• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.366-370
• /
• 2006

An optical microphone incorporating a reflective diaphragm and a fiber-optic head was demonstrated. The diaphragm was made of a micromirror membrane which is suspended by a silicon bar connected to a frame, allowing fer a displacement induced by acoustic waves. A compact, simple optical head was implemented by exploiting a single multimode fiber. For the assembled microphone, the static characteristics were investigated to find the operation point defined as the optimum distance between the head and the diaphragm, and a flat frequency response with a variation of $\sim$2dB for the range of up to 2 kHz was accomplished.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.917-922
• /
• 2016

There are many researches related on the brain wave signals to monitor the state of human health. Especially, some patients in the medical hospital need to be monitored in case of emergencies such as a seizure, an epilepsy and so on. To support QoS of the brain wave network in the hospital is a vital issue and the Opnet simulator is used for this experiment. So the efficient network topology is required for the stability of the brain wave network service. The brain waves of the patients are collected from the sensor devices in the network. Two different sensor network topologies are suggested and simulated for the comparison of the network performance. One topology is localized and the other is non-localized network. The simulation is operated with the Opnet simulator.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.309-314
• /
• 2013

This paper dealt with the radiated electromagnetic wave detection of partial discharge (PD) in oil for insulation diagnostics of oil-immersed transformers. Three types of electrode system were fabricated to simulate the insulation defects that could occur in oil-immersed transformers. Frequency components of radiated electromagnetic wave in oil was measured by broadband bi-conical antennas of 300 MHz~2 GHz and a spectrum analyzer of 9 kHz~3 GHz. Frequency component of electromagnetic waves from PD in oil were highly distributed at 500 MHz. From the result, a narrow-band monopole antenna with the center frequency of 500 MHz was fabricated. We could detect PD signal in insulation oil without an influence of external noise by a measurement system which consists of the prototype monopole antenna, a LNA (Low Noise Amplifier), an oscilloscope and a spectrum analyzer.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.445-450
• /
• 2016

In this paper we study the effect of chaos in nonuniform instability with optical fiber based IoT networks. The transient response of optically controlled fiber has also described. Nonlinear optical fiber effects especially fiber scattering in networks has emerged as the essential means active optical devices. The paradigm instability in fiber Internet serves as a test for fundamental study of chaos and its suppression and exploitation in practical application in optical communication. This paper attempts to present a survey and some of our research findings on the nature of chaotic effect on Internet based optical communication. The transient response in optical fiber has been evaluated theoretically by calculating the variation of the scattering function. The lines has used under open ended termination containing optically induced region. The scattered optical waves in a fiber used in optic communications are temporally unstable above certain threshold intensity.

• Journal of Biomedical Engineering Research
• /
• v.29 no.4
• /
• pp.278-285
• /
• 2008

In this study the complex-valued continuous wavelet transform (CWT) has been applied in detection of Electrocardiograms (ECG) as response to various signal classification methods such as Fourier transforms and other tools of time frequency analysis. Experiments have shown that CWT may serve as a detector of non-stationary signal changes as ECG. The tested signal is corrupted by short time events. We applied CWT to detect short-time event and the result image representation of the signal has showed us that one can easily find the discontinuity at the time scale representation. Analysis of ECG signal using complex-valued continuous wavelet transform is the first step to detect possible changes and alternans. In the second step, modulus and phase must be thoroughly examined. Thus, short time events in the ECG signal, and other important characteristic points such as frequency overlapping, wave onsets/offsets extrema and discontinuities even inflection points are found to be detectable. We have proved that the complex-valued CWT can be used as a powerful detector in ECG signal analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.162-168
• /
• 2006

Recently, diagnosis techniques have been investigated to detect a Partial Discharge associated with a dielectric material defect in a high voltage electrical apparatus, However, the properties of detection technique of Partial Discharge aren't completely understood because the physical process of Partial Discharge. Therefore, this paper analyzes the process on surface discharge of polymer insulator using wavelet transform. Wavelet transform provides a direct quantitative measure of spectral content in the time~frequency domain. As it is important to develop a non-contact method for detecting the kaolin contamination degree, this research analyzes the electromagnetic waves emitted from Partial Discharge using wavelet transform. This result experimentally shows the process of Partial Discharge as a two-dimensional distribution in the time-frequency domain. Feature extraction parameter namely, maximum and average of wavelet coefficients values, wavelet coefficients value at the point of $95\%$ in a histogram and number of maximum wavelet coefficient have used electromagnetic wave signals as input signals in the preprocessing process of neural networks in order to identify kaolin contamination rates. As result, root sum square error was produced by the test with a learning of neural networks obtained 0.00828.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.840-845
• /
• 2005

A three branches vortical Hall sensor for detecting rotation angle of brushless motor has fabricated. The sensor is constructed three branches of $150{\mu}m$ width and $300{\mu}m$ distance from central electrode to Hall electrode. Each branch has one Hall output and one Hall input. The central electrode acts as common driving input. According to rotation angle change of brushless motor, sensor gives three position signals phase shifted by $120^{\circ}$. The sensitivity of sensor is 200V/A$\cdot$T at magnetic field of 0.1 T and constant driving current of 1mA. It has also showed three sine waves of Hall output voltages with $120^{\circ}$ phase over one motor rotation. The noise can limit sensor's resolution. We have measured sensor's noise characteristics. The detectable minimum magnetic field is $20{\mu}T$ at driving current 1mA, measured frequency 1 kHz and bandwidth$({\Delta}f)$ of 1Hz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.163-170
• /
• 2011

This study proposed the composition of a new long-code MMSE detector using the pilot channel that demonstrated the most excellent performance under Rayleigh fading in the previous studies. It analyzed and explained how to maintain the stability of the weight vector(introduction to the course of radio waves) in the receiver. In the operation of the receiver system to remove radio interference, the signal vector distortion received in the channel where fading was present achieved good results by compensating for signal errors. When there was distortion, the response characteristics of the received signals were superior to the common matching filter according to the computer simulation. The long-code MMSE receiver proposed in the study was able to prolong the cycle by $16{\times}T_b$ in the fading environment to fulfill the satisfaction.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.433-438
• /
• 2020

Nodes on a data communication path in a wireless network emit electro-magnetic waves whenever they transmit packets; thus, the path can be exposed and identified with capturing and analyzing a sequence of the signals emitted there. One of countermeasures against a malicious eavesdropper is to let certain nodes mimic the nodes on the data path in sending dummy packets. In this paper we propose a packet transfer protocol which establishes the shortest path between source-destination pair a time and restricts heavy generation of dummy packets. We verify the location-privacy of a node on the communication paths through simulation.