• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.119-127
• /
• 2021

Small drops in gas cause some problems for downstream equipments such as turbine, compressor and etc. In some cases, we are obliged to remove hazardous liquid mist from gas. In order to remove water or other liquids from the gas, there are some equipments like mesh mist eliminator and vane-plate mist eliminator. oil mist filter is a kind of liquid eliminator equipments used to remove the liquid with 1-10um droplet diameter from the gas. In this paper is determine the factors affecting the oil mist filter efficiency using CFD. length and angle of the filter were considered and the results and compare the results of the efficiency tests, showed error of less than 3%. optimum filter can remove more than 87.3% between 1 and 10um of oil mist.

• 청정기술
• /
• 제21권3호
• /
• pp.191-199
• /
• 2015

선박용 디젤엔진에서 배출되는 황산화물(SO_x)은 건강과 자연에 대해 악영향을 끼친다. 선박운항이 많은 지역별로 전 세계 곳곳에서는 황산화물 배출규제지역(SECA)을 설정하여 엄격한 배출규제를 설정하여 관리를 강화하고 있는 데 선박으로부터 배출되는 황산화물을 줄이기 위한 방법으로 습식스크러버(wet scrubber)의 적용이 확대되고 있다. 본 연구에서는 분무형 습식스크러버의 유동 내부에서 이루어지는 액체의 운동을 모사하기 위한 수치적 모델을 구성하여 전산유동역학적 방법을 이용하여 액적의 거동을 해석하였다. 실제 습식스크러버 적용 시 문제가 되는 액적의 캐리오버(carry over) 문제를 개선하기 위한 방법을 모색하는 것을 특별주제로 하여 스크러버의 배기부에 굽은 판형 액적제거기(wave plate mist eliminator)를 설치하여 액적의 캐리오버 감소효과를 검토하였다. 전산해석은 총 두 단계로 이루어졌는데, 1차적으로 액적제거기가 없는 기본 스크러버에 대해서 해석을 실시하여 스크러버에서 배출되는 기본적인 캐리오버 양을 확인하고, 다음으로 액적제거기를 부착하여 개선효과를 계산하고 비교하였다. 해석결과, 기본형상에서 비산되는 액적은 제안된 분포의 액적 양의 42.0%가 출구로 비산되었으며, 액적 제거기를 설치한 후에는 비산되는 액적은 제안된 분포의 액적 양의 3.4%로 감소함으로서 액적 제거기의 설치로 인해 비산되는 액적이 감소효과를 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.774_775
• /
• 2009

The shape optimization of a Thomson coil actuator used in an arc eliminator is done for fast response by adopting topology modification method. The performance of the actuator is analyzed by using an equivalent circuit method. Both shape optimization and performance analysis are accomplished based on the segmentation of plate. The effectiveness of the proposed method is proved by the comparison of results before and after the shape optimization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.90-92
• /
• 2008

A novel solving technique has been developed to analyze the dynamic characteristics of high speed Thomson-coil arc eliminator. The electromagnetic repulsion actuator based on Thomson-coil is taken as the driving part of the arc eliminator, due to which, the opening and closing time is quite short compare to other type actuators. The electromagnetic repulsion actuator is composed of one repulsion plate and two fixed coils, corresponding to the opening coil and closing coil, respectively. The new solving technique is derived based on the equivalent electric circuit model of the system which is set up by dividing the repulsion plate into multi segments using adaptive segmentation method. This solving technique is applied to the dynamic characteristic analysis of electromagnetic repulsion actuators in high speed Thomson-coil arc eliminators. The calculation results are testified by the FEM calculation results and experiment results.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.282-289
• /
• 2010

A Thomson coil type actuator is applied as the driving unit in an arc eliminator system. To eliminate the arc efficiently, the speed of the actuator is required as fast as possible with certain limit of the exciting current. Therefore, the dynamic characteristics of the Thomson coil type actuator should be analyzed in an effective way. In this paper, a novel solving technique has been developed based on the equivalent circuit model which is set up by dividing the conducting plate into multi segments. To guarantee the calculation accuracy and improve the calculation efficiency, an adaptive refinement algorithm is suggested based on the field continues condition. The proposed method has been verified by the FEM calculation and experiment. The influence of circuit and plate parameters to the performance of the actuator is also investigated, from which a reasonable set of parameters can be found.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.182-188
• /
• 2017

An arc eliminator allows a surge current bypass rapidly into the earth to facilitate the circuit breaking process and increase the stability of the load circuit. Thomson coil actuator (TCA) is a type of actuator that can function as an arc eliminator. The TCA has a simple structure and significantly rapid speed compared to the other types of actuators. In this paper, significant variables, which have a dominant effect on the performance of the TCA, are investigated in detail. Using these variables and an optimization algorithm, an optimal design strategy for the TCA is proposed in this research. The efficacy of the proposed optimal design strategy and the feasibility of the application of the designed TCA for a high power circuit breaker as the arc eliminators are validated through the experiment.

• 설비공학논문집
• /
• 제15권2호
• /
• pp.109-115
• /
• 2003

The performance of two vertical-blade eliminators (V1, V2) and two horizontal-blade ones (H1, H2) for absorption chillers were tested in terms of pressure drop and refrigerant entrainment. The test was carried out using a wind tunnel with a cross section of 300 mm$\times$300 mm. The pressure drop of four eliminators tested was found to be in the rage of 1.0~2.7mm $H_2O$ at the face velocity of 2m/s. In the refrigerant entrainment test the vertical-blade eliminators showed much better performance than the horizontal-blade ones. The horizontal-blade eliminators showed satisfactory results at the air velocity of 2m/s but exceeded the limit value at 3 m/s. Since the cooling capacity of a machine is lowered by about 2.5% at the pressure drop of 1 m $H_2O$, more researches are required to reduce the pressure drop in the eliminator.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 1부
• /
• pp.349-352
• /
• 2011

본 연구를 통해 개발하고자 하는 Wire-Mesh Type Mist Eliminator는 탄화수소(Hydrocarbon)를 취급하는 석유화학 공정 내에서 Vapor 중에 존재하는 $10{\mu}m$ 이하크기의 미세한 액체 Mist를 분리하는데 사용되는 화학 공정플랜트 요소부품이다. 석유화학 공정에서 발생되는 $5{\mu}m$이하의 크기를 가지는 액체 Mist를 제거하기 위해서는 Stainless와 Polypropylene 재질이 혼합된 새로운 WMT Mist Eliminator 국산화 제품개발 시급하다. 실험을 통해 확보한 인자를 바탕으로 제작된 시제품의 분석결과 석유 화학공정에 이용이 가능한 것을 확인하고 성능이 우수함을 알 수 있었다.

• 유기물자원화
• /
• 제26권4호
• /
• pp.45-51
• /
• 2018

본 연구는 도심지 거리 하수 악취 물질인 황화수소($H_2S$)를 제거하기 위해 맨홀에 설치해 악취를 제거하는 맨홀필터 악취제거장치의 적용 가능성을 확인하고자 하였다. 첫번째로 맨홀필터에 들어 있는 첨착활성탄의 황화수소($H_2S$) 흡착 성능 평가 결과 황화수소 제거율이 약 99.8%를 나타냈다. 두 번째로 악취제거장치 성능평가를 위해 서울특별시 대표적인 악취 발생 맨홀 4지점에서 성능을 평가한 결과, 대표적인 악취 유발물질인 황화수소($H_2S$)를 97% 이상 제거하는 것으로 확인되었다. 본 성능 평가 연구결과를 통해 맨홀필터 악취제거장치는 하수관거 맨홀에서 발생되는 악취를 제거하는 장치로써 적용 가능성이 충분한 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제16권2호
• /
• pp.143-146
• /
• 1999

In order to study for Onion ethanolic extract on the Heavy Metal Elimination and antioxidation, the peroxide values of oil and eliminated metal were analyzed. The results are follows: It was very effective as a retardant for autoxidation processing of the soybean and olive oil by the Onion ethanolic extract. Quercetin in the Onion ethanolic extract was affected as a ligand for chelating with some metals. Through out this study, Quercetin in the Onion ethanolic extract was affected as eliminator of the Mercury, Lead, and Cadmium.Abstracts In order to study for Onion ethanolic extract on the Heavy Metal Elimination and antioxidation, the peroxide values of oil and eliminated metal were analyzed. The results are follows: It was very effective as a retardant for autoxidation processing of the soybean and olive oil by the Onion ethanolic extract. Quercetin in the Onion ethanolic extract was affected as a ligand for chelating with some metals. Through out this study, quercetin in the Onion ethanolic extract was affected as eliminator of the mercury, lead, and cadmium.