• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.48-55
• /
• 2015

The number of collapse accidents relevant to form support since 2003 is 30 on the basis of statistical data from Ministry of Employment and Labor,. Total number of casualty was 138 (47 for deaths and 91 for injuries). The accident severity rate was high because the 4.6 casualties per one accident were occurred averagely although the incident rate was relatively low. Especially, one of form support members, the pipe supports have not been equipped adequately so that the accidents could have happened. In this regard, this study performed buckling test related to the effect of horizontal connection and slope in the single pipe which is one of typical pipe supports. The buckling load, which was estimated from the single pipe with the horizontal connectors theoretically and experimentally, was increased as more than 2 times compared to the buckling load obtained from the pipe supports without the connector. The buckling load was reduced as more than 26%, 34% slope of the single pipe comparing with 5% and 10% slope, respectively. Thus, the purpose of this study is to provide the guideline for installation and the maintenance of the pipe supports legally and institutionally to prevent the collapse accidents of the pipe supports.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.2
• /
• pp.245-256
• /
• 2002

Measurement standards, as being widely recognized, is necessary for national economic development and advanced industrialization. Also measurement standards give reliability and fair trade to the producers and consumers. Macro-effect of measurement standards using estimation of cost function has four effects: 1) value-added causing effect, 2) effect of employment, 3) reduction effect transaction cost, 4) reduction effect defect rates. In this study, to investigate the impacts between specific and the other industries, we used I-O Table of Korea Bank. The relation between the value-added produced by original production factors and final use is determined through production level, and the relation can be investigated with production causing coefficient matrix. In this study, it was showed that the measurement standards investments including measurement only man power of industries were increased from 1995 rapidly. The establishment and maintenance of measurement standards contributes to reduce the defect rate of products in production process and improve the confidence of the product quality. The results from this study show that measurement technology contributes to improve quality, decrease defect rate, improve production process, develope new products, reduce prime cost and increase the consumer's confidence on the firms. Since these results indicate that measurement standards are very important in the point of their vast contribution, we hope our findings can contribute to encourage measurement activities in industries.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.6
• /
• pp.1389-1407
• /
• 2013

The purpose of this study was to inquiry of perception on the characteristics of applying students for vocational education division in the CSAT(College Scholastic Ability Test) and what were characteristics of main group by industry department teachers of specialized vocational high school. Therefore, it was highly desirable that researchers to survey what were change on the characteristics of applying for vocational education division in the CSAT and what were prospect on applying group for vocational education division in the CSAT. The survey included 100 industry department teachers of specialized vocational high school on 9 regions from Korea. The analysis of survey results were by regions, industry department teacher's career of specialized vocational high school. The results were as follows. Main reasons of reducing on applying for vocational education division in the CSAT after the class of 2010 was policy of employment reinforce in specialized vocational high school by government. The next reason was increasing students who want the next stage of education not requiring results of the CSAT. Leading group of reducing on applying for the CSAT after the class of 2010 was fine grade group. Prospect on number of applying students for vocational education division in the CSAT was maintenance on the minimum number of applying students for the CSAT, after lasting of reducing state.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.209-214
• /
• 2009

The employment of the induction generator is preferable in the natural energy utilization by the minimum maintenance and the mechanical robustness, Another merit is also expected when it is connected to the power network system, because constant-voltage and constant frequency (CVCF) power generation is easily realized in spite of the variation of the rotor speed. However the induction generator needs much amount of the reactive power that reduces power factor in the primary side. The improvement of power factor in the primary side requires large VAR compensator, this point is solved, the merit of the induction machine as a main generator will become more established. This paper proposes a novel approach where the secondary is controlled by a PWM inverter not only to get CVCF power but also to improve the primary power factor. Basically the inverter is controlled so that the field current is supplied from the secondary side in this approach. The required capacity of the inverter is small, because only the slip power is controlled in the secondary side. In the experimental system where the sea wave torque simulator is used, the power factor is well improved by the microcomputer controlled PWM inverter.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.45-54
• /
• 2014

The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

• Smart Structures and Systems
• /
• v.1 no.4
• /
• pp.355-368
• /
• 2005

Large and complex structures are being built now-a-days and, they are required to be functional even under extreme loading and environmental conditions. In order to meet the safety and maintenance demands, there is a need to build sensors integrated structural system, which can sense and provide necessary information about the structural response to complex loading and environment. Sophisticated tools have been developed for the design and construction of civil engineering structures. However, very little has been accomplished in the area of monitoring and rehabilitation. The employment of appropriate sensor is therefore crucial, and efforts must be directed towards non-destructive testing techniques that remain functional throughout the life of the structure. Fiber optic sensors are emerging as a superior non-destructive tool for evaluating the health of civil engineering structures. Flexibility, small in size and corrosion resistance of optical fibers allow them to be directly embedded in concrete structures. The inherent advantages of fiber optic sensors over conventional sensors include high resolution, ability to work in difficult environment, immunity from electromagnetic interference, large band width of signal, low noise and high sensitivity. This paper brings out the potential and current status of technology of fiber optic sensors for civil engineering applications. The importance of employing fiber optic sensors for health monitoring of civil engineering structures has been highlighted. Details of laboratory studies carried out on fiber optic strain sensors to assess their suitability for civil engineering applications are also covered.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.1
• /
• pp.9-19
• /
• 2012

Objectives: The aim of this study is to critically review the exposure surrogates and estimates used to associate health effects in wafer fabrication workers such as spontaneous abortion and cancer, as well as to identify the limitations of retrospective exposure assessment methods Methods: Epidemiologic and exposure-assessment studies of wafer fabrication operations in the semiconductor industry were collected. Retrospective exposure-assessment methods used in cancer risk and mortality and reproductive toxicity were reviewed. Results: Eight epidemiologic papers and two reports compared cancer risk among workers in wafer fabrication facilities in the semiconductor industry with the risk of the general population. Exposure surrogates used in those cancer studies were fabrication(vs. non-fabrication), employment duration, manufacturing eras, job title (operator vs. maintenance worker) and qualitative classifications of agents without assessing specific agent or job-specific exposure. In contrast, specific operation, job title and agents were used to classify the exposure of fabrication workers, contributing to finding a significant association with spontaneous abortion (SAB). Conclusion: Further epidemiologic studies of fabrication workers using more refined exposure assessment methods are warranted in order to examine the associations between fabrication work, environment, and specific agents with cancer risk or mortality as used in SAB epidemiologic studies.

• Journal of Agricultural Extension & Community Development
• /
• v.29 no.4
• /
• pp.203-224
• /
• 2022

This study aims to examine the educational needs of migrant farm workers and farmers in Korea. For developing survey instruments, content analysis of migrant workers & employer training programs, in-depth interviews with farmers and expert reviews had been conducted. Therefore, eight parts and twenty nine educational contents for migrant workers, five parts and twenty educational contents for farmers have been constructed. For data analysis, Borich analysis and The Locus for Focus Model were hired to analyze the educational needs assessment. Results showed that migrant workers' educational priorities were 'basic korean for farming, working attitude in farming, safety guidelines and first aid skills for rural life, safe use of pesticides and protective equipment, driving skills, safe use of agricultural machinery, operation & maintenance of agricultural machinery, pest control by crop', and for the farmers' were 'communication with migrant workers, trouble controls with employment, farming guidance, industrial accident cases and countermeasures, preventing disease and promoting mental health of migrant workers'.

• Land and Housing Review
• /
• v.9 no.2
• /
• pp.9-19
• /
• 2018

The purpose of the study is to show the possibility of the enlargement of land banking types through employment of the French land bank case. For sustainable urban regeneration projects, it is necessary to improve the land banking system with comprehensive land banking types. There are a total of 35 land banking agencies in France, which are made according to the needs of the municipality. The main function of these institutions is to perform functions such as land acquisition, management, division, land maintenance(decontamination, etc.), land use plan review and so on. In the 1960s and 1970s, mainly purchase and maintenance of land mainly focused on Brownfield and idle land, but since 2000 the land purchase business is mainly for the supply of social rental housing which is missing It was. The use of land banks is most frequently mentioned as a way of how to supply land at a low price in urban renewal projects. To that end, it is necessary to revise related laws, even if the law is revised so that land for urban regeneration projects can be secured, due to the limit of financial resources, land for the urban regeneration project nationwide secured It will not be easy without policy judgment of a positive nation. Therefore, securing land reserve resources for urban regeneration projects utilizing residential district funds and municipal maintenance funds is essential. In addition, even on a small scale, it is necessary to consider the banking of land for regional capitalization at the local government level.

• Industry Promotion Research
• /
• v.5 no.1
• /
• pp.89-98
• /
• 2020

This study is to find ways to build economic participation for the elderly through job projects to help the elderly live a pleasant life. The results of this study are as follows. First, the relevant laws must be overhauled. To this end, jobs targeting the elderly should be selected first, and legal procedures should be prepared in the government. Second, they should extend the retirement age and support senior employment businesses. The extension of the retirement age believes that a resumption of the wage structure is inevitable in order to increase employment for senior citizens. It is also desirable to implement policies such as giving tax benefits to companies that employ older people more than a certain percentage of them. Third, there should be self-help efforts by the elderly. Three factors are essential to keep the work of old age pleasant and faithful. In other words, it is important to always learn new knowledge and hone one's ability in order to do a rewarding job of living without health and some economic stability. In conclusion, measures to establish economic participation for the elderly through the work-seeker project will require, among other things, a sufficient extension of the retirement age to allow the elderly to engage in their jobs, while overhauling the system, including legal maintenance.