• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.349-362
• /
• 2016

The numerical solutions of unsteady hydromagnetic natural convection Couette flow of a viscous, incompressible and electrically conducting fluid between the two vertical parallel plates in the presence of thermal radiation, thermal diffusion and diffusion thermo are obtained here. The fundamental dimensionless governing coupled linear partial differential equations for impulsive movement and uniformly accelerated movement of the plate were solved by an efficient Finite Element Method. Computations were performed for a wide range of the governing flow parameters, viz., Thermal diffusion (Soret) and Diffusion thermo (Dufour) parameters, Magnetic field parameter, Prandtl number, Thermal radiation and Schmidt number. The effects of these flow parameters on the velocity (u), temperature (${\theta}$) and Concentration (${\phi}$) are shown graphically. Also the effects of these pertinent parameters on the skin-friction, the rate of heat and mass transfer are obtained and discussed numerically through tabular forms. These are in good agreement with earlier reported studies. Analysis indicates that the fluid velocity is an increasing function of Grashof numbers for heat and mass transfer, Soret and Dufour numbers whereas the Magnetic parameter, Thermal radiation parameter, Prandtl number and Schmidt number lead to reduction of the velocity profiles. Also, it is noticed that the rate of heat transfer coefficient and temperature profiles increase with decrease in the thermal radiation parameter and Prandtl number, whereas the reverse effect is observed with increase of Dufour number. Further, the concentration profiles increase with increase in the Soret number whereas reverse effect is seen by increasing the values of the Schmidt number.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2020

PURPOSE. This study evaluated the influence of prosthesis weight and number of implants on the bone tissue microstrain. MATERIALS AND METHODS. Fifteen (15) fixed full-arch implant-supported prosthesis designs were created using a modeling software with different numbers of implants (4, 6, or 8) and prosthesis weights (10, 15, 20, 40, or 60 g). Each solid was imported to the computer aided engineering software and tetrahedral elements formed the mesh. The material properties were assigned to each solid with isotropic and homogeneous behavior. The friction coefficient was set as 0.3 between all the metallic interfaces, 0.65 for the cortical bone-implant interface, and 0.77 for the cancellous bone-implant interface. The standard earth gravity was defined along the Z-axis and the bone was fixed. The resulting equivalent strain was assumed as failure criteria. RESULTS. The prosthesis weight was related to the bone strain. The more implants installed, the less the amount of strain generated in the bone. The most critical situation was the use of a 60 g prosthesis supported by 4 implants with the largest calculated magnitude of 39.9 mm/mm, thereby suggesting that there was no group able to induce bone remodeling simply due to the prosthesis weight. CONCLUSION. Heavier prostheses under the effect of gravity force are related to more strain being generated around the implants. Installing more implants to support the prosthesis enables attenuating the effects observed in the bone. The simulated prostheses were not able to generate harmful values of peri-implant bone strain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1021-1030
• /
• 2017

This paper describes the algorithm of computing thermal contact conductance between unmatched grid interfaces for finite element thermal analysis. Because grid interfaces should be coincident with adjacent meshes for finite element method, large amount of man hours and huge computations are required to match interfaces between many numbers of complex subdomains. A novel method that distributes feasibly the conductances to interface nodes is proposed. The aims of the method are described, and details of the nodal conductance distribution algorithm with less dependency on meshes are represented. The algorithm can be applied both the flat and curved interfaces in 3 dimensional space, and proposed method can combined with many finite element application including thermal analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.5 no.1
• /
• pp.20-27
• /
• 1981

The alignment of propulsion shaft systems by the fair curve method has been developed over the past twenty years and in recent years its basic problems have been almost solved. At the present time, studies on introducing actual conditions are being undertaken. In a fair curve alignment, its aim is to achieve a stable shaft system which will be relatively insensitive to misalignment or the influence of external factors such as thermal variations due to the sunshine, speed change, etc. The key point of fair curve alignment is the calculations of reactions in the straight support and reaction influence numbers. The present authors have developed those calculating method by the matrix method of the three-moment theorem. The fair curve alignment is based on the analysis of propulsion shaft system which is assumed as a continous beam on multiple support points. The propeller shaft is divided into several elements. For each element, the nodal point equation is derived by the three-moment theorem. Reaction of supporting points of straight shaft and reaction influence numbers are calculated by the matrix calculation of each nodal point equation. It has been found that results of calculation for the model shaft agree well with those of experiment which had been measured by the strain gauge method. Results of calculation for the actual propulsion shafting of the steam turbine had been compared also with those of Det norske Vertas.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.297-305
• /
• 1998

The finite element method is used for the study of the eigenvalue problems of partially fixed end beams with intermediate elastic supports. The elastic critical loads and natural frquencies of the beams are investigated by changing the numbers of elastic supports and their stiffness, and also by changing Kinney's fixity factor, $f_a$. The relationship between two eigenvalues is established by calculating the corresponding values of $(w/w_n)^2$ through changing $(P/P_{cr})$ values. The results of this study are as follows : (1) The elastic critical loads and natural frequencies of beams increase with increases in Kinney's fixity factor, $f_a$ and with the increased numbers of intermediate elastic supports. (2) The relationship between elastic critical loads and the natural frequencies of partially fixed end beams with intermediated elastic supports is $P/P_{cr} + (w/w_n)^2/ = 1$ without regard to Kinney's fixity factor, the stiffness of elastic supports, or the number of elastic supports.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1314-1322
• /
• 2000

The acoustic property of reactive type single expansion chamber can be analyzed by traditional plane wave theory. This theory can be applied in low frequency range and has good performance. But this theory can't include higher order modes, therefore another method is essential to analyze acoustic filter in high frequency range. Many researcher suggested the method that can concern higher order modes, and their methods are using mode matching technique. But there is no method that can be applied to the analysis of single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber. In this paper, the method which can analyze single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber using fundamental mode matching technique, was suggested and the predictions by this method was compared with those by the finite element method, and the influence of inlet/outlet location to acoustic performance of single expansion chamber is investigated and explained by higher order mode effects.

• Bulletin of the Korean Mathematical Society
• /
• v.31 no.2
• /
• pp.237-242
• /
• 1994

One of the most well-known geometric lattices is a partition lattice. Every upper interval of a partition lattice is a partition lattice. The whitney numbers of a partition lattices are the Stirling numbers, and the characteristic polynomial is a falling factorial. The set of partitions with a single non-trivial block containing a fixed element is a Boolean sublattice of modular elements, so the partition lattice is supersolvable in the sense of Stanley [6]. In this paper, we rephrase four results due to Heller[1] and Murty [4] in terms of matroids and give several characterizations of partition lattices. Our notation and terminology follow those in [8,9]. To clarify our terminology, let G, be a finte geometric lattice. If S is the set of points (or rank-one flats) in G, the lattice structure of G induces the structure of a (combinatorial) geometry, also denoted by G, on S. The size vertical bar G vertical bar of the geometry G is the number of points in G. Let T be subset of S. The deletion of T from G is the geometry on the point set S/T obtained by restricting G to the subset S/T. The contraction G/T of G by T is the geometry induced by the geometric lattice [cl(T), over ^1] on the set S' of all flats in G covering cl(T). (Here, cl(T) is the closure of T, and over ^ 1 is the maximum of the lattice G.) Thus, by definition, the contraction of a geometry is always a geometry. A geometry which can be obtained from G by deletions and contractions is called a minor of G.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.227-232
• /
• 2002

Enormous flocks by the reduced life cycle of products caused by the technological innovation if later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.33-43
• /
• 2003

Enormous stocks by the reduced life cycle of products caused by the technological innovation in later 20 century, development of new materials and diversified demands of customers appeared as the pressing element causing the trouble in management of companies, and when considering the logistic costs that are imposed to companies in terms of function, the costs related to the stock topped the list of costs, followed by the transportation ones, and for pallet pool system, inventory of stocks is very difficult by the number of companies. Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent pallet system that is the core of unit load system, and the purpose of consistent pallet system is the treatment of logistic functions such as transportation, storage and unloading with consistent pallet system, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, more pallets will be used so, numbers of empty pallets will be increased accordingly by returning the pallet. Therefore, in this study, we will establish the effective stock management system by comparing with the other existing stock management system after looking at the concept and examples of pallet full system in order to resolved this kind of problem.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.2040-2050
• /
• 2007

In this study, we present a novel method for estimating the information of MU(motor unit) which is the basic element of human muscle by using surface EMG. Some of the method developed in this field could only estimate the numbers of MU that is activated. However, in our study the MU-simulator based on the line source model was designed to estimate the MU information including the numbers of MU and muscle fiber, conduction velocity, MU diameter, fiber diameter, and end plate position. The SMUAP(single motor unit action potential) detector was designed and CMAP(compound muscle action potential) by electrical stimulus was recorded. With these data, the MU-simulator can estimate the MU information by varying muscle paramater settings through MSE(mean square error) method. Our results shows that the proposed method can be comparable with the method of anatomical studies. Moreover, our system can be utilized to build a tool for diagnosis and treatment assessment of neuromuscular patients.