• Elastomers and Composites
• /
• 제34권4호
• /
• pp.321-331
• /
• 1999

타이어 가황공정(curing process)은 타이어 제조를 위한 최종공정으로 여러 개의 고무배합물 층으로부터 성형된 그린타이어(green tire)를 가황기(mold)내에서 고압/고온 조건하에 유지시킴으로써 원하는 형상을 얻게 하고, 아울러 각 고무배합물이 고탄성을 갖도록 물성을 변화시키는 공정이다. 본 연구에서는 타이어 품질의 향상을 위해 가황공정을 수치적으로 최적화하는 기법을 개발하였다. 먼저, 가황공정 중 가황매체(cure media)의 최적공급 조건을 경정하기 위해 제약조건을 갖는 동적최적화문제(dynamic constrained optimization problem)로 정형화하였다. 즉, 가황기 내의 전열 및 가황 반응 현상을 묘사하는 공정모델로 표현되는 등위제약조건(equality constraint)과 가황매체가 갖는 온도의 한계를 표현하는 부등위제약조건(Inequality constraint) 아래 목적함수를 최적화 시켰다. 다음, 공급되는 가황매체의 최적조건을 결정하기 위해 구성된 최적화문제를 유한요소법(FEM)과 complex 알고리즘을 적용하여 풀었다.

• 한국항공우주학회지
• /
• 제41권8호
• /
• pp.639-648
• /
• 2013

본 논문은 부게넘 및 태안 IGCC플랜트의 연료를 대상으로 석탄으로부터 생성된 합성가스의 NOx/CO배출 특성, 온도특성, 화염의 구조에 대해 기술하였다. GE7EA 모사 가스터빈 연소기를 대상으로 상압 고온 연소시험을 수행하여 입열량 및 질소희석에 따른 연소특성을 관찰하였다. 입열량이 감소하고, 희석제량이 증가할 때 단열화염온도의 감소로 NOx가 감소하였고, 저부하에서는 희석량이 증가할수록 불완전 연소로 인해 CO가 증가하였다. 이러한 NOx 감소 및 CO발생은 각각 $1500^{\circ}C$ 와 $1250^{\circ}C$의 특정 화염온도에서 관찰되었다. 또한 질소 희석이 증가할수록 단열화염온도 및 연소기 라이너의 온도가 감소했고, 화염 부상과 같은 화염구조의 변화로 인해 특이점이 관찰되었다. 본 연구결과를 통해 질소희석이 NOx/CO배출 및 온도, 화염구조에 미치는 영향이 검토되었으며, 시험 데이터는 향후 태안 IGCC 플랜트의 운전시 최적 조건 선정을 위한 기초자료로 활용될 예정이다.

• 콘크리트학회논문집
• /
• 제25권6호
• /
• pp.613-620
• /
• 2013

콘크리트는 고온에 강한재료로 인식되어 왔으나, 화재 등의 고온에 의해 내부조직의 물리 화학적 변화가 발생해 역학적 특성이 저하하게 된다. 이에, 고온시 콘크리트의 역학적 특성의 저하에 관한 연구보고 및 기준이 제시되고 있다. 그러나 고강도 콘크리트 및 하중을 재하한 상태에 관한 연구데이터는 적다. 따라서 이 연구에서는 고온 및 하중재하에 따른 고강도 콘크리트의 고온특성을 평가하였다. W/B 12.5%, 14.5%, 20%의 고강도 콘크리트를 대상으로 비재하상태 및 $0.25f_{cu}$의 하중조건을 설정하여, 고온시의 응력-변형, 최대하중에서의 변형, 압축강도, 탄성계수, 열팽창변형, 단기 고온크리프을 평가하였다. 실험 결과, 압축강도가 높아질수록 가열에 의한 압축강도의 저하가 크게 나타났고, $500^{\circ}C$이상의 온도에서 고온에 의한 열팽창변형과 하중재하에 의한 수축변형이 상쇄되어 압축강도 및 탄성계수의 잔존율이 높아지는 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제16권1호
• /
• pp.31-37
• /
• 1979

The middle point of composition within the system $MgO-Al_2O_3-SiO_2$ has been studied for applicability as ceramics dielectrics. A Kyul Sung Tale of high purity, magnesia clinker of Sam-wha chemical company, C.P. aluminium oxide, calcium carbonate, red lead, barium carbonate which was made into frit were used the raw materials. A number of steatite ceramics were prepared under carefully controlled condition and the water absorption, linear shrinkage, power factor, dielectric constant and dielectric loss were measured at elevated temperature. When we used magnesia clinker as flux, the quantity of this flux was 0.05mole, sintering temperature was continued for 2 hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose power factor was 0.142%, water absorption was zero, linear shrinkage was 8.76%, dielectric constant was 5.63, dielectric loss was 0.00799. When we used red lead as flux, the quantity of this flux was 0.033mole and 0.066mole, sintering temperature was continued for 2hrs. at 1, 26$0^{\circ}C$. From this conditions, we could get the data whose water absorption was zero, linear shrinkage was 8.03%, and 8.48%, power factor was 0.136% and 0.062%, dielectric loss was 0.0072 and 0.0037. When we used barium carbonate made into frit as flux, the quantity of this flux was 0.02mole, sintering temperature was continued for 2hrs. at 1, 27$0^{\circ}C$. From this conditions, we could get the data whose water absoption was zero, linear shrinkage was 8.44%, power factor was 0.138%, dielectric constant was 5.69, dielectric loss was 0.0074.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권6호
• /
• pp.103-110
• /
• 2015

Nitro-aromatic Compounds (NACs) of explosives are structurally non-degradable materials that have an adverse effect to humans and ecosystems in case of emissions in natural due to the strong toxicity. In this study, batch test in the laboratory-scale has been conducted to find some process parameters of alkaline hydrolysis by considering the characteristics of NACs which are unstable in a base status and field application evaluation have been performed on the batch test results. Based on the experimental results of both laboratory and pilot-scale test, the optimum conditions of parameters for the alkaline hydrolysis of soils contaminated with explosives were pH 12.5, above the solid-liquid ratio 1 : 3, above the room temperature and 30 minute reaction time. In these four process parameters, the most important influencing factor was pH, and the condition of above pH 12.0 was necessary for high contaminated soils (more than 60 mg/kg). In the case of above pH 12.5, the efficiency of alkaline hydrolysis was very high regardless of the concentrations of contaminated soils. At pH 11.5, the removal efficiency of TNT was increased from 76.5% to 97.5% when the temperature in reactor was elevated from room temperature to 80℃. This result shows that it is possible to operate the alkaline hydrolysis at even pH 11.5 due to increased reaction rate depending on temperature adjustment. The results found in above experiments will be able to be used in alkaline hydrolysis for process improvement considering the economy.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.119-128
• /
• 2010

본 논문에서는 다양한 방법으로 제작된 복합재 접착 체결부의 강도에 대한 온도 및 습도 환경의 영향을 연구하였다. 시편은 두 가지 종류의 일체성형 방법 외에 동시접착 및 이차접착 등 총 네 가지 방법으로 제작하였고, 상온건조, 고온습도 및 저온건조 환경 등 세 가지 환경에서 강도시험을 수행하였다. 전체적으로 고온습도 환경에서의 파손강도가 상온 환경에 비해 11~23% 가량 높게 나타났고, 저온 환경에서의 파손강도는 동시접착 체결부를 제외하고는 8~21% 가량 상온 강도보다 낮게 나타났다. 시험 환경에 따른 체결부의 강도 차이는 환경에 따른 접착제의 물성 변화가 주 원인인 것으로 분석되었다.

• 한국분무공학회지
• /
• 제24권4호
• /
• pp.157-162
• /
• 2019

This numerical study was analyzed to predict the flammability limits of biodiesel and diesel fuels in the high temperature and pressure conditions. To achieve this, the biodiesel fuel was simulated with the chemical species of n-heptane (n-C₇H₁₆), methyl decanoate (C₁₁H₂₂O₂), and methyl-9-decenoate (C₁₁H₂₀O₂), and the diesel fuel was substituted the chemical species of n-heptane. The closed 0-D homogeneous reactor model which was employed the 1100 K of ambient temperature and 35 atm of ambient pressure was used for the simulation of constant volume combustion, and the equivalence ratio was changed from 0.3 to 2.5 conditions. In addition, a comparative analysis study was conducted with the results of HCCI engine simulation and flammability limits according to the changes of equivalence ratio. The results of combustion temperature, pressure, and ignition delay were increased when the equivalence ratio elevated from 0.3 to 1.3 conditions because the increase in fuel oxidation rate affects the chemical reaction of the overall combustion process. Furthermore, the CO and NO_X production under the rich combustion conditions are considered to have a trade off relationship since the OH radicals and O₂ chemical species are greatly affected the CO and NO_X production and oxidation processes.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.605-611
• /
• 2016

Mg alloy sheet exhibits significant differences in tensile and compressive yield stress depending on the temperature, as well as variations in its hardening behavior. Such unusual behavior makes it difficult to simulate the forming process of Mg alloy sheets. Results of analysis tend to deviate significantly from the experimental data because commercial software do not completely implement the unusual hardening behavior, yield asymmetry and temperature dependent changes in the Mg alloy's material properties. In the previous study, an in-plane tension-compression cyclic tester was developed to predict the cyclic behavior of Mg alloy sheets at an elevated temperature of up to $250^{\circ}C$. A new constitutive equation was suggested to analyze the unusual behavior, and was implemented in the commercial software in the form of user subroutine. In this paper, a stamping process of Mg seat cushion panel for automotive parts was simulated using the experimental data and user subroutine. Based on the analysis, an optimal temperature condition was determined and a stamping die shape at each step was suggested in the non-isothermal stamping of Mg alloy sheets.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.1033-1040
• /
• 2009

고효율 싸이클론의 설계는 압력강하의 최소화와 집진효율의 최대화를 이루는 것이 중요하다. 본 연구는 고온, 고압 조건하에서 신뢰성 있는 컴퓨터 프로그램을 개발하여 싸이클론의 집진효율에 영향을 주는 물리적 메카니즘을 연구하는 것이다. 수치 해석적 연구를 통한 고온, 고압 조건에서의 압력강하 계산은 실험데이터와 비교적 잘 일치하였다. 온도와 압력은 일반적으로 집진효율에 중요한 영향을 미치는데 보통 항력에서 가스의 밀도나 점도 등에 영향을 주어서로 상반되는 결과를 나타낸다. 그러므로 고온 운전에 따른 집진효율의 감소는 고압 조건으로 운전하는 것이 대안이 될 것으로 판단된다. 집진효율에 영향을 주는 인자에 대해 좀 더 세부적인 연구를 위하여 접선방향 속도나 보텍스 파인더의 직경 등과 같은 싸이클론의 설계변수나 운전변수에 따른 연구를 수행하였다. 예상한 바와 같이 접선방향의 속도가 집진효율에 가장 큰 영향을 주었다. 그리고 보텍스 파인더의 직경이 증가할수록 집진효율은 감소하였으며 보텍스 파인더의 길이는 집진효율에 큰 영향을 나타내지 않았다.

• Journal of Animal Science and Technology
• /
• 제58권11호
• /
• pp.39.1-39.12
• /
• 2016

Background: The current study investigates the anti-stress effects of clove (Eugenia caryophyllus) extracts (0, 200, 400, and 600 mg/kg) on serum antioxidant biomarkers, immune response, immunological organ growth index, and expression levels of acute phase proteins (APPs); ovotransferrin (OVT), ceruloplasmin (CP), ceruloplasmin (AGP), C-reactive protein (CRP), and serum amyloid-A (SAA) mRNA in the immunological organs of 63-d-old male black-meated Silkie fowls subjected to 21 d chronic heat stress at $35{\pm}2^{\circ}C$. Results: The results demonstrated that clove extract supplementation in the diet of Silkie fowls subjected to elevated temperature (ET) improve growth performance, immune responses, and suppressed the activities of glutathion peroxidase (GSH-Px), superoxide dismutase (SOD), catalase (CAT), and thioredoxin reductase (TXNRD); reduced serum malonaldehyde (MDA) and glutathione (GSH) concentrations when compared with fowls raised under thermoneutral condition (TC). Upon chronic heat stress and supplementation of clove extracts, the Silkie fowls showed a linear increase in GSH-Px, SOD, CAT, and TXNRD activities (P = 0.01) compared with fowls fed diets without clove extract. ET decreased (P < 0.05) the growth index of the liver, spleen, bursa of Fabricius and thymus. However, the growth index of the liver, spleen, bursa of Fabricius and thymus increased significantly (P < 0.05) which corresponded to an increase in clove supplemented levels. The expression of OVT, CP, AGP, CRP, and SAA mRNA in the liver, spleen, bursa of Fabricius and thymus were elevated (P < 0.01) by ET compared with those maintained at TC. Nevertheless, clove mitigates heat stress-induced overexpression of OVT, CP, AGP, CRP and SAA mRNA in the immune organs of fowls fed 400 mg clove/kg compared to other groups. Conclusions: The results showed that clove extracts supplementation decreased oxidative stress in the heat-stressed black-meated fowls by alleviating negative effects of heat stress via improvement in growth performance, antioxidant defense mechanisms, immunity, and regulate the expression of acute phase genes in the liver and immunological organs.