• 한국멀티미디어학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 2001

경계 주사 구조(Boundary Scan Architecture)기 법은 복잡한 인쇄 회로 기판(PCB : Printed Circuit Board)을 테스트하기 위해 도입되었다. 이러한 경계 주사 구조는 시스템의 정상 동작에 간섭을 주지 않고 시스템의 동작 상태를 실시간 모니터링 하는데 대단한 잠재력을 지니고 있다. 본 논문에서는 경계 주사 구조를 이용하여 시스템의 작동 상태를 실시간으로 모니터 하기 위한 새로운 실장 제어기를 제안하고 설계한다. 제안된 실시간 모니터링 실장 제어기는 경계 주사 구조의 경계 주사 셀 제어기(Test Access Port Controller)와 범용 실장 제어기(Embedded Controller)로 구성되어 있다. 제안된 경계 주사 구조를 이용한 실시간 모니터링 실장제어기는 하드와이어의 자원을 절약해 주고 경계 주사 구조를 지니고 있는 칩에 쉽게 인터페이스 된다. 실험 결과는 제안된 실장제어 기가 시스템의 동작 상태를 실시간 모니터 하는데 호스트 컴퓨터에 의한 모니터 링에 비해 효과적임을 보여준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.45.4-45
• /
• 2001

In this paper, we present the wet-based monitoring system for industrial controller such as inverter controller for hydraulic elevators. The monitoring system is using an embedded web server on embedded Linux platform. The control board of system-On-Chip (SoC) is based on ARM7TDMI with Ethernet controller. Wet-based monitoring system using embedded Linux platform can reduce the cost, and have flexibility both of technical issues and locations If the system to be monitored. The system shows the feasibility of remote monitoring system based on embedded Linux platform.

• 대한임베디드공학회논문지
• /
• 제15권6호
• /
• pp.269-279
• /
• 2020

This paper presents the design and implementation of embedded systems and autonomous path generation for autonomous speed sprayer. Autonomous Orchard Systems can be divided into embedded controller and path generation module. Embedded controller receives analog sensor data, on/off switch data and control linear actuator, break, clutch and steering module. In path generation part, we get 3D cloud point using Velodyne VLP16 LIDAR sensor and process the point cloud to generate maps, do localization, generate driving path. Then, it finally generates velocity and rotation angle in real time, and sends the data to embedded controller. Embedded controller controls steering wheel based on the received data. The developed autonomous speed sprayer is verified in test-bed with apple tree-shaped artworks.

• Journal of Information Processing Systems
• /
• 제2권3호
• /
• pp.143-146
• /
• 2006

We have designed an embedded controller for the control of a diesel generator using an embedded system. The generator is monitored and controlled remotely via the internet in real-time. The proposed digital controller is designed to handle precisely the distortions and noises of the signals emanating from the diesel generator, and enables abnormal operation of the diesel generator to be notified to the remote manager using the Short Message Service (SMS) of the Internet, which enables the appropriate personnel to take action by remote control according to the incoming messages.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.428-433
• /
• 2004

In this paper, we developed a multi-protocol controller based on SoC and embedded Linux and applied it to integrate with BAS in a unified TCP/IP socket communication. The multi-protocol controller integrates control networks of RS-485 and LonWorks devices to BAS. The system consists of three-tier architecture, such as a BAS, a multi-protocol converter, and control devices. By using UML, we modeled the system architecture. In order to show the feasibility of system architecture, it was applied to a small BAS system. The experimental results show that the multi-protocol controller using embedded Linux is flexible and effective way to develop a building control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1655-1658
• /
• 2004

In this paper, we design and implement remote servo motor control system with real-time micro embedded operating system. The system, where controller and camera image grabber are mounted, handles control commands transmitted from a remote PC web browser. A hard real-time servo motor driver running on the real-time micro embedded OS and then a digital control application which confirms precise sampling time intervals is constructed. Frame grabber images transmitted from camera are saved in a image data format to view on remote PC web browser.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권3호
• /
• pp.173-182
• /
• 2015

다양한 산업 자동화 분야에 활용되고 있는 모션 제어 시스템의 핵심 요소인 모션 제어기는 모션 명령의 전송의 주기성과 각 모터 드라이브 간 동작시점의 편차 최소화 등 실시간 성능 요구사항을 가진다. 이러한 요구사항을 만족시키기 위해 모션 제어기는 전통적으로 하드웨어 중심의 전용기 형태로 구현되어 왔으나 시스템 간 호환성과 확장성의 한계로 소프트웨어 중심의 범용 모션 제어기로 대체되는 추세이다. 한편 최근에는 저비용, 고성능의 범용 임베디드 플랫폼을 이용한 모션 제어기에 대한 관심도 커지고 있다. 본 논문에서는 고정밀 모션 제어 응용을 위해 ARM 기반 범용 임베디드 보드 상에서 Xenomai 기반 임베디드 제어기를 오픈소스 소프트웨어로 구현한 결과를 제시한다. 구현된 임베디드 제어기의 성능 평가를 위해 실제 응용 상황에서 측정 실험을 수행하였으며, 실험 결과 구현된 제어기는 드라이브 3개를 2 ms 제어주기로 동시 구동하는 환경에서도 안정적인 성능을 보임을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1827-1834
• /
• 2016

This paper presents a high efficient generator with PM(Permanent Magnet) exciter. The proposed PM exciter for the generator can produce a linear output voltage according to the engine speed. This output voltage is directly used to control the field current of the generator to adjust the generator output voltage. In the proposed generator system, since the field winding current can be supplied by the PM exciter, the generator can self-start without any battery or an external power supply due to the low residential flux. Furthermore, the operating efficiency of the generator is higher than a conventional winding exciter. The main problem of the proposed generator system, the field winding current controller has to be embedded inside the generator, and it rotates according to the generator shaft. In this paper, the proper embedded current controller is designed for the proposed generator system. Due to the embedded controller cannot be connected to the outside the generator controller, the measured instantaneous output voltage of the generator is transferred by the photo isolated communication using shaft aligned infrared transmitter and receiver to keep the constant generator output voltage. In this paper, 10kW, 380V engine generator with PM exciter and the embedded DAVR(Digital Automatic Voltage Regulator) are described. The proposed high efficiency generator is simulated and tested to verify the effectiveness.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.577-583
• /
• 2014

In this study, we introduce how to apply "Information and Communication Technology (ICT) to injection molding system. We report the current state of IT technology applied to produce their products in micro lens injection molding system. And we explain key technology of ICT for injection molding system and how to implement. Especially, we also mention about an embedded controller, also called as "M2M device". It provides programmable intelligent functions, communication, various interfaces, amplifier functions and mobile device connection to our application.