• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.33-37
• /
• 2009

Fiber Bragg grating (FBG) sensors already have been the focus for structural health monitoring (SHM) due to their distinguishing advantages. However, as bare optical fiber is very fragile, bare FBG strain sensor without encapsulation can not properly be applied in practical infrastructures. Therefore encapsulation techniques for making encapsulated FBG strain sensor show very important in pushing forward the application of FBG strain sensors in SHM. In this paper, a simplified approximate method to analyze the stress transferring rules for embedded FBG strain sensors in concrete monitoring is put forward according to mechanics of composite materials. Shear lag theory is applied to analyze the stress transferring rule of embedded FBG strain sensor in measured host material at the first time. The measured host objects (concrete) and the encapsulated FBG strain sensor are regarded as a composite, and then the stress transfer formula and stress transfer coefficient of encapsulated FBG strain sensor are obtained.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 기초기술학술발표회
• /
• pp.103-117
• /
• 2002

During the installation of drilled shafts in very soft ground, to keep the pile shape and to central concrete quality, casing method (wrinkled pipe and embedded steel pipe) and non-casing method have been used. In the construction cost, non-casing method was the most economical. When the wrinkled pipe and the embedded steel pipe casing method are used, an increase of 133% and 123% in the construction cost could be seen. When concrete for drilled shaft was placed under groundwater, underwater unseparation concrete would be used to restrain the concretes's material separation and to control the concrete quality. On the condition of required unseparable and (lowing property was assured, use of less amount of mixed material and flowing material must be recommended.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.40-41
• /
• 2018

The purpose of this study is to compare the amount of critical chloride of rebar embedded in concrete according to the substitution rate of admixture. In order to determine the starting point of corrosion of rebar, electrodes were embedded in concrete, chloride was supplied, and OCP of rebar was observed in real time. The amount of the contaminants in the concrete surrounding the rebar was judged to be the critical corrosion chloride contents of the rebar at the start of the corrosion. As a result of the comparative evaluation, it was confirmed that the critical chloride contents of the rebar decreased with increasing the substitution ratio of the admixture.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.42-49
• /
• 2009

배전용 콘크리트 전주에 작용하는 힘들이 지반의 변위에 미치는 영향을 유한요소법을 이용하여 분석하였다. 지반의 종류, 풍하중, 근가의 위치, 매입길이, 경간의 길이를 변화시키며 단전주와 겹전주의 경우에 지반의 변위를 분석하였다. 근가의 위치는 매입길이의 1/4지점에서 변위가 최소로 나타났다. 지반의 종류는 지반의 강성이 클수록 변위가 작아서 연약한 점토나 느슨한 모래지반 또는 실트 지반은 변위가 크다. 겹전주는 굴착면적이 커서 변위가 다소 큰 것으로 판단되며 시공시에는 콘크리트보강이 필요하다. 지표면에 가까울수록 횡방향 변위는 매입길이비가 작은 전주가 더 크게 나타났다. 횡방향 변위를 줄이기 위해서는 매입길이를 크게 하는 것이 좋다. 경간길이는 횡방향 변위에 영향이 별로 없는 것으로 나타났다.

• 터널과지하공간
• /
• 제21권3호
• /
• pp.164-173
• /
• 2011

본 연구에서는 압축공기에너지 저장 공동의 콘크리트 플러그 최적 형상을 조사하기 위해 플러그 형상에 따른 저장 공동의 안정성을 수치해석적으로 평가하였다. 고려한 플러그 형상은 원통형, 암반에 근입된 원통형, 테이퍼형, 쐐기형이었고, 강도감소법에 의한 안전율과 압축 공기의 압력으로 인해 콘크리트에 발생하는 항복 영역의 부피비를 토대로 안정성을 분석하였다. 안정성 분석 결과, 암반에 근입된 원통형과 테이퍼형 플러그가 원통형과 쐐기형 플러그보다 역학적으로 더 안정한 것으로 분석되었다. 그러나 암반에 근입된 플러그의 경우 플러그와 암반이 접촉하는 부분에서 응력 집중이 발생하여 암반에 근입된 원통형 플러그보다는 테이퍼형 플러그 가 최적의 형상인 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.450-455
• /
• 1998

In this paper, finite element with embedded discontinuous line is introduced in order to avoid the difficulties of adding new nodal points along with crack growth in discrete crack model. With the discontinuous element using discontinuous shape function, stiffness matrix of finite element is derived and dual mapping technique for numerical integration is employed. Using the finite element program made with employed algorithms, algorithm is verified and fracture analysis of simple concrete beam is performed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.428-431
• /
• 2004

Smart structural system is defined as structural system with a certain-level of autonomy relying on the embedded functions of sensors, actuators and processors, that can automatically adjust structural characteristics, in response to the change in external disturbance and environments, toward structural safety and serviceability as well as the extension of structural service life. In this study, carbon and glass hybrid fiber materials were investigated fundamentally for the applicability of self diagnosis in smart concrete structural system as embedded functions of sensors.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.97-98
• /
• 2009

본 연구에서는 비균열 콘크리트에 설치되는 후설치 앵커의 인장 및 전단 시험 방법을 제안하였으며 검증실험을 수행함으로써 앵커의 설계강도를 결정하기 위한 시험방법을 정립하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.391-394
• /
• 2005

The seismic performance of bridge piers is evaluated in general by displacement terms, which are yielded not only by the member deformation but also by the pull-out of longitudinal bars embedded into foundation concrete. It is, therefore, important to understand the characteristic of pull-out effect in the view of seismic performance. In this study the specimens with different material strengths and diameters of re-bar were tested and the stree-slip were reported.

• 한국지진공학회논문집
• /
• 제24권1호
• /
• pp.29-37
• /
• 2020

This study is to investigate the effect of a retrofitted reinforced concrete frame with non-seismic details strengthened by embedded steel moment frames with an indirect joint, which mitigates the problems of the direct joint method. First, full-scale experiments were conducted to confirm the structural behavior of a 2-story reinforced concrete frame with non-seismic details and strengthened by a steel moment frame with an indirect joint. The reinforced concrete frame with non-seismic details showed a maximum strength of 185 kN at an overall drift ratio of 1.75%. The flexural-shear failure of columns was governed, and shear cracks were concentrated at the beam-column joints. The reinforced concrete frame strengthened by the embedded steel moment frames achieved a maximum strength of 701 kN at an overall drift ratio of 1.5% so that the maximum strength was about 3.8 times that of the specimen with non-seismic details. The failure pattern of the retrofitted specimen was the loss of bond strength between the concrete and the rebars of the columns caused by a prying action of the bottom indirect joint because of lateral force. Furthermore, methods are proposed for calculation of the specified strength of the reinforced concrete frame with non-seismic details and strengthened by the steel moment frame with the indirect joint.