• Journal of Internet Computing and Services
• /
• v.6 no.4
• /
• pp.47-58
• /
• 2005

There are two major type of flash memory products, namely, NAND-type and NOR-type flash memory. NOR-type flash memory is generally deployed as ROM BIOS code storage because if offers Byte I/O and fast read operation. However, NOR-type flash memory is more expensive than NAND-type flash memory in terms of the cost per byte ratio, and hence NAND type flash memory is more widely used as large data storage such as embedded Linux file systems. In this paper, we designed an efficient flash memory file system based an Embedded system and presented to make up for reduced to Swapping a weak System Performance to flash file system using NAND-type flash memory, then proposed Swapping algorithm insured to an Execution time. Based on Implementation and simulation studies, Then, We improved performance bases on NAND-type flash memory to the requirement of the embedded system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.280-282
• /
• 2012

Wi-Fi P2P는 Wi-Fi Alliance에 의해 제정된 표준 규격으로 근접 거리에 위치한 장치들간의 효율적이고 빠른 데이터 송수신을 위해 IEEE 802.11n을 이용하고 있다. 근접거리 통신을 위한 기존 블루투스 등의 규격이 갖는 단점을 보완했다는 점에 있어 높은 평가를 받고 있으며, 모바일 디바이스용 플랫폼인 Android ICS 버전부터 공식적으로 지원됨에 따라 널리 사용될 것으로 전망된다. 한편, 한국전자통신연구원(ETRI)에서는 오랫동안 PAN 수준의 네트워킹을 연구해왔으며 그 일환으로 PAN 및 M2M에 적합한 통신 수단으로 여겨지는 Wi-Fi P2P에 대한 연구도 진행 중에 있다. 이에 본 논문에서는 ETRI가 과제를 수행하면서 부수적으로 연구한 Wi-Fi P2P를 위한 Linux용 플랫폼 구조를 공유하고자 한다. 특히 Linux Wireless 프로젝트인 hostap에 속한 wpa_supplicant를 이용해 실제로 동작하는 Wi-Fi P2P 커넥션 매니저를 설계하고 구현하는 방법을 설명함으로써 Android 플랫폼이 아닌 일반적인 Linux 장치에서 Wi-Fi P2P를 사용할 수 있는 방법에 대해 논한다.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.164-173
• /
• 2001

In this paper, we have designed and implemented a new hard embedded real-time system to satisfy hard real-time constraints in moving independently. Real-time kernel should be small size, fast and predictable. Because of the great variety of demands on real time scheduling, a real time kernel should also include a flexible and re-programmable task scheduling discipline. In this paper, we present that real-time applications should be split into small and simple parts with hard real-time constraints. To satisfy these properties, we designed real-time kernel and general kernel, that have their different properties. In real-time tasks, interrupt processing should be run. In general kernel, non real time tasks or general tasks are run. The efficiency of the proposed hard embedded real-time system is shown by comparison results for performance of the proposal real time kernel with both RT-Linux and QNX.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1173-1178
• /
• 2007

Ubiquitous sensor network (USN) is composed of many sensor nodes which are one of the simplest form of embedded system. In developing the sensor network system, a debugging tool is necessary to test and verify the system. Recently, a so-called packet analyzer has been developed for this purpose, and it supports IEEE 802.15.4 which is considered as the standard for the sensor network protocols. The major function of the packet analyzer is to take RF packets from sensor nodes and show the structure and the data of the packets graphically to the user. However, the conventional packet analyzers do not support remote control because they require a USB interface along with a personal computer. To make it available for remote control, we propose a new packet analyzer based on a server-client scheme in which a server program is implemented on embedded Linux and a client program is implemented on Windows for convenient use.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.569-572
• /
• 2008

I proposed wireless ordering system using Qt embedded. This system will make the good use of real life applications and make fit for practical use. I embodied data input, transfer, gathering and back-transfer on wireless network using TCP/IP protocol on QSocket provided by Qt. Server environment is Linux 9.0 and gcc-2.95.3 on PC, and three target-boards consist PXA255 processor with wireless-LAN card which communicate through wireless access pointer. Software tools on target-board are gcc, tmake, qt-X11, qt-embedded and etc. I designed touch-screen interface for user convenience.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.104-110
• /
• 2006

In this paper, we proposed the micro web-server implementation on Strong ARM processor with embedded Linux. The parallel port connecting parallel I/O is controlled via HTTP protocol and web browser program HTTP protocol with Linux, the micro web server program and port control program are installed on-board memory using CGI to be accessed by web browser. The processor parallel input port is monitored and parallel output port is controlled from remote hosts via HTTP protocol. The result of the proposed embedded micro-web server can be used in remote automation systems, distributed control via internet using web browser.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.355-357
• /
• 2014

Linux environment that is commonly used at embedded systems, supports various file systems as Ext2, FAT, NTFS, ets. The file system that is equiped on the embedded system is mostly implemented on mini hard disk or flash memory. The types of the file system of the system make an effect on the performance of a application programs. The factors of file system performance on a same media are block allocation and block free time. On these factors, block free time is not so different according to the type of file systems. This thesis performs the performance benchmark of a Ext2, FAT and NTFS file systems about block allocation performance. As the result, it is discussed that what file system is better at which case.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.6-25
• /
• 2002

In this paper, we have implemented UPnP Devices which emulate a Control Point, a Light Controller, and a Digital TV. The Control Point has been developed on Linux host system by using C language. The UPnP Devices emulating the Digital TV and Light Controller are running on embedded linux developer board. For the development of UPnP Devices, UPnP SDK API Vl.04 made by Intel Co. Ltd. has been ported on Assabet Linux Reference board to implement the UPnP protocol. After we analyze and design some services of Digital TV device, we have applied UPnP Device program to those devices. UPnP SDK vl .04 consists of APIs which support HTTP, SSDP, SOAP, GENA and XML DOM Level-1 that are cores of UPnP protocol. The C program written for the UPnP Control Point has been compiled and executed on Linux-based PC. The embedded system running on Embedded Linux OS has been connected all together through Ethernet which allows IP-based communications. Under this environment, the UPnP programs are being executed on each device. Control Point, when in operational mode, discovers UPnP Devices on the network and displays the device list on the consol. By selecting one of the functionalities of the device services that are displayed on the Control Point, the controllability has been accomplished. The experiment that we performed in this thesis have revealed that the Control Point and UPnP Devices have supported the protocols including SSDP, SOAP, GENA, and DHCP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.641-644
• /
• 2008

This paper describes the GUI implementation of an intelligent embedded system which can be used for a personal information platform and an industrial mobile application system. It shows the architecture and the necessary structure and components of X Window graphic system. The embedded system used in this paper has low power and high performance processor, and has a large memory size with a nand-flash memory device. We configured the linux kernel with a TIT-LCD and touch screen device for the operation of X Window system. And we used GTK+2 for running application softwares on the platform embedded system. The GUI library of GTK+2 is useful for providing the same graphics programming environment with host Linux PC. We have developed in this paper the X Window system and the GUI environment for GTK+2 in a new embedded system, and verified the full operation of X Window system and application softwares using GTK+2. The embedded system with large memory size can be used in X Window application softwares for providing a personal information service with a mobile embedded system.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.958-966
• /
• 2007

In this paper, we implement a sound-enhanced MPEG-1 audio decoder on embedded OS Platform. Low bit rate lossy audio codecs such as MP3, OGG, and AAC for mitigating the problems in storage space and network bandwidth suffer a major common problem such as a loss of high frequency fidelity of audio signal. This high frequency loss will reproduce only a band-limited low-frequency part of audio in the standard CD-quality audio. In order to overcome this problem, we embedded a sound enhancement algorithm into the MPEG-1 audio decoder and then the algorithms optimized according to the characteristic of the MPEG-1 audio layer I, II, III were implemented on an embedded OS platform. From the experimental results with spectrum analysis and listening test, we confirm the superiority of the proposed system compared to the standard MPEG-1 audio decoder.