• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.110.2-110.2
• /
• 2012

We investigate a cool loop and a dark lane over a limb active region on 2007 March 14 by the Hinode/EUV Imaging Spectrometer (EIS). The cool loop is clearly seen in the EIS spectral lines formed at the transition region temperature (log T = 5.8). The dark lane is characterized by an elongated faint structure in coronal spectral lines (log T = 5.8 - 6.1) and rooted on a bright point. We examine their electron densities, Doppler velocities, and non-thermal velocities as a function of distance from the limb using the spectral lines formed at different temperatures (log T = 5.4 - 6.4). The electron densities of the cool loop and the dark lane are derived from the density sensitive line pairs of Mg VII, Fe XII, and Fe XIV spectra. Under the hydrostatic equilibrium and isothermal assumption, we determine their temperatures from the density scale height. Comparing the scale height temperatures to the peak formation temperatures of the spectral lines, we note that the scale height temperature of the cool loop is consistent with a peak formation temperature of the Mg VII (log T = 5.8) and the scale height temperature of the dark lane is close to a peak formation temperature of the Fe XII and Fe XIII (log T = 6.1 - 6.2). It is interesting to note that the structures of the cool loop and the dark lane are most visible in these temperature lines. While the non-thermal velocity in the cool loop slightly decreases (less than 7 km $s^{-1}$) along the loop, that in the dark lane sharply falls off with height. The variation of non-thermal velocity with height in the cool loop and the dark lane is contrast to that in off-limb polar coronal holes which are considered as source of the fast solar wind. Such a decrease in the non-thermal velocity may be explained by wave damping near the solar surface or turbulence due to magnetic reconnection near the bright point.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.149-156
• /
• 2009

Fine structure of the dry adhesion system in the tarsal appendages of the jumping spider Plexippus setipes (Araneae: Salticidae) with examined using field emission scanning electron microscope (FESEM). The jumping spiders have the distinctive attachment apparatus for adhesion on smooth dry surface without sticky fluids. They attach to rough substrates using tarsal claws, however attachment on smooth surfaces is achieved by means of a tuft-like hair called a scopula. All eight legs have the scopulae with a pair of claws on the tip of feet, and each scopula is composed of two groups of setae that are capable of dry adhesion on smooth surface. The apex of each seta is flattened pad bearing many specialized adhesive setules on one side. The cuticular sensillae are interspersed at the dorsal surface of the seta. It has been revealed by this research that the contact area of the setule is always a triangular shape, and these cuticular surfaces are connected by the elongated stalks from the underlying setae. Moreover, adhesion between the numerous setules and the setae was prevented by the microscopic hairs, since these were interspersed on the upper side of the setae.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.7-24
• /
• 1989

The physical properties of seven sizes of control groups and experimental group in stainless steel orthodontic wires were studied in tension, hardness, bending, torsion and observation of microstructure. The wires (0.40-0.90mm dia.) of round type were tested in the as-received condition. The wires of control groups were TRU-CHROME and REMANIUM, and experimental group was SK wire which was developed by ourselves and made in Korea. The results were as follows; 1. The chemical compositions of control groups and experimental group were austenite stainless steel wires of SOS 304. 2. Higher values of tensile and yield strength in tension were control group I, experimental group, control group II. Maximum tensile and yield strength of experimental group were $203.63{\pm}1.41kg/mm^2$ in 0.70mm diameter and $148.96{\pm}4.88kg/mm^2$ in 0.60mm diameter, and maximum elongation was $5.20{\pm}0.57%$ in 0.45mm diameter. 3. Hardness values of experimental group were similar to control groups. Maximum hardness values were $596.2{\pm}13.66Hv$ in 0.45mm diameter wire of control group I, $590.5{\pm}20.08Hv$ in 0.50mm diameter wire of control group II, and $563.6{\pm}5.35Hv$ in 0.70mm diameter wire of experimental group. 4. Torsion properties of experimental group were similar to control group I and more than control group II. Maximum torsion cycles were $31.8{\pm}2.48$ in 0.45mm diameter of control group I, $17.4{\pm}4.84$ in 0.60mm diameter of control group II, and $24.6{\pm}3.04$ in 0.45mm diameter of experimental group. 5. Maximum bending cycles of experimental group were smaller than control groups. Maximum bending cycles were $9.00{\pm}0.00$ in 0.50mm diameter wire of control group I, $10.0{\pm}0.82$ in 0.40mm diameter wire of control group II, and $8.0{\pm}1.26$ in 0.50mm diameter wire of experimental group. 6. Microstructures of experimental and control groups co-existed with martensited austenite structure and elongated austenite structure. 7. The direction of wire fracture was propagated parallel to torsion direction typically and there was no probability showing wire fracture at inclusions and surface scratches. 8. The type of wire fracture was brittle fracture at initiation site and ductile fracture at core.

• Journal of Life Science
• /
• v.8 no.5
• /
• pp.582-588
• /
• 1998

The male reproductive system of Macrobrachium nipponense consists of a pair of lobulate testes enveloped within a mesenteric sheath extending the length of the carapace. The paired vasa deferentia originated from the mid-lateral region of each testis and extended to the genital pores at the base of the fifth walking legs. The vas deferens has four morphologically distinct regions, i.e., a short and slender proximal region, a long convoluted region, an elongate distal region and an ejaculatory duct that terminates at the genital pore. The sperm mass produced in the testes is surrounded by a basophilic matrix adjacent to the high columnar epithelium and an eosinophilic matrix adjacent to the simple columnar epithelium. The sperm cord is stored in the ejaculatory duct until it is ejaculated. Androgenic gland is found near the subterminal region of the ejaculatory duct between the muscles of the coxopodite of the last thoracic leg. The cell of the androgenic gland is about 6~8 $\mu$m in length, characterized by with extended chromatin in the large nucleus that stained weakly with hematoxylin and there is a large quantity of cytoplasm. The sperm of M. nipponense are typical of the palaemonid type, having a convex, cup shaped head and an elongated spike extending from the centre of the convex head. The spermatophore consisted of an eosinophilic matrix, a basophilic matrix and paired sperm masses which was surrounded by the basophilic matrix. It generally shows a bilaterally symmetrical structure.

• Journal of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.9-23
• /
• 2010

In this paper we examined the association of Infrared Dark Cloud (IRDC) cores with YSOs and the geometric properties of the IRDC cores. For this study a total of 13,650 IRDC cores were collected mainly from the catalogs of the IRDC cores published from other studies and partially from our catalog of IRDC cores containing new 789 IRDC core candidates. The YSO candidates were searched for using the GLIMPSE, MSX, and IRAS point sources by the shape of their SED or using activity of water or methanol maser. The association of the IRDC cores with these YSOs was checked by their line-of-sight coincidence within the dimension of the IRDC core. This work found that a total of 4,110 IRDC cores have YSO candidates while 9,540 IRDC cores have no indication of the existence of YSOs. Considering the 12,200 IRDC cores within the GLIMPSE survey region for which the YSO candidates were determined with better sensitivity, we found that 4,098 IRDC cores (34%) have at least one YSO candidate and 1,072 cores among them seem to have embedded YSOs, while the rest 8,102 (66%) have no YSO candidate. Therefore, the ratio of [N(IRDC core with protostars)]/[N(IRDC core without YSO)] for 12,200 IRDC cores is about 0.13. Taking into account this ratio and typical lifetime of high-mass embedded YSOs, we suggest that the IRDC cores would spend about $10^4\sim10^5$ years to form high-mass stars. However, we should note that the GLIMPSE point sources have a minimum detectable luminosity of about $1.2 L_{\odot}$ at a typical IRDC core's distance of ~4 kpc. Therefore, the ratio given here should be a 100ver limit and the estimated lifetime of starless IRDC cores can be an upper limit. The physical parameters of the IRDC cores somewhat vary depending on how many YSO candidates the IRDC cores contain. The IRDC cores with more YSOs tend to be larger, more elongated, and have better darkness contrast than the IRDC cores with fewer or no YSOs.

• Korean Journal of Animal Reproduction
• /
• v.16 no.1
• /
• pp.21-38
• /
• 1992

The present study was carried out to investigate morphologic changes in the corpus luteum of the pregnant rat by electron microscope after administration of prostaglandin F2$\alpha$(PGF2$\alpha$). Pregnant rates were treated with PGF2$\alpha$(1,500$\mu\textrm{g}$/rat) and their corpura lutea were observed morphologically. The results obtained in this study were summarized as follows ; 1. The weight of the ovaries and corpura lutea were decreased slightly at 8~24 hours after PGF2$\alpha$ administratin but no significant differences were observed. 2. The number of corpora lutea and luteal cells decreased slightly at 12~48 hours and 18~24 hours after PGF2$\alpha$ tretment but there were no signifciant differences between control and treatment. 3. The weight of uterus and the unmber of embryo decreased slightly at 96 hours and at 18~96 hours after PGF2$\alpha$ administration but no significant differences were obtained. 4. In the electron microscopic observatons, lipid droplets which are electron dense and appear in the cytoplasm moderately increased in number after PGF2$\alpha$ treatment. The lipid droplets were surrounded by mitochodria and appeared in the autophagic vacuoles. 5. Moderated and high electron dense mitochondria which are round or elongated in shape showed pleomorphism from 3 hours after PGF2$\alpha$ treatment. Destruction of tubular of vesicular cristae was observed at 6 hours after the treatment. Dense body and myelin figures in matrix of mitochondria were also appeared. 6. Well-developed smooth endoplasmic reticulum(sER) showed tubular or vesicular cisternae. A number of whorl membranes containing ribosomes, mitochondria and lipid droplets were observed at 1.5 hour after treatment. sER was abundant in luteal cells at 12 hours were treatment. 7. Well-developed Golgi pparatus appeared obviously 6 hours and more prominently at 12 hours. Those Golgi vesicles were remarkably dilated. 8. Generally, a few rough endoplasmic reticulum (rER) were appeared after treatment and cisternae showed slight dilatation. No differences among the treatments were observed. However, slight dilation of cisternae was observed at 1.5 hours after treatment. 9. Ribosomes composed of free and polyribosomes were abundant before treatment but polyribosomes were appeared at 12 to 24 hours after treatment. 10. Intercellular space were slightly extended at 3 hours and markedly extended at 12 hours. Numerous microvillous protrusions were observed at these times. Membranous multivesicular structures and autophagic vacuoles were also appeared in the intercellular space. 11. At 3 hours after the treatment, autophagic vacuoles appeared in the cytoplasm of the cell. They increased in number with time and were observed to transfer to the intercellular space. Lysosomal dense body appeared in the cytoplasm and the inclusion body was also observed in nucleus at 12 to 24 hours after treatment.

• Research in Plant Disease
• /
• v.8 no.3
• /
• pp.175-178
• /
• 2002

Two novel casual agents of soybean sprout rot occurred at soybean sprouts cultivated under structure in Suwon area in 1997 were isolated and their pathogenicity was tested in vivo. An isolate formed crowed, black acervuli which were oval to elongated with numerous black, needlelike, intermixed long and short setae, 65~110$\times$3.5~6.6 ${\mu}{\textrm}{m}$. Conidia were curved, lunate, unicellular and hyliane and measured 21.5~22.5$\times$3.5~4.0 ${\mu}{\textrm}{m}$. The other isolate produced conidia with straight and cylindrical, and measured 14.0~17.5$\times$3.5~4.5 ${\mu}{\textrm}{m}$. Apressorium size was measured 6.3~8.5$\times$4.5~5.0 ${\mu}{\textrm}{m}$. The agents were identified as Colletotrichum truncatum and C. gloeosporioides based on their morphological characteristics. There was a large difference in pathogenicity between two isolates. C. gloeosporioides caused dark brownish discoloration of whole plants. It showed high pathogenicity with severe disease development. Meanwhile C. gloeosporiodes caused light brown spots on cotyledon and its pathogenicity was not strong. The soybean sprout rot occurred by the two Colletotrichum species was firstly reported in soy-bean sprout in Korea, and we suggest it as “Colletotrichum rot of soybean sprout”.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.352-358
• /
• 2013

For the germination and differentiation of immature embryos obtained by artificial crossing between tetraploid grape 'Fujiminori' (Vitis vinifera ${\times}$ V. labruscana) and triploid 'Summer Black' (V. labruscana ${\times}$ V. vinifera), were incubated in vitro using MS medium supplemented with $GA_3$ or coconut water (CW) at various concentrations. The percentage of embryo formation of 'Fujiminori' ${\times}$ 'Summer Black' was 64.3%. Embryo germination percentage was higher than 95% in all the $GA_3$ treatments at the concentrations of 0.01, 0.05, 0.25, and $1.25mg{\cdot}L^{-1}$. However, only 15.8-31.6% of the germinated embryos successfully developed into normal plantlets. At higher concentration of $GA_3$, the plantlets developed infirm hypocotyls with over elongated and less enlarged structure. Among the treatments of CW at the concentrations of 5, 10, 15, and 20% (v/v), 10% and 15% were more effective and plantlet achievement percentage were 68.4 and 66.7%, respectively. The addition of 10% CW was most effective to obtain plantlets with optimal shoot length, node and root numbers. 15% CW was suitable to obtain plantlets with longer roots. Accordingly, the embryo culture using the MS medium supplemented with 10-15% CW was observed to be more efficient for germinating and growing the immature embryos produced from artificial crossing between tetraploid grape 'Fujiminori' and triploid 'Summer Black'.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.102-107
• /
• 1998

Solomon's seal (Polygonatum odoratum) seedlings raised through its seeds can replace the rhizomes impelling higher cost for transplanting, This experiment was done to determine the seed characteristics and the germinating processes to give some information on bulk production of seedlings using the seeds. The external or internal morphology of seeds or seedlings grown in lab. or greenhouse was examined mainly with stereomicroscope. The external shape of Solomon's seal seed was hard seed-coat and orthotropous ovule with linear type embryo stretching to the center of seed. Germination proceeded through the several steps. The lower part of seed embryo having the primordia of bulbil and roots first grew before the bulbil and roots was developed from the primordia. The lower part of embryo was enlarged toward the endosperm of seed as soon as seed germinated. Then epicotyl was formed on the apex of bulbil. The epicotyl was elongated after at least 6-week chilling treatment for breaking its dormancy and the first leaf shape was affected by light intensity given during seedling emergence. The bulbil was the first organ of the rhizome used as tea or herb medicine.

• Development and Reproduction
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Spermatogenesis and ultrastructural characteristics of sperm of brackish water diploid Corbicula japonica were investigated by electron microscope observations. Based on the cytological studies, the spermatozoon of this species (brackish water diploid) C japonica is approximately 55 ${\mu}m$ in length. The sperm head (about 12 ${\mu}m$ long) is elongated and tapers with a slight curve. Sperm nucleus is about 7.90 ${\mu}m$ long, and the acrosome is about 2.70 ${\mu}m$ long: The morphologies of the sperm nucleus type and the acrosome shape of this species are a long arrow-like type and long cone-like shape, respectively. The sperm head of this species (external fertilization, dioecious and oviparous species) is partially modified from that of the primitive type, as seen in triploid Corbicula species (internal fertilization, hermaphrodite and ovoviparous species), reported by some authors. However, this species produces uniflagellate spermatozoa, unlike freshwater triploid hermaphroditic clams being possessed of partially modified biflagellate spermatozoa. Diploid C japonica is similar to those of other bivalves being possessed of a short midpiece containing four mitochondria surrounding the centrioles. The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure, and from uniflagellate sperm cross sectioned, in particular, wing-like axonernal lateral fins are observed, as seen in external fertilization fishes.