• Title/Summary/Keyword: Emergency water

Search Result 442, Processing Time 0.027 seconds

Determination of Self-Disposal date by the Analysis of Radioactive Waste Contamination for 1131I Therapy Ward (131I 치료입원실 폐기물 방사능 오염도 분석 및 자체처분가능일자 산출)

  • Kim, Gi-sub;Jung, Haijo;Park, Min-seok;Jeon, Gjin-seong
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.17 no.1
    • /
    • pp.3-6
    • /
    • 2013
  • Purpose: The treatment of thyroid cancer patients was continuously increased. According to the increment of thyroid cancer patients, the establishment of iodine therapy site was also increased in each hospital. This treatment involves the administration of radioactive iodine, which will be given in the form of a capsule. Therefore, protections and managements for radioactive source pollution and radiation exposure should be necessary for radiation safety. Among the many problems, the problem of disposing the radioactive wastes was occurred. In this study, The date for self-disposal for radioactive wastes, which were contaminated in clothes, bedclothes and trash, were calculated. Materials and Methods: The number of iodine therapy ward was 15 in Korea Institute of Radiological Medical and Sciences. Recently, 8 therapy wards were operated for iodine therapy patients and others were on standby for emergency treatment ward of any radiation accidents. Radioactive wastes, which were occurred in therapy ward, were clothes, bedclothes, bath cover for patients washing water and food and drink which was leftover by patients. Each sample was hold into the marinelli beaker (clothes, bedclothes, bath covers) and 90 ml beaker (food, drink, and washing water). The activities of collected samples were measured by HpGe MCA device (Multi Channel Analysis, CANBERRA, USA) Results: The storage period for the each kind of radioactive wastes was calculated by equation of storage periods based on the measurement outcomes. The average storage period was 60 days for the case of clothes, and the maximum storage period was 93 days for patient bottoms. The average storage period and the maximum storage period for the trash were 69 days and 97 days, respectively. The leftover foods and drinks had short storage period (the average storage period was 25 days and maximum storage period was 39 days), compared with other wastes. Conclusion: The proper storage period for disposing the radioactive waste (clothes, bedclothes and bath cover) was 100 days by the regulation on self-disposal of radioactive waste. In addition, the storage period for disposing the liquid radioactive waste was 120 days. The current regulation for radioactive waste self-disposing was not suitable for the circumstances of each radioactive therapy facility. Therefore, it was necessary to reduce the leftover food and drinks by adequate table setting for patients, and improve the process and regulation for disposing the short-half life radioactive wastes.

  • PDF

GIS-based Urban Flood Inundation Analysis Model Considering Building Effect (건물영향을 고려한 GIS기반 도시침수해석 모형)

  • Lee, Chang-Hee;Han, Kun-Yeun
    • Journal of Korea Water Resources Association
    • /
    • v.40 no.3
    • /
    • pp.223-236
    • /
    • 2007
  • Recently in urban area flood damages increase due to local concentrated heavy rainfall. Even in the cities where stormwater drainage systems are relatively well established flood damage still occurs because of the capacity limitations of the existing stormwater drainage systems. When the flood exceeds the capacity limitation of the urban storm sewer system, it yields huge property losses of public facilities involving roadway inundation to paralyze industrial and transportation system of the city. To prevent such flood damages in urban area, it is necessary to develop adequate inundation analysis model which can consider complicated geometry of urban area and artificial drainage system simultaneously. The Dual-Drainage model used in this study is the urban inundation analysis model which combines SWMM with DEM based 2-dimensional surface flood inundation model. In this study, the dual drainage model has been modified to consider the effect of complex buildings in urban area. Through the simulation of time variable inundation process, it is possible to identify inundation alert locations as well as to establish emergency action plan for the residencial area vulnerable to flood inundation.

Analysis of Nitrosamines Concentration in Condom by using LC-MS/MS (LC-MS/MS를 이용한 콘돔에 함유된 니트로사민류 농도 분석)

  • Park, Na-Youn;Kim, Sungmin;Jung, Woong;Kho, Younglim
    • Journal of the Korean Chemical Society
    • /
    • v.62 no.3
    • /
    • pp.181-186
    • /
    • 2018
  • Nitrosamines are the nitrosocompounds which are produced by nitrosation reactions of the secondary amine and nitrite, and has been found to be produced through the vulcanization process during the production of rubber products Recently, nitrosamines have been detected in rubber products and become a major topic. Condoms are disposable medical devices, so safety is important because they come into direct contact with the skin and mucous membranes. In this study, we developed an analytical method for nitrosamines in condoms by applying ISO 29941 method. The samples were eluted by distilled water, and target compounds were extracted by liquid-liquid extraction with dichloromethane. And then after concentrated, and quantitatively analyzed by LC-MS/MS. The accuracies of the analytical method were ranged from 85.8 to 108.7%, precisions were lower than 11.5%, and the detection limits were from 0.11 (NDPA and NDBA) to 0.48 (NPYR) ng/mL. Among the 31 condom samples, NDBA was detected from 2 cases by extraction of distilled water, and NDMA were detected from 1 case, NDEA from 4 cases and NDBA from 26 cases by extraction of artificial saliva (pH 4.5). The total amount of nitrosamines in all samples were less than $500{\mu}g/kg$.

Series Dam Failure Simulation in Lawn Lake Dam Watershed (Lawn Lake Dam 유역의 연속댐 붕괴 모의)

  • Park, Se-Jin;Choi, Hyun-Gu;Kim, Pan-Gu;Han, Kun-Yeun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.607-607
    • /
    • 2012
  • 국내에서는 최근 지구온난화에 따른 전 지구적 이상홍수의 발생으로 댐 붕괴 우려가 증대되고 있고, 이에 따른 주민들의 불안감도 고조되고 있는 상황이다. 특히 최근 집중호우의 증가와 태풍의 영향으로 대규모 수공 구조물의 설계빈도를 초월하는 폭우를 동반하고 있다. 실례로 20세기 들어 전 세계적으로 약 200건 이상의 댐 붕괴 사고가 발생하여 댐 하류 지역에 막대한 인명 및 재산피해가 발생하였다. 국내의 경우 "연천댐", "장현, 동막저수지" 붕괴 등과 외국의 경우 이탈리아의 Vaiont 댐과 미국의 Teton 댐 등의 사례가 있다. 이처럼 댐은 설계홍수량 이하의 경우에는 비교적 안전하게 홍수를 예방할 수 있으나 이보다 큰 규모의 홍수가 발생할 경우 그 피해 또한 엄청나다. 따라서 댐 붕괴 등의 비상상황이 발생하였을 때 하류 지역의 생명과 재산 손실을 최소화하고 댐의 물리적, 지형적, 구조적 특성에 따른 비상상황을 예상하고 이에 효율적으로 대처하기 위해 비상대처계획(Emergency Action Plan, EAP)과 같은 대책을 수립하게 되었다. 이에 본 연구는 댐의 비상대처계획 수립시 중요한 사항 중 하나인 홍수류 해석을 실시하였다. 현재 국내에서 댐 붕괴 홍수류 해석은 주로 그 안전성과 정확성이 검증된 Fread(1984)의 1차원 모형인 DAMBRK 모형을 이용하여 댐 붕괴 홍수류 해석을 실시하고 있다. 이 DAMBRK 모형을 이용하여 실제 붕괴 사례인 1982년 미국 콜로라도에서 발생한 Lawn Lake 댐의 붕괴 홍수류 해석을 실시하였다. Lawn Lake 댐은 콜로라도 록키 마운틴 국립공원에 위치한 약 8m 높이의 필댐으로 댐 붕괴로 인하여 830,000 의 물이 유출되었으며, 3명이 사망하고 3,100만달러의 손해를 일으켰다. 다음과 같은 실제 붕괴 사례를 댐의 제원과 홍수량을 이용하여 DAMBRK 모의를 실시하였으며 모의한 결과와 실측치와의 비교를 해보았다. 본 연구에서 모의한 결과는 댐 최대 붕괴 유출량은 잘 나타내었지만, 지점별 최대 유량 및 홍수파 도달시간에 관련해서는 다소 차이를 보였다. 이는 조도계수의 변화에 따라 지점별 최대 유량과 홍수파 도달시간, 그리고 홍수위가 달라지는 것임을 확인하였고 실제로 Lawn Lake 댐이 붕괴되어 흘러들어가는 Roaring 강의 댐 붕괴 잔해나 하상 변화를 모르기 때문에 조도계수의 실측치는 모의값 보다 훨씬 클 것으로 예상된다. 본 연구를 통해 비상대처계획 수립시 홍수류 해석을 할 때 조도계수의 변화에 따라 모의 결과 및 범람범위가 달라질 수 있으니 조도계수의 채택에 있어 신중하고 정확한 판단이 필요할 것으로 판단된다.

  • PDF

Emergency Action Plan Index of Saemangeum Lake Using Flood Characteristics (홍수특성을 이용한 새만금호 비상대처계획 지표개발)

  • Kim, Dong Joo;Maeng, Seung Jin;Lee, Seung Wook;Kim, Hyung San
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.422-422
    • /
    • 2018
  • 우리나라의 간척사업은 고려시대 중엽부터 서남해안에 다수 산재되어 있는 천혜적인 간척 적지를 대상으로 지속적으로 추진되어 국토확장 및 식량 자급달성에 기여하여 왔다. 그러나, 최근 들어 쌀 수급 등 농업정책의 변화, 비용에 대한 경제성 평가의 변화, 개발과 보전에 관한 이해당사자간의 대립 등으로 신규 간척사업의 추진이 어려워지고 기존 간척지의 토지이용 목적 변화와 이치수 기능개선을 목적으로 배수갑문을 확장하는 등의 사업이 추진되고 있다. 본 연구에서는 방조제 상류지역 및 지천에서 이상홍수 유입에 따른 방조제 안정성 검토를 실시하였다. 호내로 유입되는 빈도별 홍수량에 따른 각 지점별 수위변화를 이용하여 방조제 비상대처계획에 대한 재난관리 지표로 활용할 수 있는지를 확인한다. 이를 위해 선정된 방조제를 중심으로 빈도별 홍수량을 산정하여 수문학적 안정성을 검토하고, 빈도별 홍수량에 따른 호내의 홍수위 변화를 통하여 비상대처계획 시나리오를 구성하고자 한다. 새만금 유역의 수치모델링에 필요한 범위를 설정하고, 모델 구성 및 자료를 입력한 후 검 보정을 통하여 모델의 신뢰성을 검증한 후 모델운영 조건을 설정하였다. 새만금 종합개발계획(MP)이 완료되었을 경우를 가정하여 통합운영을 실시하였다. 호내 관리수위에 따른 100, 200, 500, PMF 홍수량 유입시에 호내 홍수위 모의를 수행하였다. 또한, 비상단계 중 초기단계인 '관심단계'를 "이상홍수 발생부터 관리수위 EL-1.5m까지"로 설정한다면 방조제 초기 재난대응이 유리해 질 것으로 판단된다. 또한, '주의단계'는 "관리수위 EL-1.5m부터 호내 관리홍수위 EL+1.5m까지"로 '경계단계'를 "호내 관리홍수위 EL+1.5m부터 제당 내측사석보호공 홍수위까지", '심각단계'를 "제당 내측사석보호공(만경유역 EL+4.5m, 동진유역 EL+2.5m) 이상의 홍수위"로 설정한다면 방조제 관리자에게 세부화된 정보 및 지표를 제공해 줄 것이라 판단된다. 방조제 비상상황 단계별 분류에서 이상홍수위 발생후의 시간을 수치모의를 통해 구분하였으며 정성적인 위기상황 판단이 아닌 구체적인 수치로 된 지표들을 방조제 위기상황 재난지표로 활용한다면 상황 관리자의 위기상황 판단과 대처를 위한 의사결정에 도움이 될 것으로 기대한다.

  • PDF

A CFD Study of Oil Spill Velocity from Hole in the Hull of Oil Tanker (유조선 선체 파공에 따른 원유 유출 유속의 CFD 연구)

  • Choi, Dooyoung;Lee, Jungseop;Paik, Joongcheol
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.71-71
    • /
    • 2018
  • Sea pollution accidents have been occurred due to the increase of marine ship traffic. Oil spill from the hull hole induced by tanker collision results in the huge sea pollution. Proper and prompt reaction on such oil spill disaster is needed to minimize the damage. Thru-hull emergency wood plug is typically used to manually close small holes, while it is required to develop some mechanical devices for closing large holes in the hull due to huge fluid pressure. Accurate estimation of oil discharge and velocity from such holes are important to develop proper device to control hull hole damage. High resolution CFD modeling investigation on the configurations of hull hole of 7.5 m initial depth and 30 cm diameter, which was observed in the oil spill accident of the Hebei Sprit off the west coast of Korea in 2007, has been carried out to compute the oil spill velocity distribution in terms of flow depth. Friction loss due to the viscous flow and the discharge coefficient of crude oil with specific gravity SG = 0.85 and viscosity of $4-12cP(mPa{\cdot}s)$ at the temperature of $20^{\circ}C-100^{\circ}C$ are presented in terms of Reynolds number based on the results of high-resolution CFD modeling.

  • PDF

Clinical Analysis on the Closed Thoracostomy -2341 cases (폐쇄식 흉강 삽관술에 대한 임상적 고찰)

  • Kim, Cheon-Seog;Kim, Yeun-Gue;Park, Jin;Lee, Kyong-Woon
    • Journal of Chest Surgery
    • /
    • v.30 no.10
    • /
    • pp.991-1000
    • /
    • 1997
  • Closed thoracostomy with UWSD* which is the most utilized procedure in chest surgery applies general thoracic disorders, trauma and after-thoracic surgery. The University hospital was involved on operating 2341 cases of closed thoracostomy with UWSD except chest tubing after-thoracic surgery for a full six years from January, 1991 to December, 1996. The rate of men and women out of the total 2341 cases was 3.5 : 1, the distribution by age showed that men were 36.6 $\pm21.0$ years old, women were $47.0\pm20.2$ years old and so that the total were 40.0 $\pm$ 20.5 years old. As for indication, spontaneous, secondary and traumatic pneumothorax were the most common, in addition to hemothorax hemopneumothorax, hydrothorax, hydropneumothorax, empyema, chylothorax. The most indwelling period of chest tubing is between eight and fourteen days for 974 cases and the average is 13.7 $\pm$ 6.3 days, The average drainage amount immediately after thoracostomy was 537 $\pm$ 88m1, and in 694 cases(46.0%), the drain amount was 201 ~ 500 ml. The rate of right and left tubing was 52.4 47.6, in 2071 cases(88.5%), the thoracostomy was the first chance and 2210 cases(94.4%) were treated with a single tube drainage. Almost all the patients complained of tube site pain, besides tube site infection, intercostal neuralgia, loss of tube function by the pleural adhesion, intrathoracic infection, incomplete reexpansion of defective lung, hemorrhage caused by the rupture of a blood vessel, subcutaneous emphysema, lung parenchymal rupture, diaphragmatic and intraabdominal trauma, reexpansionary pulmonary edema of one side lung and cellulitis were relapsed. 84.6% of all patients recovered with only clo ed thoracostomy and the rest of patient needed additional some necessary managements and so on to have successful results. There were two deaths(0.1%), caused by reexpansionary pulmonary edema, the cellulitis were complicated by thoracostomy with UWSD on an empyema patients to come to death(due to sepsis). t UWSD = under water seal drainage

  • PDF

Developmental Plan of Man-Overboard Alert Devices of Small Fishing Vessels: A Study (소형어선의 선외추락 경보장치 개발 방안 연구)

  • Kim, Jae-Won;Kim, Byung-Ok;Lim, Jung-Gyun;Lee, Ju-Han;Yim, Jea-Hong;Park, Dong-Kook
    • Journal of Navigation and Port Research
    • /
    • v.42 no.4
    • /
    • pp.245-252
    • /
    • 2018
  • A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

Evaluation of the Usefulness of the Transmittance of Metal Filaments Fabricated by 3D Printers in Radiation Therapy (방사선 치료에서 3D 프린터로 제작된 금속 필라멘트의 투과율에 관한 유용성 평가)

  • Kwon, Kyung-Tae;Jang, Hui-Min;Yoon, Myeong-Seong
    • Journal of the Korean Society of Radiology
    • /
    • v.15 no.7
    • /
    • pp.965-973
    • /
    • 2021
  • Since radiation therapy is irradiated with high-energy X-rays in a variety of at least 20 Gy to 80 Gy, a high dose is administered to the local area where the tumor is located, and various side effects of some normal tissues are expected. Currently, in clinical practice, lead, a representative material, is used as an effort to shield normal tissues, but lead is classified as a heavy metal harmful to the human body, and a large amount of skin contact can cause poisoning. Therefore, this study intends to manufacture a measurement sheet that can compensate for the limitations of lead using the materials Tungsten, Brass, and Copper of the 3D printer of the FDM (Fused Deposition Modeling) method and to investigate the penetration performance. Tungsten mixed filament transmission measurement sheet size was 70 × 70 mm and thickness 1, 2, 4 mm using a 3D printer, and a linear accelerator (TrueBeam STx, S/N: 1187) was measured by irradiating 100 MU at SSD 100 cm and 5 cm in water using a water phantom, an ion chamber (FC-65G), and an elcetrometer (PTW UNIDOSE), and the permeability was evaluated. As a result of increasing the measurement sheet of each material by 1 mm, in the case of Tungsten sheet at 3.8 to 3.9 cm in 6 MV, the thickness of the lead shielding body was thinner than 6.5 cm, and in case of Tungsten sheet at 4.5 to 4.6 cm in 15 MV. The sheet was thinner than the existing lead shielding body thickness of 7 cm, and equivalent performance was confirmed. Through this study, the transmittance measurement sheet produced using Tungsten alloy filaments confirmed the possibility of transmission shielding in the high energy region. It has been confirmed that the usability as a substitute is also excellent. It is thought that it can be provided as basic data for the production of shielding agents with 3D printing technology in the future.

Comparison of rainfall-runoff performance based on various gridded precipitation datasets in the Mekong River basin (메콩강 유역의 격자형 강수 자료에 의한 강우-유출 모의 성능 비교·분석)

  • Kim, Younghun;Le, Xuan-Hien;Jung, Sungho;Yeon, Minho;Lee, Gihae
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.2
    • /
    • pp.75-89
    • /
    • 2023
  • As the Mekong River basin is a nationally shared river, it is difficult to collect precipitation data, and the quantitative and qualitative quality of the data sets differs from country to country, which may increase the uncertainty of hydrological analysis results. Recently, with the development of remote sensing technology, it has become easier to obtain grid-based precipitation products(GPPs), and various hydrological analysis studies have been conducted in unmeasured or large watersheds using GPPs. In this study, rainfall-runoff simulation in the Mekong River basin was conducted using the SWAT model, which is a quasi-distribution model with three satellite GPPs (TRMM, GSMaP, PERSIANN-CDR) and two GPPs (APHRODITE, GPCC). Four water level stations, Luang Prabang, Pakse, Stung Treng, and Kratie, which are major outlets of the main Mekong River, were selected, and the parameters of the SWAT model were calibrated using APHRODITE as an observation value for the period from 2001 to 2011 and runoff simulations were verified for the period form 2012 to 2013. In addition, using the ConvAE, a convolutional neural network model, spatio-temporal correction of original satellite precipitation products was performed, and rainfall-runoff performances were compared before and after correction of satellite precipitation products. The original satellite precipitation products and GPCC showed a quantitatively under- or over-estimated or spatially very different pattern compared to APHPRODITE, whereas, in the case of satellite precipitation prodcuts corrected using ConvAE, spatial correlation was dramatically improved. In the case of runoff simulation, the runoff simulation results using the satellite precipitation products corrected by ConvAE for all the outlets have significantly improved accuracy than the runoff results using original satellite precipitation products. Therefore, the bias correction technique using the ConvAE technique presented in this study can be applied in various hydrological analysis for large watersheds where rain guage network is not dense.