• 공연문화연구
• /
• 제18호
• /
• pp.315-346
• /
• 2009

신파극은 식민지라는 사회적 정황을 근거로 필연적 발생배경을 갖고 있으면서 국민들의 반일 감정을 삭이는 삶의 분출구 역할을 해왔다. 신파극에 대한 연구는 신파극이 '개화'라는 시대적 변화에 적응하며 우리 민중 기저의 흥미와 위안의 대중 문학적 역할을 하였다는 것이다. 그러나 신파극이 보여준 당시 사실주의 근대극이 추종할 수 없이 많았던 공연 횟수라든가 당대의 청관중들에게 적극적으로 다가서서 연극의 대중화 공로를 무시할 수가 없다. 그러므로 본고는 신파극이 존재했던 사회 정치 환경 속에서 신파극의 구조의 특이성들을 바탕으로 당시의 문화적인 장을 검토하여 신파극이 식민지 문화 '장' 내에서 지배이데올로기와 반응하면서 수행한 이데올로기적인 기능과 효과가 무엇이었는지를 논의하고자 한다. 그 동안 연구사에서 간과되어온 신파극의 구조와 양식적 특성 그리고 연극사 혹은 문화사적인 위치의 규정이 요구된다. 이러한 현실은 식민지시대의 국민적 정서를 도외시한 채 신파극단장들이 상업적인 측면의 번안 작품 공연에 주력하여 실질적인 우리나라 전통연극과의 단절을 가져왔으며, 한일 합방에 따라 일본 연극을 곧바로 직수입해서 모방한 오점들에 너무 지나치게 주목한 때문으로 풀이된다. 그런 점에서 이 논문은 신파극의 구조와 식민지에서의 현실인식을 연관지어 살폈다. 이를 위해 본고에서는 신파극을 우리나라 근대 연극사에서 독자적인 위치를 확보한 연극적 양식으로 보고, 이를 위해 대표적인 신파극 대본들로부터 그 구조적인 특징을 분석추출하였다. 또 그러한 신파극의 양식적 구조가 당대 사회와 어떠한 관련이 있는가를 분석했다. 그 결과, <사랑에 속고 돈에 울고>, <장한몽>을 중심으로 한 당시의 대표적 신파극은 종래의 학자들의 주장과 서양의 멜로드라마의 일반적인 '자극-고통-벌칙'의 구조와는 달리 '자극-고통-패배'의 양식적 구조를 이루며 당대 사회의 식민지의 정치-사회적 맥락과 서로 필연적 상호관계를 형성하고 있음을 파악하였다. 신파극에 의해 생산된 이미지들은 근대의 문턱에서 변화하는 사회의 서열화 된 위계구도를 수동적으로 반영하면서도, 한편으로는 그러한 위계구도를 반영하는 양식적 구조 속에서 식민지 제국주의의 정치-사회적 현실을 인식하였다. 또한 민중집단의 관계의 측면에서, 식민지 문화 '장'의 구조로서 신파극이 갖고 있는 이중성과 신파극의 사회-문화적 위치를 살펴야 한다. 신파극을 하나의 공연 혹은 문화현상으로 고려할 때, 공연 전체는 공연의 부분들 사이의 관계들로 빚어진 특징적인 귀결로 고려될 수 있다. 사회가 부분들의 유기적 관련들로 구성된 하나의 총체이듯, 신파극은 사회와의 관련 속에서 문화현상으로 표현된 또 하나의 총체이다. 이러한 신파극이라는 문화현상은 사회 안에 있는 하나의 구성물이다. 그러므로 좀 더 큰 구조들 즉 문화 '장'내에서 그것의 기능적 연관성을 밝혀낼 필요성이 존재한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.154-155
• /
• 2012

The promise of nano-crystalites (nc) as a technological material, for applications including display backplane, and solar cells, may ultimately depend on tailoring their behavior through doping and crystallinity. Impurities can strongly modify electronic and optical properties of bulk and nc semiconductors. Highly doped dopant also effect structural properties (both grain size, crystal fraction) of nc-Si thin film. As discussed in several literatures, P atoms or radicals have the tendency to reside on the surface of nc. The P-radical segregation on the nano-grain surfaces that called self-purification may reduce the possibility of new nucleation because of the five-coordination of P. In addition, the P doping levels of ${\sim}2{\times}10^{21}\;at/cm^3$ is the solubility limitation of P in Si; the solubility of nc thin film should be smaller. Therefore, the non-activated P tends to segregate on the grain boundaries and the surface of nc. These mechanisms could prevent new nucleation on the existing grain surface. Therefore, most researches shown that highly doped nc-thin film by using conventional PECVD deposition system tended to have low crystallinity, where the formation energy of nucleation should be higher than the nc surface in the intrinsic materials. If the deposition technology that can make highly doped and simultaneously highly crystallized nc at low temperature, it can lead processes of next generation flexible devices. Recently, we are developing a novel CVD technology with a neutral particle beam (NPB) source, named as neutral beam assisted CVD (NBaCVD), which controls the energy of incident neutral particles in the range of 1~300eV in order to enhance the atomic activation and crystalline of thin films at low temperatures. During the formation of the nc-/pm-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. In the case of phosphorous doped Si thin films, the doping efficiency also increased as increasing the reflector bias (i.e. increasing NPB energy). At 330V of reflector bias, activation energy of the doped nc-Si thin film reduced as low as 0.001 eV. This means dopants are fully occupied as substitutional site, even though the Si thin film has nano-sized grain structure. And activated dopant concentration is recorded as high as up to 1020 #/$cm^3$ at very low process temperature (＜ $80^{\circ}C$) process without any post annealing. Theoretical solubility for the higher dopant concentration in Si thin film for order of 1020 #/$cm^3$ can be done only high temperature process or post annealing over $650^{\circ}C$. In general, as decreasing the grain size, the dopant binding energy increases as ratio of 1 of diameter of grain and the dopant hardly be activated. The highly doped nc-Si thin film by low-temperature NBaCVD process had smaller average grain size under 10 nm (measured by GIWAXS, GISAXS and TEM analysis), but achieved very higher activation of phosphorous dopant; NB energy sufficiently transports its energy to doping and crystallization even though without supplying additional thermal energy. TEM image shows that incubation layer does not formed between nc-Si film and SiO2 under later and highly crystallized nc-Si film is constructed with uniformly distributed nano-grains in polymorphous tissues. The nucleation should be start at the first layer on the SiO2 later, but it hardly growth to be cone-shaped micro-size grains. The nc-grain evenly embedded pm-Si thin film can be formatted by competition of the nucleation and the crystal growing, which depend on the NPB energies. In the evaluation of the light soaking degradation of photoconductivity, while conventional intrinsic and n-type doped a-Si thin films appeared typical degradation of photoconductivity, all of the nc-Si thin films processed by the NBaCVD show only a few % of degradation of it. From FTIR and RAMAN spectra, the energetic hydrogen NB atoms passivate nano-grain boundaries during the NBaCVD process because of the high diffusivity and chemical potential of hydrogen atoms.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권4호
• /
• pp.393-409
• /
• 2003

본 논문에서 인터넷 정보가전과 같은 Qplus-T 내장형 시스템을 위한 멀티 태스크 디버깅 환경에 대해 제안한다. 효과적인 교차 개발을 지원하기 위해 원격 멀티 태스크 디버깅 환경의 구조 및 기능틀을 제안할 것이다. 그리고, 좀더 효율적인 교차 개발 환경의 개발을 위하여 호스트-타겟 사이에 디버깅 커뮤니케이션 아키텍쳐를 개선할 것이다. 본 논문에서 제안하는 Q+Esto라는 원격 개발 도구들은 대화형 쉘, 원격 디버거, 리소스 모니터, 타겟 매니저, 그리고 디버그 에이전트들과 같이 몇 개의 독립된 도구들로 구성된다. 호스트에서 원격 멀티 태스크 디버거를 이용해서, 개발자는 타겟 실행 시스템 위에 태스크들을 생성시키거나 디버그 할 수 있으며, 실행 중인 태스크들에 접속하여 디버그 할 수 있다. 응용 코드는 C/C++ 소스레벨로 활 수 있으며, 어셈블리 레벨 코드로도 볼 수 있다. 그리고, 소스코드, 레지스터들, 지역/전역 변수들, 스택 프레임, 메모리, 그리고 사건 트레이스 등등을 위한 다양한 디스플레이 윈도우들을 포함하고 있다. 타겟 매니저는 Q+Esto 도구들에 의해 공유되는 공통된 기능 즉, 호스트-타겟 커뮤니케이션, 오브젝트 파일 로딩, 타겟 상주 호스트 메모리 풀의 관리, 그리고 타겟 시스템 심볼 테이블 관리 등등의 기능들을 구현한다. 이러한 기능들을 개방형 C API라고 부르는데, Q+Esto의 도구들의 확장성을 크게 개선한다. 그리고, 타겟 매니저와 타겟 시스템 커뮤니케이션을 위한 상대파트 모듈 즉, 디버그 에이전트가 존재하는데, 이것은 타겟의 실시간 운영체제 위에서 데몬 태스크 형태로 수행된다. 디버거를 포함한 호스트 도구로부터의 디버깅 요청을 밟아, 그것을 해석하고 실행하여, 그 결과론 호스트에 보내는 기능을 수행한다.

• Asia pacific journal of information systems
• /
• 제22권3호
• /
• pp.75-97
• /
• 2012

Knowledge residing in the heads of employees has always been regarded as one of the most critical resources within a firm. However, many tries to facilitate knowledge transfer among employees has been unsuccessful because of the motivational and cognitive problems between the knowledge source and the recipient. Social capital, which is defined as "the sum of the actual and potential resources embedded within, available through, derived from the network of relationships possessed by an individual or social unit [Nahapiet and Ghoshal, 1998]," is suggested to resolve these motivational and cognitive problems of knowledge transfer. In Social capital theory, there are two research streams. One insists that social capital strengthens group solidarity and brings up cooperative behaviors among group members, such as voluntary help to colleagues. Therefore, social capital can motivate an expert to transfer his/her knowledge to a colleague in need without any direct reward. The other stream insists that social capital provides an access to various resources that the owner of social capital doesn't possess directly. In knowledge transfer context, an employee with social capital can access and learn much knowledge from his/her colleagues. Therefore, social capital provides benefits to both the knowledge source and the recipient in different ways. However, prior research on knowledge transfer and social capital is mostly limited to either of the research stream of social capital and covered only the knowledge source's or the knowledge recipient's perspective. Social network theory which focuses on the structural dimension of social capital provides clear explanation about the in-depth mechanisms of social capital's two different benefits. 'Strong tie' builds up identification, trust, and emotional attachment between the knowledge source and the recipient; therefore, it motivates the knowledge source to transfer his/her knowledge to the recipient. On the other hand, 'weak tie' easily expands to 'diverse' knowledge sources because it does not take much effort to manage. Therefore, the real value of 'weak tie' comes from the 'diverse network structure,' not the 'weak tie' itself. It implies that the two different perspectives on strength of ties can co-exist. For example, an extroverted employee can manage many 'strong' ties with 'various' colleagues. In this regards, the individual-level structure of one's relationships as well as the dyadic-level relationship should be considered together to provide a holistic view of social capital. In addition, interaction effect between individual-level characteristics and dyadic-level characteristics can be examined, too. Based on these arguments, this study has following research questions. (1) How does the social capital of the knowledge source and the recipient influence knowledge transfer respectively? (2) How does the strength of ties between the knowledge source and the recipient influence knowledge transfer? (3) How does the social capital of the knowledge source and the recipient influence the effect of the strength of ties between the knowledge source and the recipient on knowledge transfer? Based on Social capital theory and Social network theory, a multi-level research model is developed to consider both the individual-level social capital of the knowledge source and the recipient and the dyadic-level strength of relationship between the knowledge source and the recipient. 'Cross-classified random effect model,' one of the multi-level analysis methods, is adopted to analyze the survey responses from 337 R&D employees. The results of analysis provide several findings. First, among three dimensions of the knowledge source's social capital, network centrality (i.e., structural dimension) shows the significant direct effect on knowledge transfer. On the other hand, the knowledge recipient's network centrality is not influential. Instead, it strengthens the influence of the strength of ties between the knowledge source and the recipient on knowledge transfer. It means that the knowledge source's network centrality does not directly increase knowledge transfer. Instead, by providing access to various knowledge sources, the network centrality provides only the context where the strong tie between the knowledge source and the recipient leads to effective knowledge transfer. In short, network centrality has indirect effect on knowledge transfer from the knowledge recipient's perspective, while it has direct effect from the knowledge source's perspective. This is the most important contribution of this research. In addition, contrary to the research hypothesis, company tenure of the knowledge recipient negatively influences knowledge transfer. It means that experienced employees do not look for new knowledge and stick to their own knowledge. This is also an interesting result. One of the possible reasons is the hierarchical culture of Korea, such as a fear of losing face in front of subordinates. In a research methodology perspective, multi-level analysis adopted in this study seems to be very promising in management research area which has a multi-level data structure, such as employee-team-department-company. In addition, social network analysis is also a promising research approach with an exploding availability of online social network data.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.528-543
• /
• 2005

Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.

• 치과방사선
• /
• 제21권2호
• /
• pp.203-220
• /
• 1991

The purpose of this study was to investigate the changes of morphology and structure of bone tissue, caused by administration of high-dose hydrocortisone, elcatonin and cyclophosphamide. In order to carry out experiment, 60 four-week old Sprague-Dawley strain rats weighing about 107 gms were selected and divided into experimental group and control group. The experimental group was subdivided into three groups, assigned fifteen rats for each group, by the different drugs administered. Each experimental group was then categorized as follows: hydrocortisone 30㎎/㎏ b.w. with daily subcutaneous injection, elcatonin 20U/㎏ b.w. with daily subcutaneous injection, and cyclophosphamide 100㎎/㎏ b.w. with a single intraperitoneal injection. Fifteen rats were injected daily with 5㎖/㎏ b.w. of normal saline solution subcutaneously in control group. Rats in control group and experimental group were serially sacrificed on the 6th, the 15th and the 22nd day after injection of normal saline, hydrocortisone, elcatonin and cyclophosphamide, respectively. Being sacrificed, both sides of mandibular condyles were removed and fixed with 10% neutral formaline. The one side of mandibular condyles was radiographed with soft X-ray apparatus. Thereafter, the obtained radiographs were observed, and the bone density of condylar head and condylar neck regions was measured by use of transferring video-based digital radiograph. The other side was further decalcified and embedded in paraffin as usual manner, then sectioned and stained with hematoxylin and eosin, observed by light microscope. The obtained results were as follows: 1. Sclerotic changes with regularly increased trabecular pattern were seen throughout experimental periods in hydrocortisone group. Increased the number of trabecular pattern with irregularity and periodic striation on the periphery of condylar head region were appeared with lapse of time in elcatonin group. In cyclophosphamide group, irregular trabecular pattern and stippled radiopacities on mandibular condyle were observed with lapse of time. 2. The bone density of condylar head region was increased in hydrocortisone group, decreased in elcatonin group, and tended to be decreased in cyclophosphamide group, compared with that of control group according to the experimental periods. 3. The bone density of condylar neck region tended to be rather increased in hydrocortisone group, elcatonin group and cyclophosphamide group, depending on the experimental periods. 4. In microscopic studies, there were irregular trabecular bonds and osteoblastic activity in hydrocortisone group and elcatonin group throughout experimental periods, degenerative cartilage and trabecular bones in the 6th day and densely calcified trabecular bones in the 22nd day in cyclophosphamide group.

• 치과방사선
• /
• 제22권2호
• /
• pp.241-252
• /
• 1992

The purpose of this study was to investigate the changes of morphology and structure of bone tissue in the irradiated mandibular bone in rats which were fed a low calcium diet. In order to carry out this experimant, 64 seven-week old Sprague-Dawley strain rats weighing about 150gms were selected and equally divided into one experimental group of 32 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two groups when the rats reached ten-week old, 16 were assigned rats for each subdivided group, exposed to irradiation. The two irradiation groups received a single dose of 20 Gy in the jaws area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. Following termination, both sides of the dead rats mandibular bodies were removed and fixed with 10% neutral formalin. One side of the mandibular body was radiographed with a soft X-ray apparatus. Thereafter, the obtained microradiographs were observed by a light microscope. The remaining side of the mandibular bone was further decalcified and embedded in paraffin as using the general method. The specimen sectioned and stained with hematoxylin and eosin, and Rabit Anti-Human Tumor Necrosis Factor-a, observed by a light microscope. The obtained results were as follows: 1. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of the interradicular bone and mandibular body were observed and noted from the start to finish throughout the experiment in the non-irradiated rats on the low calcium diet rather than in the non-irradiated rats on the normal diet. In microscopic observations, there were marked osteolytic changes in the center of the bone marrow. 2. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of interradicular bone and mandibular body were more marked after 7 days in the irradiated rats on the low calcium diet rather than in the non-irradiated rats on the low clacium diet. In microscopic observations, osteoblasts were decreased markedly after 7 days, and a few osteoclasts were observed. 3. Microradiogram revealed that thinning of the cortex and a decrease in trabecula of interradicular bone and the mandibular body were more marked from the strart to finish troughout the experiment in the irradiated rats on the low calcium diet rather than in the irradiated rats on the normal diet. In microscopic observations, there were no osteolytic changes noted in the irradiated rats on the normal diet. 4. In immunocytochemical findings, a few bone marrow cells including Tumor Necrosis Factor were observed in the irradiated rats on the normal diet, but was not observed in the rats on the low calcium diet.

• 토지주택연구
• /
• 제5권2호
• /
• pp.115-120
• /
• 2014

현재 국내 내진설계기준에서 제시하고 있는 지반분류 방법 및 지반 증폭계수는 기반암이 주로 30m 이내에 위치하는 일반적인 국내 지반특성을 제대로 반영하지 못하고 있다. 따라서, 본 연구에서는 점성토 지반에 근입된 비정형 말뚝기초(PHC 500, 중심 간격 3D)에 대한 동적 원심모형 실험을 실시하여 자유장과 기초판의 응답 스펙트럼 결과를 비교하였다. 장주기 영역에서는 SE 지반의 설계 스펙트럼 가속도보다 기초와 자유장에서 계측된 실제 스펙트럼 가속도가 작게 나타났고, 기초에서 발생한 스펙트럼 가속도는 지진 하중이 커지면 SD 지반의 설계 스펙트럼 가속도와 유사해지는 것을 확인할 수 있었다. 이것은 연약한 지반(SE 지반)에 대한 현행 설계기준이 지진 하중을 과대평가하고 있으며 비경제적 설계를 할 수 있음을 의미한다. 1.5초 이상의 장주기 영역에서는 실험에서 측정된 스펙트럼 가속도가 SC 지반의 표준설계응답스펙트럼 가속도보다 작게 나타났고 기초 및 자유장 조건에 의한 스펙트럼 가속도 차이가 거의 발생하지 않았다. 따라서, 실제 아파트에 해당하는 1.5초 이상의 장주기에서는 국내 지반조건을 고려하여 실험에서 측정된 스펙트럼 가속도를 설계에 적용하면 표준설계스펙트럼을 적용할 때 보다 경제적인 설계가 가능한 것으로 나타났다.

• 한국과학교육학회지
• /
• 제34권2호
• /
• pp.107-122
• /
• 2014

본 연구에서는 국내에서 발표된 논의 및 과학 글쓰기 관련 논문을 대상으로 연구 문제, 연구 대상, 연구 방법 및 논의 및 과학 글쓰기 활동 적용 방식과 어떠한 측면에서 그 결과를 분석하고 있는지 알아봄으로써 논의 및 과학 글쓰기 관련 연구의 동향을 살펴보고 후속 연구의 방향을 제시하고자 한다. 2004년부터 2013년까지 논의 및 과학 글쓰기 관련 연구 118편을 수집하여 분석하였다. 최근 10년간 논의 및 과학 글쓰기 관련 연구는 점점 증가하는 추세이고 2008년 이후에 관련 연구가 활성화되고 있다는 것을 알 수 있었다. 교수 학습 전략을 개발, 논의 및 과학 글쓰기 활동에 대한 내용 분석, 그 효과 분석의 순으로 연구 문제가 선정된 것으로 나타났다. 초등학생과 중학생을 대상으로 한 연구에 비해 예비 교사 및 현장 교사를 대상으로 한 연구와 고등학생을 대상으로 한 연구는 적었다. 연구 방법은 양적 연구, 질적 연구, 혼합 연구가 비교적 고르게 적용되고 있었다. 또한 연구 대상에게 논의 및 과학 글쓰기 관련 사전 교육을 진행하거나 관련 자료를 제시한 연구가 증가하고 있었다. 논의 및 과학 글쓰기 적용 후에 학생들의 과학에 대한 태도를 분석한 연구가 많았는데, 과학 개념, 과학 탐구 능력, 비판적 사고력 향상 등의 분석에 좀 더 초점을 두어야 할 것이다. 많은 연구에서 논의 구조와 논의 과정 또는 과학 글쓰기에 포함된 내용과 글쓰기의 형태 분석을 해왔다. 향후에는 논의의 수준 또는 과학 글쓰기에 포함된 과학 개념을 함께 분석하는 연구가 활발하게 진행되기를 제안한다.

• 전자공학회논문지
• /
• 제53권7호
• /
• pp.67-77
• /
• 2016

본 논문에서는 변형된 하우스더프 거리 (MDH: Modified Hausdorff Distance)를 이용한 눈 개폐 감지 알고리즘을 제안한다. 제안하는 알고리즘은 얼굴 검출과 눈 개폐 감지로 크게 구분된다. 얼굴 영역의 검출을 위하여 고정 크기의 영역 내에서 픽셀 값을 이용하는 지역 구조특성의 MCT (Modified Census Transform)특징기반 방법을 사용하였다. 이후, 검출된 얼굴 영역 내에서 MHD를 이용하여 눈의 위치 및 개폐를 판단한다. 얼굴 검출의 처리절차는 먼저, 오프라인에서 다양한 얼굴 영상에 대해 MCT 이미지를 생성하고, 이를 기반으로 PCA를 이용하여 기준이 되는 특징벡터들을 추출한다. 다음으로, 온라인에서는 입력되는 실험 영상 내에서 새롭게 추출된 특징벡터들과 기준이 되는 특징 벡터들 간의 유클리드 거리를 이용하여 얼굴 영역을 검출하는 순서로 진행된다. 이후, 검출된 얼굴 영역 내에서 MHD 기반의 눈 영역 검출과 템플릿 매칭을 수행하여 눈의 개폐를 감지한다. 제안하는 방법의 성능 검증을 위하여 그레이 스케일 영상 (30FPS, $320{\times}180$)을 입력으로 실험을 수행한 결과, 눈 계폐 검출율에서 평균 94.04%의 정확도를 달성하였다.