능성이 있음을 제시하였다.

• Journal of Animal Science and Technology
• /
• 제63권2호
• /
• pp.417-425
• /
• 2021

The use of edible insects to replace meat protein is important to ensure future global food security. However, processed foods using edible insects require development to enhance consumer perception. Here, we examined the physicochemical characteristics and rheological properties of emulsions prepared from different edible insect larvae. Three edible insect species (Tenebrio molitor, Allomyrina dichotoma and Protaetia brevitarsis seulensis) were used to prepare larval emulsions that were formulated with 65% of insect larvae, 20% of pork back fat, and 15% ice. The A. dichotoma emulsion had the highest pH and lightness, redness, and yellowness values, while the T. molitor emulsion had the lowest pH and lightness, redness, and yellowness values. The T. molitor emulsion had the highest hardness, gumminess, chewiness, and apparent viscosity values but the lowest springiness and cohesiveness values. According to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis, T. molitor had the thickest bands, followed by P. brevitarsis seulensis. The differential scanning calorimetry distributions for the T. molitor and A. dichotoma emulsions showed one peak, while that of the P. brevitarsis seulensis emulsion had two peaks. The collective results suggest that T. molitor was the most suitable candidate (of the three tested species) for use as a meat replacement in terms of its physicochemical and rheological properties. It is important that such properties of insect-based emulsions are maintained using various technologies.

• 대한본초학회지
• /
• 제25권4호
• /
• pp.145-149
• /
• 2010

Objectives : Since cosmetics have been one of the help of life, unlike medicine, natural products have been used for cosmetics, generally giving the image of safety and relief compared to synthetic products. Among them, Houttuynia cordata has been known as a useful herbal medicine with antibiotic, anti-inflammatory and anti-oxidative activities. In this study, we were to use Houttuynia cordata extract on formulation of cosmetic emulsions. Methods : The effects of Houttuynia cordata extract on emulsion stability and viscoelastic properties of emulsion were measured using turbiscan and rheometer. And we assessed the anti-oxidative and antibiotic activities of Houttuynia cordata extract. Results : 1. The results of this investigation for emulsion stability showed that the stability emulsion containing Houttuynia cordata extract was decreased depending on concentration of Houttuynia cordata extract. 2. Super oxide dismutase activity was strongly dependents on concentration of Houttuynia cordata extract. 3. Houttuynia cordata extract showed good anti-microbial activity against Staphylococcus aureus. Conclusions : Houttuynia cordata extract can be effectively used in cosmetic emulsions when the relation between natural product extracts and formulation of cosmetics is elucidated.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.